建立了炉体结构的计算传热学分析模型，利用经典的传热理论进行了详细的传热分析设计。
The Calculating heat transfer model of gas producer was established. The detailed analysis on it was done with the classic theory of heat transfer.
根据电热基本原理和传热学理论推导出了直接电热电阻炉在恒压加热制度下，电热参数的计算方法。
Based on electrothermal principle and heat transfer theory, calculation formulas of electro heat parameters for direct resistance heating appliance are deduced in this paper.
本文建立了炉缸炉底的传热学模型，编制了通用的炉缸炉底温度场计算软件。
The heat transfer mathematical model of hearth bottom was established, a general computational software of hearth bottom temperature field was programmed.
应用传热学理论计算分析了高炉冷却水的稳定性、冷却水的水速、冷却水管与冷却壁本体的间隙及冷却壁的高度对长寿高效高炉冷却壁寿命的影响。
In this paper, effect of the cooling water stability, cooling water velocity, gap between cooling water pipe and stave and height of stave on the stave life is analyzed by heat transfer theory.
本文根据电热原理和传热学理论推导出了电接触加热时间的计算公式，并通过实验进行了验证。
Based on electrothermal principle and heat transfer theory, a calculation formula of direct electro heating time was deduced in the paper. An experiment was carried out to testify the formula.
根据计算流体力学与传热学原理，建立了描述铝合金电阻点焊液态熔核流动行为和传热过程的轴对称有限元模型。
Based on theories of computational fluid dynamics and heat transfer, an axial symmetry finite element model of velocity and temperature field of spot welding for aluminum alloy is established.
根据传热学方程，计算了电炉出钢过程钢包炉衬温度分布及钢水温度随时间变化的规律。
According to the thermodynamic equations, the laws of ladle lining temperature distribution and the real-time temperature of molten steel in ladle during tapping are calculated.
本次研究主要内容是把传热学理论与计算机数值模拟相结合，用以模拟高温(火灾)作用下钢管混凝土温度场的变化。
By combining heat transfer theory with computer numerical value simulation, this study simulates temperature field 's variety of CFST with high temperature.
其次，介绍了传热学的基本原理、PCB简化模型的数值求解和PCB的有效导热系数的计算。
Secondly, it is introduced that the basic principles of heat transfer and the numerical solution of Compacted Model of PCB and effective thermal conductivity of PCB calculation.
本文采用I -DEAS软件作为计算机辅助分析的工具，基于弹塑性有限元理论和传热学理论，建立了工作状态下主轴系统的有限元分析方法及技术处理方法。
Based on elastic FEM theory and heat transfer theory, the author USES I-DEAS software as a CAE tool, builds the finite element analysis method and techniques of the principle shaft system on work.
笔者在给定加热功率下，利用计算流体力学（简称CFD）和传热学相结合的方法计算了风速管的表面温度。
Surface temperature of an anemometer heated by a given power was calculated by CFD and heat flux analysis.
在相同工况条件下，用传热学计算的方法对比了原位燃烧合成陶瓷保护层高炉风口与无阻热层的紫铜风口的节能效果。
At the same condition, effect of energy-saving of tuyere with the Situcombustion synthesized ceramic-lined material and tuyere without a single insulator is compared by calorifics calculation.
从传热学基本原理出发，推导出结晶性平板状注塑制品冷却时间的几种计算方法。
Several methods to determine the cooling time of injection molded slabs of crystalline plastics are discussed based on the theory of heat transfer.
在实验基础上，从传热学的角度建立了木块内部温度场的简化模型，数值计算结果与实验结果吻合较好。
A simplified theoretical model for the change of the interior of the wood was developed based on heat transfer theory, and the calculated values were in good agreement with the experimental results.
为了解决滚塑成型工艺中加热时间难以确定的问题，依据传热学和界面运动理论进行了滚塑成型加热时间的研究，提出了模具和树脂粉料加热时间的计算方法。
The heating times during the rotational molding of the hollow plastic products were studied according to the theory of heat transfer and interfacial movement, and an algorithm was proposed.
并根据传热学基本知识，分析计算了燃烧室辐射传热、烟气自然对流传热和搅拌强迫对流传热。
According to basic knowledge of heating transfer author studies heating transfer in the aspect of firebox radiation, smoking natural convection and Mixing forced convection.
根据传热学建立了脉冲热压焊的焊咀温度分布模型，对该模型进行分析、计算，得到了焊咀端部温度分布是否分布均匀的临界尺寸公式。
The model was analyzed and established, then the formula of critical dimension was got, which was related to the temperature distribution of heater tip.
基于传热学的相关知识，提出一种计算直升机机身温度场的方法。
Based on knowledge of heat conduction, this paper calculates temperature field of a helicopter with heat source method.
本文根据传热学的基本原理，采用冷却单元计算法推导得到了一套完整的关于扁圆管单面贴壁冷却方式的理论计算方法。
In this paper a theoretical calculation method of one-side cooling of flattened tube welded on a wall was obtained by calculation of cooling elements.
从传热学中的特征式关联式出发，给出一种电流引线冷却面积的计算方法，并以黄铜为例计算了电流引线的结构尺寸。
The section area can be worked out according to relational formula of characteristic formula in the heat transfer. As an example, the structural dimension of…
依据传热学理论和鼓式制动器的结构特点，建立了制动鼓瞬态温度场数值模拟的有限元计算模型。
Finite element model of band brake transient temperature field is built considering heat transmission theory and drum brake structural features.
根据渗流力学、岩石力学、传热学、断裂力学知识，建立了油水井三维水力压裂模拟计算的数学模型。
According to the theory of fluid mechanics in porous media, rock mechanics, heat transferring and fracture mechanics, the mathematic model is established to characterize 3d hydraulic fracturing.
根据渗流力学、岩石力学、传热学、断裂力学知识，建立了油水井三维水力压裂模拟计算的数学模型。
According to the theory of fluid mechanics in porous media, rock mechanics, heat transferring and fracture mechanics, the mathematic model is established to characterize 3d hydraulic fracturing.
应用推荐