无机涂层有电镀、转化层、热喷涂、热浸渍、熔炉熔融、或在材料表面涂上薄膜、玻璃、陶瓷。
The inorganic coatings perform electroplatings, conversion coatings, thermal sprayings, hot dippings, furnace fusings, or coat thin films, glass, ceramics on the surfaces of the materials.
防腐蚀的油脂作用于金属表面的保护，适用于涂抹，浸渍和喷洒。
Anticorrosion greases serve for surface protection of metals and are applied by spreading, dipping or spraying.
利用浸渍法在2024铝合金表面上获得了金黄色的稀土转化膜，确定了成膜的最佳工艺条件。
A golden conversion film was obtained on the surface of aluminum alloy 2024 by immersion process. The suitable conditions of technology were established.
利用浸渍法在LY 12铝合金表面获得了金黄色的铈转化膜，确定了常温稀土(铈)化学转化膜成膜工艺。
A golden yellow coating was obtained by immersion process on LY12 aluminum alloy surface. The process of cerium conversion coating at normal temperature was developed.
可直接对从橡胶制品中剥离出的增强纤维进行分析，也适用于表面有残留橡胶及其浸渍物质、难以分离完全以及仅有少量试样的橡胶制品中的增强纤维的剖析。
It was also suitable for the determination of the samples which contained residual rubber and its impregnated materials on the surface of fiber, which were difficult to be separated completely.
盐水浸渍法试验结果证明了成膜后LY12铝合金表面的腐蚀速率明显降低；
The data of salt solution immersion test indicate that corrosion rate of aluminium alloy LY12 with ceria thin film is decreased.
对用化学方法制备的天然胶乳浸渍制品表面起皱进行了研究。
The wrinkling on surface of nature latex dipped products by chemical treatment was studied.
涂蜡和浸渍蜡于波纹纸板表面上的试验05。
Corrugated Board Facing, Test for Applied Coating Wax and Impregnating Wax in 05.
运用浸渍法、溶胶凝胶法和表面包覆法制备了多种的备选固体催化剂。
For the synthesis of MEC, the novel heterogeneous catalysts have been prepared by dipping, sol-gel and surface-coating technique.
让纳米级图案缩进高科技表面经过特殊浸渍铝合金表面。
Makes nano-tech level patterned indented surface after special dipping on aluminum alloy surface.
研究了气相氧化、氢氧化钾浸渍对IER炭化行为及SAC的结构、表面官能团及其吸附性能的影响。
The effects of oxidation and KOH impregnation on the carbonization behaviors of IER as well as on the structure, surface functional groups and adsorptive property of the resultant SAC were studied.
将杀虫涂抹剂用涂抹（或浸渍）的方法，施布于卫生害虫栖息处物体表面上，达到触杀、胃毒、拒避卫生害虫的目的。
The coating insecticide is applied by coating (or soaking) on the surface of substance where the destructive insects are stayed. Thus the aim of killing of destructive insects is achieved.
涂漆：用喷涂、刷涂或浸渍的方法获得保护层。表面不做任何处理。
Painting: using spray painting, brush or dipped method gain the protection layer. Surface is untreated.
研究表明，采用前期浸渍方法制备活性炭时，原料表面的氢基团被钠置换，形成交联体，从而可获得较高的活性炭收率。
It was found that pre-impregnation of raw palm shell was involved in replacement of some hydrogen ions with sodium ions to form cross-linded complexes, resulting in a relatively high yield.
用溶胶-凝胶法和浸渍-提拉法工艺，在玻璃表面上制备了均匀、透明的钇离子(Y3 +)掺杂二氧化钛纳米薄膜。
Homogeneous and transparent thin nanostructured titania films doped by Y3 + were prepared on glass substrates by sol gel processing and dip coating technique.
采用向炭素材料中浸渍这种浸渍型碳素材料的抗氧化剂的方法，在炭素材料的表面和炭素材料空隙的内表面形成抗氧化薄膜。
By means of soaking carbon material inside the antioxidant material, antioxidant film may be formed on the surface and inside the gap of the carbon material.
经特殊工艺生产的活性炭，保证了炭表面上含有官能团的种类与数量，利于化学物质的浸渍。
Produced by special activated carbon, to ensure that the carbon surface functional groups containing the type and quantity of chemicals in favor of the impregnation.
一种为飞行器(10)形成外部表面防护结构(12)的方法，包括将具有载体(51)的受载表面料(52)结合到混合预浸渍基材(32)。
A method of forming an exterior surface protective structure (12) for an aircraft (10) includes uniting a loaded surfacer (52) having a carrier (51) to a hybrid prepreg substrate (32).
镍镀槽处理使得执行机构的内外表面都能够完全浸渍。
The nickel bath process makes it possible to impregnate all internal and external surfaces of the actuator.
所述带有载体（51）的受载表面料（52）交界 粘结到所述预浸渍基材。
The loaded surfacer (52) with the carrier (51) is interfacially adhered to the prepreg substrate.
极间介质为易于浸渍的表面粗化聚丙薄膜，特别提高了大容量电容器的可靠性。
The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.
极间介质为易于浸渍的表面粗化聚丙薄膜，特别提高了大容量电容器的可靠性。
The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.
应用推荐