提出一种基于线结构光的回转式视觉测量系统。
A rotating measuring system based on structured light vision sensor is proposed.
介绍了一种新研制的两维计算机视觉测量系统。
This paper describes a new 2-d measurement system with computer vision.
成像标定及图像分析、处理是视觉测量系统的关键环节。
Imaging calibration, image analysis and image processing are key components in vision inspection system.
视觉测量系统，可变焦数字照相测量系统等图像测量方法。
Vision measurement system, but image measuring techniques and so on focal variation numeral photography measurement system.
其次，为了控制多传感器视觉测量系统而构建了CAN总线控制系统。
Secondly, the CAN bus control system for controlling multi-sensor visual measuring system is carefully structured.
研究了一种用于移动机器人进行三维感知的被动双目立体视觉测量系统。
A passive binocular vision measuring system for 3d-perception of mobile robot is studied.
本文使用十字线激光器，配置CCD相机组成十字线结构光视觉测量系统。
Cross semiconductor laser and CCD camera are used to set up a vision inspection system in this paper.
摄像机标定方法的选择和标定精度直接影响着轮对动态视觉测量系统的精度。
The accuracy of vision measurement system is influenced by choices of the calibration method and calibration accuracy.
初步开发了基于三维视频全站仪的视觉测量系统，并将其应用于林业测量中。
Exploit a vision surveying system which based on 3-d video total station primarily. Experiment in wood measure shows that this its effective.
在三维机器视觉测量系统中，二维数字图像边缘提取是进行三维坐标计算的必要前提。
In the 3d machine vision measuring system, the edge extraction of a 2d image is the prerequisite for 3d coordinate calculation.
在三维立体视觉测量原理的基础上，建立了用于微波天线面形测量的三维视觉测量系统。
On the basis of the principle of 3 D stereo vision measurement, a 3 D vision measurement system for the shape measurement of microwave antenna is constructed.
成像系统标定是机器视觉测量系统所成图像和实际被测尺寸之间实现高精度转换的关键过程。
The calibration of a camera system is a key step to the precise conversion between an image of machine vision and the real dimension.
提出了一种光笔式单摄像机三维坐标视觉测量系统，其主要由光笔、摄像机和笔记本电脑组成。
A light-pen single camera 3-D coordinate vision measurement system is proposed in this paper.
在基于线结构光的视觉测量系统中，激光光条中心的提取精度是影响系统最后精度的关键因素。
In structured_light vision system, the accuracy of laser stripe center position is the main factor that determines the final system accuracy.
为了控制多视觉传感器的大型视觉测量系统，本文提出了一种基于CAN总线的分布式控制系统。
To control large visual measuring systems with multiple visual sensors, a distributing control system based on CAN bus is developed.
试验过程中采用了非接触式的计算机视觉测量系统，避免了在天线上安装传感器对天线结构造成的影响。
During the experiment, using non-contact computer vision measurement system was used to avoid the affect of the installation of sensors on the antenna.
设计了一机器视觉测量系统，识别一幅图像中是否存在确定大小和形状子图像，若有则识别出它的位置。
This project is designed to set up a system of Machine Vision Detection based on the pattern Recognition and to study questions concerning system modeling.
实验结果表明，该校准技术能够满足视觉测量系统的要求，也可以满足视觉测量系统对相机参数的特殊要求。
Experimental results show the proposed method can satisfy the requirements for camera calibration of a vision measurement system.
基于红外led的光学测棒是大空间三维视觉测量系统的成像目标，也是影响系统测量精度的关键因素之一。
Optical probe based on infrared LED, used as the object of imaging of the large-space 3d vision measurement system, is also one of key factors that affect the accuracy of the system.
系统的标定精度直接决定了系统的实际使用精度，而标定方法又直接影响着视觉测量系统的使用方便性和可靠性。
The actual accuracy is due to the calibration accuracy. Calibration methods affect the convenience and dependability of an optical measurement system directly.
摘要：针对双目视觉测量系统存在误差因素繁多、分析困难等问题，提出了一种基于灰色关联技术的误差分析方法。
Abstract: According to the excessive error factors and difficult analysis of the binocular vision measurement systems, an error analysis method based on grey incidence technology was proposed.
在对以上两种视觉测量系统的技术特点进行对比的基础上，分析了二者在国内外汽车车身生产线中的应用情况和发展趋势。
Make a comparison to the characteristics between these two vision measuring system and analyze the developments and applications in the white bodys production line.
给出了三维机器视觉测量系统中激光线图像与零件特征边缘图像交点的求解方法，为三维机器视觉测量系统的三维坐标计算奠定了基础。
An appropriate way is given for calculating the intersection points of the parts image edge and the laser image line. The work in this paper makes the 3d coordinates calculation possible in...
文章介绍的CAN总线控制系统实现了多视觉传感器的分布式网络化控制，尤其适合对实时性、可靠性和精度等要求较高的大型多传感器视觉测量系统的实时控制。
Based on CAN bus control system, distributed network control of multiple visual sensor was realized. It specially suitable to realtime control of large scale multiple sensor visual...
应用SCL- 90量表及神经行为测试系统（NES-C2 ）测量舰员与学员出海前后的情感状态、心算、符号译码、视觉保留等因子。
The symptom checklist 90(SCL 90) and neurobehavior evaluation system(NES C2) were used to measure the mood state, mental arithmetic, symbol substitution and visual retention factors.
由多条纹结构光投射器与CCD相机组成的视觉系统，广泛应用于非接触在线测量领域。
The vision inspection system consisting of multi-stripes projector and CCD camera finds a wide application in non-contact and online measurement.
对叶片视觉图像进行预处理，提高测量系统对图像的识别精度。
The image of blade vision is pro treated for improving identify precision of the system image.
探讨利用计算机视觉系统对目标物体平面图形面积和面积惯性矩的测量方法。
A method for measurement of area and moment of inertia of plane figures grabbed by computer vision system is presented in this paper.
提出了一种基于测量与校准功能合一的光学测棒的立体视觉坐标测量系统。
The paper proposes a stereo vision coordinate measurement system based on optical probe with the function of measuring and calibrating.
提出了一种基于测量与校准功能合一的光学测棒的立体视觉坐标测量系统。
The paper proposes a stereo vision coordinate measurement system based on optical probe with the function of measuring and calibrating.
应用推荐