车床主轴变速、装夹工件、测量工件、清除切屑或离开车床等都必须停车。
Be sure to stop the lathe while shifting main - shaft speed, clamping work - piece, measuring work - piece, cleaning out scraps or leaving lathe.
用夹具装夹工件进行机械加工时，由于诸多原因，会使工件产生加工误差。
While holding component parts by fixtures the machining errors will be engendered on workpieces owing to a lot of reasons.
数控车削加工与普通车床加工大致相同，但刀具的选择、切削用量的选择以及工件的装夹等工艺问题也有各自的特点。
CNC Turning Lathe Machining with roughly the same, but the tool of choice, the choice of cutting parameters and workpiece clamping and other technology issues also have their own characteristics.
文章分析了超声振动车削时工件的装夹偏心和车床主轴的旋转精度对加工表面粗糙度的影响。
This paper analyses the influence of the eccentric clamp of the workpiece and the rotative accuracy of the lathe spindle on the ultrasonic lathe.
大轴类工件精加工时，在机床精度满足要求的情况下，解决工件装夹方法的选用是十分关键的问题。
It is the key to select the method of assembling and fixing the work-piece when large axle work-piece is to be finely processed and the precision requirement of lathe is met.
文章针对具有代表性结构的液压挺杆类零件，提出了采用弹性卡盘结构来解决工件装夹问题。
This article proposed a solution to this problem with spring chuck that focused on the holding typical parts such as hydraulic tappets.
普通车床卡盘扳手完成工件装夹后，有可能未取出扳手就启动电源，容易造成生产安全事故。
After plain lathe completes its work holder, if the chuck wrench isn't drawn out because of various reasons, personal or equipment accidents will happen.
提出了大型机加工件的装夹及定位设计方案。
The design scheme of clamping and locating in machining large-sized workpieces is put forward.
加工中心备有刀库，具有自动换刀功能，是对工件一次装夹后进行多工序加工的数控机床。
Processing center for tool store, have automatically change the tools function, the workpiece is a fixture on the processing process to the numerical control machine.
为了揭示装夹方案对残余应力的影响，利用有限元技术模拟了工件加工过程中不同的装夹方案，并分析了模拟结果。
To reflect the relationship between clamps and residual stress, finite element models with different clamping schemes were built and the clamping process was simulated.
待镀工件与装夹密封装置一起组成了一个顶部开口的容器，在施镀过程中，工件为阴极，镀笔为阳极。
The workpiece to be plated and the clamping sealing device together form a container having an opening at the top; in plating process, the workpiece is the cathode, and the plating pen is the anode.
工件零点是工件坐标系的原点，在数控镗铣加工中心上，一次装夹需要设置多个工件零点。
The workpiece zero is the origin of the workpiece coordinate system. When workpiece were set up on NC machine center, normally we need define more than one workpiece zero.
工件零点是工件坐标系的原点，在加工中心上一次装夹需要设置多个工件零点。
The workpiece zero is the origin of the workpiece coordinate system. When the workpiece was set up on machining center, normally we need to define more than one workpiece zero.
该装置包括待镀工件、工件装夹密封装置、内孔刷镀专用镀笔、镀笔转动装置。
The device comprises a workpiece to be plated, a workpiece clamping sealing device, a plating pen special for inner bore brush plating, and a plating pen rotary actuator.
在有些数控机床上，甚至工件 装 夹的过程都是自动化的。
With some CNC machines, even the workpiece loading process has been automated.
将工件视为弹性体，运用有限元分析软件ANSYS，对采用台钳直接装夹和工装装夹中零件产生的变形进行模拟。
The workpiece was considered as elastomer, and was deformation when clamped both by bench clamp and fixture was simulated with ANSYS.
所配套的工件自动传输机构、自动工件装夹定位机构及工件自动翻转机构，稳定可靠，最大限度地满足了端墙焊接生产的技术要求。
The auto-transmit mechanism, auto-air jig, positioner of the produce line could work stably. The product line satisfied the welding technical requirement of manufac…
所配套的工件自动传输机构、自动工件装夹定位机构及工件自动翻转机构，稳定可靠，最大限度地满足了端墙焊接生产的技术要求。
The auto-transmit mechanism, auto-air jig, positioner of the produce line could work stably. The product line satisfied the welding technical requirement of manufac…
应用推荐