针对表面安装式永磁同步电机，给出了电机解耦模型，分析了电枢绕组的电感饱和效应，提出了一种判断初始转子位置的综合性方法。
A novel initial rotor position estimate method is proposed on the surface mounted permanent magnet synchronous motor (PMSM), which is based on the PMSM de-coupled model analysis.
若要获得良好的封装和合理的解耦，您的组件应当符合正确的组件模型。
To have good encapsulation and proper decoupling, your component should fit a true component model.
由于一个较大的(父)流程中包含许多已解耦的流程模型，所以不再可能为父流程及其所有流程组件生成单一监控模型。
With many decoupled process models forming part of a larger (parent) process, it is no longer possible to generate a single monitor model for the parent process and all its process components.
我们现在除了拥有已解耦的业务流程，最终还得到了相应的“已解耦”监控模型，并且作为一种副产品，我们还实现一种更加模块化的监控方法。
In the same way that we now have decoupled business processes, we also end up with corresponding "decoupled" monitor models and, as a by-product, a much more modular approach to monitoring.
发布/订阅消息模型极其强大，可以将UI元素本身及UI元素与服务器端进行解耦。
The publish/subscribe messaging paradigm is EXTREMELY powerful and enables clean decoupling of user-interface elements from each other, and from the serverside.
用该非线性控制方法设计的飞行控制系统不仅能够实现动态解耦控制，获得良好的动态性能，而且对模型不够准确或系统内部参数发生变化具有较强的适应性。
Flight control system designed by this nonlinear control method can achieve decoupling control, and has better adaptability to inaccurateness of model and the change of system parameters.
这种分级解耦的方法即可用于线性动态模型又可用于非线性动态模型。
It can be used not only in linear dynamic model, but also in nonlinear dynamic model.
利用建立在对称分量解耦-补偿理论基础上的电力元件模型，提出了适用于谐波潮流计算的网络模型和算法。
By using the power element models established on symmetrical component decoupling - compensation theory, a network model with algorithm suitable for harmonic flow calculation is developed.
为保证闭环控制系统的鲁棒性，设计了基于交流电机的矢量变换模型的多变量解耦控制器。
To ensure the system robustness, a multi-variable decoupling controller was designed based on the vector transform model of AC motor.
针对多变量非线性离散时间系统设计多模型神经网络解耦控制器。
A multiple models neural network decoupling controller is designed to control the multivariable nonlinear discrete time system.
而当模型数目相同时，系统的暂态响应、解耦效果都大为改善。
If the same number of the fixed models is used, system transient response and decoupling result are improved.
经过适当的输入变换和动态解耦，结合轧辊的热传输特性，最后获得了简单、实用的轧辊局部冷却控制模型。
By proper transforming of the system input and dynamic decoupling, a simple and useful model for partial cooling control has been obtained on the basis of the thermal transfer characteristic of rolls.
基于系统的状态空间模型，利用动态输出反馈，给出了鲁棒干扰解耦的条件。
Based on the state space model systematized, and applying the dynamic output feedback, the conditions for robustness disturbance decoupling are proposed in the paper.
本方法模型简便实用，不必进行解耦即可处理耦合传输线，并可很容易地应用于非均匀传输线的分析。
The model of this method is simple and practical and it can be applied to coupled transmission lines without decoupling and nonuniform transmission lines very easy.
在建立电流源型PWM变流器稳态数学模型的基础上，分析了系统的耦合关系，提出了一种基于小偏量线性化的前馈解耦控制方案。
On the basis of the stationary state mathematical model of a PWM current-source converter, the paper analyzes the coupling of a converter and presents a simple decoupling feedforward control method.
同时，规划出了满足性能指标、理论要求，并且完全解耦的参考模型。
Furthermore, reference model designed for the system meets performance target, theory matched requirement, and achieves complete uncoupling.
文中提出了一种基于线性化模型的冷连轧机pi解耦控制方案，仿真结果证明该方法的有效性。
A method named the PI decoupling control of a tandem cold mill based on a linearized model is presented. Results of simulation show that the method is available.
在系统精确模型参数未知的情况下，神经网络逆系统可将被控系统解耦成两个SISO线性子系统；
Without knowing the precise system model and parameters, the ANN inverse can decouple the controlled system into two SISO linear systems.
分别对构造模型和传感器实验数据进行补偿与解耦。
Both the constructed models and sensor's experimental data are compensated and decoupled.
本文主要讨论磁悬浮实验列车模型的解耦控制问题。
In this paper, decoupled control problem of the magnetic suspension test vehicle model is discussed.
通过解耦，三轴转台系统成为三个单输入，单输出线性系统，为理论分析设计控制系统提供了转台模型。
The model is transformed into three single input and single output linear systems, and then it can be analyzed and designed by the linear system theory.
建立了三相电压型PWM整流器电流控制数学模型，输入电流在静止坐标系下实现了固定开关频率的解耦控制。
In this paper, a current control mathematical model is established with fixed switching frequency for three-phase pulse width modulated (PWM) converter.
本文介绍了一种简化模型的感应电机电压解耦控制原理的基础上。
This paper describes a simplified model of induction motor based on voltage decoupling control principle.
传统的解耦控制综合方法，对耦合对象的数学模型依赖性较大，因此限制了它在工业领域内的应用。
Traditional decoupling controlling comprehensive method is quit dependent on mathematical model of coupling object, so its application is limited in industry control field.
该文设计了全维非线性未知输入观测器，实现检测滤波器对于被控对象模型误差和系统不确定性因素的干扰解耦。
This paper realizes disturbance de-coupled with model error and system uncertainty by using a combination of full-order nonlinear unknown input observer and fault detection filter.
采用新型对角回归神经网络来辩识系统模型，可对PID控制器参数进行整定，实现多变量解耦控制。
Adopting new type diagonal regression neural network to identify the system model, the parameters of PID controller have been set, and the multi -variable decoupling control being realized.
本文的主要工作是模型仿真、系统的耦合性分析、多变量pid解耦控制器设计及多变量预测控制器设计。
The main focuses of this thesis are model simulation, coupling analyses, decoupling PID controller design and multivariable predictive controller design based on wastewater treatment Benchmark.
本文从某三轴转台的模型出发，分析了耦合对系统的影响，并通过非线性解耦方法对系统进行了解耦设计。
Based on the model of there-axis turntable, the analysis of decoupling's influence on system and the decoupling design of the system by the method of nonlinear decoupling are presented.
本文从某三轴转台的模型出发，分析了耦合对系统的影响，并通过非线性解耦方法对系统进行了解耦设计。
Based on the model of there-axis turntable, the analysis of decoupling's influence on system and the decoupling design of the system by the method of nonlinear decoupling are presented.
应用推荐