实时视觉检测系统的一个主要瓶颈是图像的处理速度。
A bottleneck of the real-time vision inspection system is the lower image processing velocity.
摄像机标定是机器视觉检测系统研究的重点问题之一。
Camera calibration problem is one of key issues of machine vision research.
在此基础上，已成功地研制出一种机器视觉检测系统。
本文开发了适应在线检测需要的轴承外径机器视觉检测系统。
A machine vision system for bearing outer diameter inspection was developed to meet the requirement of online inspection.
机器视觉检测系统的应用，实现了整个激光修阻系统的自主修刻。
The application of machine vision inspection system to achieve the overall resistance of laser repair system of self-repair carved.
利用激光切割同轴视觉检测系统，获得了火花簇射的同轴视觉图像。
The image of sparks jet has been obtained based on the coaxial visual sensing system.
本文中所阐述的处理方法对实际机器视觉检测系统具有一定的普遍意义。
The processing method described in the paper has a common significance for the practical machine vision detection system.
建立了侧面视觉检测系统，对激光切割过程中火花簇射行为进行分析。
The behavior of sparks has been investigated by side imaging the sparks jet.
本文提出了视觉检测概念，建立了用于三维尺寸测量的视觉检测系统。
In the paper, the visual inspection conception is presented and a visual inspection system is established for 3-d dimensional measurement.
开发了适应大批量流水线生产和检测需要的轴承内外径机器视觉检测系统。
A machine vision system for inspection of inner and outer diameters of bearings was developed for a pipeline production and inspection.
介绍了在大批量定制生产和检测中所需使用的硬盘驱动架尾孔的机器视觉检测系统。
The paper presented a machine vision system for inspecting the diameter of the tail-hole in a hard disk driving shelf which was needed in mass customization production and inspection.
原木表面节子的计算机视觉检测系统的设计是合理的，具有坚实的理论基础和可行性。
The detecting system of log's superficial knots by computer vision is reasonable, and its detecting principles have a sound theoretical basis.
介绍了利用安装于三坐标测量机CMM上的激光测头测量自由曲面的立体视觉检测系统。
A stereovision inspection system for measuring free-form surface is introduced which consists of coordinate measuring machines (CMM) and a laser probe.
在检测误判率足够低的前提下，检测速度通常是制约视觉检测系统在线应用的关键因素。
Under the premise of the sufficiently low misjudgment ratio, inspecting speed is the key factor for the application of vision inspection system.
文中从本人设计并完成的机器视觉检测系统中筛选出两个具代表性的系统进行详细论述。
Two machine vision measurement systems are picked from all systems which are all designed and finished by myself.
具体地分析了指针式仪表的几何特征参数，在此基础上提出指针式仪表视觉检测系统的测量原理。
On the basis of concrete analysis of the geometric feature parameters of the gauge, the measuring theory of the computer vision test system is suggested.
本论文着重于对电池夹的机器视觉检测系统的系统分析、软件模块的实现以及软件合成技术的研究。
This thesis focuses on the research of battery clamp Inspection for machine vision system, software achievement and software synthesis.
CMOS数字图像传感器具有功耗低、体积小、集成度高等优点，能够满足分布式视觉检测系统的要求。
CMOS digital image sensor has the merits as low power, small size and high level of integration, which can meet the demand of distributed visual inspection system.
在本系统中，选用LED光源和畸变小的镜头作为视觉检测系统的照明光源和成像镜头，为精密测量提供了高质量的图像。
The LED light source and lenses with little distortion are selected as light sources and lens of imaging for inspection system, which provide high quality images during precise inspection.
给出了用视觉检测系统和三坐标测量机测量的刃沟横截面参数比对结果，说明本测量系统具有很高的测量精度，能够满足生产实践的需要。
The measurement results are presented. It shows that the system has high measurement accuracy and is able to meet the needs of manufacturing field.
汽车的数控人工视觉系统，被人们叫做GOLD(一般障碍与车道检测器)对传感器的数据进行分析，进而自动调节汽车的速度和方向。
The vehicles' computerized artificial vision system, known as GOLD (Generic Obstacle and Lane Detector), analyzed the data from the sensors and automatically adjusted their speed and direction.
阐述了织物疵点自动检测工业视觉系统的软、硬件设计方案。
Software and hardware design of this fabric defects automatic detecting industrial vision system are expatiated.
提出了一种基于计算机视觉的公交系统人流量检测方法。
Pedestrian flow detection method in public transport system based on the computer vision is presented.
ECM电子器件识别系统就是计算机视觉检测技术的应用实例。
ECM electronic component recognition system is an example of Automated Visual Inspection technology.
机器视觉自动检测系统的稳定性将直接影响产品检测的质量。
The stability of an automated inspection system on machine vision will directly affect quality of product inspection.
针对目前VCM磁钢片轮廓尺寸的检测方法存在检测速度慢、精度低等问题，设计了基于机器视觉的VCM磁钢检测系统的总体结构。
The structure of inspection system on VCM based on machine vision is designed to meet the problems of dimensional inspection methods on VCM at present such as low speed, low grade precision and so on.
基于机器视觉的智能车辆导航是智能车辆系统的关键，包括道路检测和障碍物检测两部分。
Machine vision based intelligent vehicle navigation, including road detection and obstacle detection, is very important in the intelligent vehicle systems.
研制开发的烟标质量在线检测机器视觉系统，具有广阔的应用前景。
Eventually, the on-line Machine Vision System for Presswork Quality Inspection of gathering the Machine Vision's.
工业图像检测系统是机器视觉、数字图像处理及工业质量检测等多学科的交叉。
Industrial image detecting system is an integration of machine vision, digital image processing and industrial product detection.
工业图像检测系统是机器视觉、数字图像处理及工业质量检测等多学科的交叉。
Industrial image detecting system is an integration of machine vision, digital image processing and industrial product detection.
应用推荐