介绍了应用该项技术的优越性，主要有包衬寿命翻番及钢的脱硫率显著提高等。
The advantages of this technology are introduced, which mean the double life of ladle and improvment of rate of desulfurization in steel.
准备碳钢、不锈钢、特材、衬四氟的焊接工艺文件，并和相关部门做技术交流。
Prepare for WPS for CS, Low-alloy Steel, SS, Special Metal and FPE products and communicate with related department for technical communication.
钢衬塑运输槽罐的钢体部分的制作，按照JB/T4735-1997《钢制焊接常压容器》标准。
Transport steel tanks lined with plastic body parts of the steel production, in accordance with the JB/T4735-1997 "welded steel pressure vessel" standard.
影响球磨机经济运行的因素较多，首先是钢球和衬板由于选材和匹配不当，磨损严重、消耗量大。
The factors which influence the ball mill operating economically is more. First, the wear consumption of steel sphere and backing sheet is serious.
混凝土坝下游面钢衬钢筋混凝土管道既是一种新型的布置方式，又是一种新型的结构形式。
The Penstock laid on downstream face of dam is not only a new type of arrangement, but also a new kind of structure.
介绍了钢衬聚四氟乙烯设备的加工方法，设计中需要注意的问题，以及在湿氟、湿氯环境下的使用情况。
Manufacture methods, some attentive questions during design and use conditions of the multiplex equipment of carbon steel with PTFE liner are introduced.
应用电子衍衬技术和扫描电镜等手段，对共析珠光体轨钢的微观结构和断裂过程，进行了观察和分析。
The microstructure and fracture process of an eutectoid pearlitic steel have been observation and analysed by means of electron-diffraction-contrast technique and SEM.
介绍了涟钢烧结厂为提高设备作业率和圆筒混合机的混匀效率，对圆筒混合机衬板材质和结构进行的改造。
The modification of drum mixer liner material and structure conducted in LIANGANG sintering plant for increasing equipment work rate and mixing efficiency was presented in this paper.
介绍了脱包隔热衬板及喷补内衬工艺在长钢的应用。
Introduces the application of removable insulating plate and gunned lining in Chang-gang.
结果表明：铜在不锈钢衬筒中的扩散深度随着停留时间和加热温度的增加而增加；
The heating temperature and holding time had distinct effects on the copper diffusion depth in the stainless steel socket.
含锰11- 14%的钢有极高的耐磨性，用于挖土机铲斗，球磨机衬板等。
Wear resistance high manganese steel 11-14%, for the excavator bucket, ball mill liner.
是替代不锈钢、衬胶、镀锌管材的首选产品。
Are alternatives to stainless steel, rubber lining, galvanized pipe product of choice.
材质：与物料接触部位的材料可根据用户需要，分为碳钢、不锈钢、钛材、衬橡胶、衬塑料、衬四氟等。
Material: material contact with the material parts can be based on user needs, are divided into carbon steel, stainless steel, titanium, rubber lining, plastic lining, PTFE lining and so on.
并可根据用户的要求制造，材质为碳钢衬胶和不锈钢二种。
According to the user's requirements and manufacturing, made of carbon steel and stainless steel Chenjiao two kinds.
分仓后的球磨机设备经过试验，可以在球磨机设备耗材，如钢球和衬板的消耗上起到一定的遏制作用。
Points of ball mill equipment open test, can be in technological equipment, such as steel ball mill and lining board cost containment plays a certain role.
埋藏式压力钢管设计中，钢衬、混凝土衬圈和围岩之间普遍存在着不连续的缝隙，致使设计计算时难以进行联合受力分析。
It is difficult to analyze combined work of underground penstock due to the gap among steel lining, concrete lining and rock.
为保证钢衬整体结构的稳定性，通常都对脱空进行接触灌浆，一般以水泥灌浆为主，化学灌浆则用于水泥灌浆后的辅助补强。
To ensure stability of the whole structure of steel-lined, grouting is always applied into void treatment in which chemical grouting was supplementary for cement grouting.
因此研究泄水孔流道有无钢衬以及不同钢衬厚度对孔口应力的影响很有必要。
Therefore, the study of scupper flow channel whether steel liner as well as different steel liner thickness on the impact of orifice stress is necessary.
材质：与物料接触部位的材料可分为不锈钢、钛材、碳钢、衬橡胶、衬塑料、衬四氟等。
Material: the material of the section touching the separated materials can have kinds of stainless steel, titanium steel, carbon steel, line with rubber, line with plastic and others.
泄水孔有无钢衬以及钢衬厚度的改变基本不影响上下游悬臂结构的应力状态。
Scuppers whether changing the thickness of steel liner or lining the steel liner or not does not affect the basic structure of upper and lower cantilever stress state.
生产电站锅炉喷燃器火嘴、中心筒、风帽、煤粉管、灰渣管、衬板等400多个规格型号的耐热、耐磨、耐腐蚀特种钢铸件。
The main products are all kinds of heat-resisting, abrasion-resisting and corrosion-resisting special steel and boiler mouth, coal-dust tube and so on, about 400 specifications.
研究结果表明：管道内钢衬的厚度对管道的环向动应力集中峰值有很显著的影响，钢衬越薄，动应力集中程度越高；
Analytical results show that steel-line thickness has a significant effect on peak dynamic stress concentration of the pipe, The thinner steel liner, a higher level of dynamic stress concentration;
研究结果表明：管道内钢衬的厚度对管道的环向动应力集中峰值有很显著的影响，钢衬越薄，动应力集中程度越高；
Analytical results show that steel-line thickness has a significant effect on peak dynamic stress concentration of the pipe, The thinner steel liner, a higher level of dynamic stress concentration;
应用推荐