提出了表征路面表面空间几何特征的整体特征参数和局部特征参数。
The whole feature parameters and local feature of spacial geometric features of road surface are put forward.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
这套基于SPR技术的系统，可以原位、实时、非标记的表征蛋白质在生物材料表面的动态吸附行为。
This system which base on SPR technology can monitor the kinetic behavior of the protein adsorption onto the biomaterial surfaces in situ, in real-time and without labelling.
切削力、磨削力和磨削表面粗糙度是表征切削加工和磨削加工的最重要特征量，对它们进行预测分析和过程控制具有十分重要的意义。
Cutting force, grinding force and surface roughness of grinding are the most important parameters to scale machine progress, thus precision methods for them is needed in engineering.
机械加工表面形貌表征和评价一直都是表面计量学和摩擦学领域最重要的课题之一。
Characterization and evaluation of machined surface topography has always being one of the most vital and appealing issues in the area of surface metrology and tribology.
介绍了纳米粒子制备过程中的分散、表面双电层理论、干燥方法、表面修饰与表征方法。
The dispersion, double electrical layers theory, drying methods, surface modification and characterization methods in preparing process of nanometer particles were introduced in this article.
本文最后分析了表面形貌的表征问题。
Finally, the problem of characterization of surface topography is analysed.
对国内外表面形貌测量仪器、表征方法研究情况进行了阐述，并指出了其发展趋势。
The research status of surface topography measurement apparatus and characterization methods were introduced, and the development tendency of them was pointed out.
基于磨损表面的分形表征、经典接触理论和磨损理论，建立了磨合磨损预测分形模型。
Based on the fractal characterization of worn surfaces, classical contact mechanics, and wear theory, a fractal model for predicting wear during the running in process was developed.
通过理论计算及实验验证，得出了圆柱滚子外表面的分维表征。
The fractal dimension characteristic of the roller surface was obtained through the theories calculation and the experiment verification.
实验结果表明，分形维数能很好地表征表面轮廓，可为进一步的接触分析提供更合理的几何模型。
Taking rigid disk surface as an example, fractal parameters are obtained by means of power spectrum and structure function, providing a proper geometric model for further contact analysis.
随氧分压增加，（002）衍射峰的角度变大，表征薄膜表面粗糙程度的方均根粗糙度减小。
With the increasing of oxygen partial pressure, angle of (002) diffraction peak becomes larger and surface RMS of the films reduces.
对试样进行了硬度、拉伸强度、断裂伸长率、热老化等性能试验；对老化后的试样表面进行了SEM表征。
Hardness, tensile strength, breaking elongation ratio and aging property of samples were tested and surface of sample after aging was represented by SEM.
钛植入体的生物学性能取决于其表面氧化膜的表征。
The Biological properties of titanium implant depend on its surface oxide film.
镀金触点表面的微孔率是表征镀层质量的重要指标，它表明了镀层对基体防护作用的优劣程度。
Microporosity of the surface of Gold Plated Contacts which indicates the protection performance of plating layers to matrix is an important index for quality of plating surface features.
用硬脂酸在行星磨中对钢渣进行表面改性研究，并用平均粒径和活化指数作为表征参数。
In this article stearic acid was used to modify steel slag in the planetary mill with average particle size and activation index as token parameters.
简要总结光电子显微术在表面结构分析，表面化学，磁学，以及半导体器件表征等方面的应用。
We briefly summarize the applications of PEEM to areas such as surface structure analysis, surface chemistry, magnetism, and semiconductor device characterization.
本文还探讨了FPCPU的合成工艺、结构表征，以及接枝前后纤维表面的形貌特征变化。
The synthetic conditions, structural characterizations and the morphology changes of the fiber before and after grafting of the above FPCPU have been investigated.
运用红外表征手段对活性抑制后的催化剂表面进行研究，发现有微量的硫酸盐生成。
IR characterization showed that there was traced sulfate formed on surface of the catalyst after its activity was inhibited.
接触角是最方便、应用最广泛的表征固体表面的标准方法之一。
Contact Angle is one of the handiest and most widely used methods, which are used to identify solid surface.
辐照改性层特性的超声无损表征为材料表面改性层质量评价提供了很好的途径。
The ultrasonic nondestructive characterization for irradiated coatings has contributed to the quality evaluation of modification layers of surface materials.
采用扫描电子显微镜和透射电子显微镜对样品的表面形貌进行表征。
The samples were characterized by scanning electron microscope and transmission electron microscope.
实验样品采用X射线衍射分析、比表面和孔径分析及热分析三种表征手段进行表征。
Three characterization methods of the lab samples were as followings: X-ray analysis, specific surface area and pore analysis, and thermal analysis.
提出了织物表面温度变化率作为表征非织造布的热湿舒适性能的评价指标。
A new index named as fabric surface temperature changing rate was proposed to indicate heat and moisture performance of nonwovens used in medical protective clothing.
对采自神华集团选煤厂的两个煤尘进行了性质表征，并基于其表面性质特点开发出了几种抑尘剂。
Characterization is made of two coal dust samples and several types of coal dust restrainer have been developed based on surface behavior of dust particle.
通过XRD及BET表面积测定表征催化剂。
矿物及其材料的表面活性是其表面反应性的具体表征，它是由矿物表面功能基所控制。
The surface activity of minerals and materials is a characteristic parameter of their surface reactivity, which is controlled by the functional groups on mineral surfaces.
矿物及其材料的表面活性是其表面反应性的具体表征，它是由矿物表面功能基所控制。
The surface activity of minerals and materials is a characteristic parameter of their surface reactivity, which is controlled by the functional groups on mineral surfaces.
应用推荐