对镁合金表面着色技术进行了综述。
Coloring technologies for magnesium alloy surface were reviewed.
铸造陶瓷的表面着色是一个依赖技术的过程。
The surface staining of cas-table ceramic restorations is a technique-dependent process.
对于这种表面着色的特殊要求,一般染色工艺是达不到的。
With this special requirement of surface colouration, general dyeing process is not available.
以铬酐-硫酸体系为主着色液加入适量添加剂,对不锈钢试样进行表面着色。
A study of surface coloring on stainless steel products was carried out with chrome oxide-sulfuric acid system as main coloring solution and adding suitable additive.
表面预处理的主要内容及着色反应的化学机理。并对目前众多的人工表面着色配方进行了归纳。
This paper also sums up many useful prescription of artificial surface coloration and presents the chemical mechanism of coloration reactions.
研究铜及其合金的表面着色过程的规律和基本原理,对铜及其合金表面着色的化学反应机理也进行了相应的探讨。
Procedure rules and fundamental principle of surface colouring of Cu and Cu alloy are investigated. Chemical reactive mechanism of surface colouring of Cu and Cu alloy is probed also.
这种织物表面覆有一层抗着色污染的纳米粒子。
The fabrics are coated with nano-sized particles that repel stains.
以下图片是用扫描电子显微镜,利用电子光束跟踪物体表面制作而成。由此拍摄出的黑白图像经着色后反映出虫卵的自然外观。
The images were made with a scanning electron microscope, which uses beams of electrons to trace the surfaces of objects.
异或的效果虽然不是如 图1 所示的结果,但它确实表明了composite是如何负责在图标的绘图表面上进行着色的。
The XOR effect is not the result shown in Figure 1, but it does show how the composite is responsible for rendering the icon onto the drawing surface.
从工艺流程、配方、质量影响因素等方面,介绍一种在铜及其合金表面着自然铜绿的化学着色新工艺。
This paper introduces a new chemical colouring technology for copper and its alloy surface to colour a Verde green with respect to technical process, prescription, quality control and so forth.
“黑色的MDF在材料上着色,与易腐烂的和涂期的木材相比,MDF材料表面不易剥落,因此也可用作台阶”,f+f建筑师说。
"The same black MDF material, being dyed in the mass and less prone to surface chipping compared to tainted or lacquered wood, is also used for the stairs, " said f+f architectes.
如果多边形的数据显示在这锯齿状的方式,条纹着色模式,它标志着大量的小违规行为的皮肤,即使主要的流动,表面上可以很好的。
If the polygon data are displayed in this jagged way in stripe shader mode, it indicates lots of little irregularities of the skin even though the main flow of the surface can be good.
铝及其合金电解着色技术是铝表面防护-装饰性处理的一种重要途径。
The aluminum and its alloy electrolysis coloration are important method to the aluminum surface protection and cosmetic processing.
在遮阳的地方,表面砌砖结合涂油硬木、保护钢和氧化着色混凝土。
Face brickwork is paired with oiled hardwood in sheltered locations, protected steel and oxide-tinted concrete.
氧化膜表面具有轻微的渗透性,因此可以用有机或无机染料着色。
The slightly porous nature of the surface of the oxide film allows it to be colored with either organic or inorganic dyes.
在被着色表面上的每一个点上,采样信息节点决定这个点的分形比率。
As each point on the surface is being shaded the Sampler Info node determines the Facing Ratio value for that point.
综述了木家具表面涂饰的施工工艺,包括选材、面特征和缺陷分析、前处理及着色等。
This paper reviews application process for surface decoration of wood furniture, including selection material, surface characteristic, defect analysis, pre-surface preparation and coloring etc.
介绍了该永磁球形步进电机定子、转子的结构,电机转子表面的着色原理以及电机定子上的光电传感器的放置;
The surface painting of rotor and the place of optoelectronic sensors, and then a weighted graph is given according to the structural characteristics and kinetics characteristics of the stepper.
采用化学着色法在不锈钢表面获得蓝色和金黄色化学转化膜。
The blue and yellow stainless steel colored film are obtained by chemical coloring.
对该玻璃表面黑化,采用了离子交换氢还原法、玻璃中掺杂着色离子法、表面涂覆法以及溶胶凝胶法。
The glass surface is blackened by use of ion exchange hydrogen reduction method, doping coloration ion method, surface coating method and collosol-gelling method.
着色检查:使用蓝色染料涂在模具,量规或者产品表面以检查平面、圆面或者锥面的工序。
BLUING / BLUE UP : Process of using blue dye to coat a surface of a master, gauge, or piece of product to check a flat, circular, or tapered surface.
通过咔唑紫的晶型转变、表面处理,获得性能稳定、着色力强、色泽鲜艳的产品,具有较大发展前途。
The bright coloured product with good tinctorial power and stability was obtained by the crystal transition and surface treatment to carbazole violet, which is prospect.
清洗表面——清洁的表面将使涂料的附着力最大化,并将着色剂渗出的可能性降到最低。
Cleaning the surface - clean surface will maximize paint adhesion, and coloring agents to minimize the possibility of leakage.
氧化膜厚度是影响铝材表面封孔和着色均一性的主要因素。
The thickness of oxidized film is a principal factor which influences the pore-sealing and dyeing uniformity of aluminium products' surface.
键槽轮毂的锥孔应至少有70%的着色(表面接触)转移到锥度计上?
Tapered bores for keyed hubs shall have a minimum of 70% transfer of bluing (surface contact) to the taper gage.
综述了木家具表面涂饰的施工工艺,包括选材、表面特征和缺陷分析、涂前处理及着色等。
This paper reviews application process for surface decoration of wood furniture, including selection material, surface characteristic, defect analysis, pre-surface preparation and coloring etc.
综述了木家具表面涂饰的施工工艺,包括选材、表面特征和缺陷分析、涂前处理及着色等。
This paper reviews application process for surface decoration of wood furniture, including selection material, surface characteristic, defect analysis, pre-surface preparation and coloring etc.
应用推荐