初步实现了装药结构的参数化分析。
The propellant grain structural parametric analysis is realized in primary level.
固体颗粒封孔的装药结构频繁发生炮孔堵塞。
The hole remained may be blocked up frequently after blasting if the solid granular material was used for stemming.
阐述高台阶爆破的合理装药结构，以及扩孔爆破问题。
The reasonable loading structure and reaming blasting are expou…
通过点火机构及装药结构的改进，压力波现象有明显改善。
Through an improvement of ignition elements and charge configurations, the pressure wave phenomenon was seen to have been improved considerably.
实验结果为多级串联战斗部次级装药结构选择提供了依据。
The results could do help in designing the second parts of the Tandem warhead systems.
具有分段装药结构炮孔的缓冲孔爆破是边坡控制爆破方法之一。
Cushion blasting with divided charge holes is one of the controlled blasting techniques near slopes.
本文分析了露天矿深孔爆破长期沿用的连续装药结构存在的问题。
This paper analyses problems concerning the conventional continuous loading structure in open mining deep borehole blasting.
以空气垫层和水垫层为例介绍软垫层光面爆破装药结构爆破机理。
The blasting mechanism of smooth blasting soft mat layer charging construction (for example, air layer and layer) is introduced.
论述了新的装药结构-底部空气垫层装药结构的特点和爆破原理。
A new loading structure-bottom air cushion loading is described together with its specialities and blasting principle.
埋头无壳弹的点火、烧与装药结构的相互匹配有着十分密切关系。
In the countersunk caseless cartridge, the burning at ignition allied to the matching of charge configuration.
探讨了对于特定的装药结构如何达到弹道性能一致性的技术途径。
Finally, the technical measures to realize the consistency of interior ballistics performance were discussed.
该文根据开槽管状药的装药结构特点，建立两相流内弹道理论模型。
According to the characteristics of charge structure with slotted stick-propellant bundles, two-phase flow interior ballistic models are established in this paper.
介绍了一种岩石爆破定向破裂装药结构的破岩原理、制作方法及试验效果。
The splitting Mechanism, charge preparation and testing result of the loaded constitution of directional splitting in rock blasting are introduced.
该文的结果对固体火箭发动机装药结构完整性分析计算有重要的实用价值。
The results of this paper are of practical significance to grain structural integrity analysis and computation of solid rocket engines.
针对硅系延期药采用直填直压式和延期索式两种装药结构进行了实验研究。
The filling structure of silicon delay composition was studied by two ways: filling and pressure pressing in directly and the delay cord.
该文根据一种新型点火系统的装药结构特点，建立两相流内弹道数理模型。
In this paper, two-phase flow interior ballistic models are set up on the basis of the charge characteristics with a new type of ignition system.
该技术和结果对装药结构完整性分析及推进剂储存寿命的研究有重要意义。
The paper will be useful to structural integrity analysis of grains and to a study of the service life of solid propellants.
在分析炸药冲击起爆理论的基础上，设计了环形和环锥形传爆药柱装药结构。
Based on an analysis of the shock initiation theory of explosives, the annular structure booster pellet and the annular conical structure booster pellet were designed.
本文介绍了爆破方案的设计、爆破参数的选取、装药结构以及岩体中声波的测定。
In this paper, the design of blasting scheme, the selection of blasting parameters, charging structure and sound wave measurement in a rock mass were introduced.
通过改进爆破的孔网参数、装药量与装药结构、起爆顺序等，从而形成了光面爆破。
By improving parameters of the blasting hole, the charge, charging structure and the priming order etc, the smooth blasting is formed.
讨论了线形聚能装药的参数、设置方法以及深孔爆破的布孔参数、装药结构、起爆方法。
The parameters and layout of linear shaped charge, and the hole-pattern parameters, charging structure and priming method for long-hole blasting were discussed.
实践证明，采用减小炮孔参数，改变装药结构，变化起爆顺序等方法，均可提高爆破效果；
Practice shows that adopting methods such as decreasing boring parameter, changing structure of explosive setting and sequence of initiation, etc. can improve blasting effect;
本文介绍了标准抛放弹的装药结构，标准抛放弹用发射药的类型、药型、装药量及装填密度。
This paper describes the charge configuration of a typical cartridge, and the type, shape, charge weight and charge density of the propellant with which a typical cartridge is charged.
试验结果表明FAE装药结构可行，满足设计要求，为高威力FAE战斗部设计提供了依据。
The results show that the structure design is reasonable and meet the requirements of FAE. The research provides a reliable basis for the design of high power FAE warhead.
本文介绍了爆破方案，包括药室布置、爆破参数选择、药量及装药结构、起爆网路等有关技术。
In this paper, the blasting design was introduced, including the layout of charged Chambers, the selection of blasting parameters, charge weight, charging structure and priming network.
为了提高传爆药柱起爆钝感弹药的能力，根据冲击波汇聚技术原理设计了环形传爆药装药结构。
In order to improve the ability of booster pellet to initiate the insensitive ammunition, the annular booster pellet is designed based on the technique of shock wave focusing.
鉴于以上结论，进一步分析了上部空气层装药结构轴向不耦合系数与起爆方式对爆破效果的影响。
Based on these conclusions, the influence of axial decoupling coefficient of top-air-decked charge structure and detonating manner on blasting effect is analyzed here.
鉴于以上结论，进一步分析了上部空气层装药结构轴向不耦合系数与起爆方式对爆破效果的影响。
Based on these conclusions, the influence of axial decoupling coefficient of top-air-decked charge structure and detonating manner on blasting effect is analyzed here.
应用推荐