该阳 离子性表面施胶剂被涂敷于纸上。
主要应用于造纸行业中用作表面施胶剂等。
本品也用于表面施胶。
氧化淀粉用作纸张的表面施胶剂可提高纸的表面强度。
Oxidized starch used in surface sizing can increase the surface strength of paper.
介绍改性akd中性施胶剂在表面施胶中的使用效果。
Modified AKD sizing agent in the surface sizing is introduced.
本厂于1999年建办，主要生产造纸用浆内和表面施胶剂。
Our factory founded in 1999, we are specialized in size and surface sizing agent.
研究了不同浓度的壳聚糖-醋酸溶液表面施胶对纸的技术性能的影响。
The infection of different concentration chitosan- acetic acid solution surface sizing to the technical feature of paper was studied.
通过分子设计采用分段聚合方法制备聚合物表面施胶剂DP2000。
DP2000is a copolymer emulsion for surface sizing which produced by polymerization used to size many different types of paper, including offset paper, writing paper and coated board.
企业简介本厂于1999年建办，主要生产造纸用浆内和表面施胶剂。
Our factory founded in 1999, we are specialized in size and surface sizing agent.
浆内添加时有较好的增强、助留效果，用于表面施胶可明显提高纸张表面强度。
CMS has significant effect on strength and retention when it is used in the pulp; paper surface strength can be improved greatly when it is used as surface treatment size.
介绍了改性烷基烯酮二聚体（AKD） 中性施胶剂在表面施胶中的使用效果。
The performance of modified AKD sizing agent in surface sizing of offset paper was introduced.
该产品可以与各类表面施胶剂配用进行表面施胶，适用于文化用纸、纸板和高瓦纸等。
It can be used together with other surface sizing aids. It applies to fine paper, paperboard and high-strength corrugated etc.
造纸施胶剂是一种十分重要的造纸助剂，可主要分为浆内施胶剂与表面施胶剂两大类。
As an important group of paper chemicals, internal sizing agents can mainly be divided into two dispensable groups comprising acidic sizing agents and neutral-to-alkaline sizing agents.
对用原淀粉复合脂肪酸、原淀粉包埋沉淀碳酸钙(PCC)作为纸张表面施胶剂进行了研究。
Surface sizing using raw starch with fatty acid and raw starch coated PCC was studied.
综述了表面活性剂在制浆造纸、造纸湿部、表面施胶、涂布以及废水处理等方面的作用与应用。
In this paper the application of pulping, wet-end, surface sizing, coating process, and waste-water disposal are reviewed.
制备出几种淀粉衍生物表面施胶液，并对比了施胶后瓦楞纸的环压强度以及耐折度这两项指标。
Several starch derivatives was prepared as surface sizing agent, and then compared two indicators including ring crush strength and folding endurance.
介绍了表面活性剂在制浆、废纸脱墨、造纸湿部、表面施胶与涂布以及污水处理等方面的应用与作用。
This paper introduces the use and the action of Surface active agents in pulp, deinking, wet end, sizing, coating and polutional treatment.
介绍一种用于造纸的新型淀粉衍生物———羧甲基淀粉(CMS)，进行了浆内添加和表面施胶的试验。
A novel starch derivative, carboxymethyl starch (CMS) is introduced in this paper. Experimental results of CMS application both internal and surface treatment are presented.
结果表明，CMC是一种高效的表面施胶剂。生产实际中采用氧化淀粉和CMC按2∶1比例的混合物为好。
The results show that the CMC is a high effective surface sizing agent and the mixer of oxidized starch and carboxymethylcellulose in mixed proportion of 2to 1is better in practice.
将变性淀粉与合成聚合物表面施胶剂复配进行纸张的表面施胶是目前生产多用途办公纸最经济有效的方法之一。
Nowadays one of the most economical and effective methods to produce multi-use office paper is surface sizing with combining modified starch and synthetic polymeric agents.
介绍了表面施胶剂在无碳复写纸中的应用实验，结果表明添加表面施胶剂进行表面施胶能较大程度的提高纸的抗水性能，并可减少浆内施胶剂的用量。
The results proved that the use of the AGP as a surface sizing agent can improve the water-resistance of the paper and reduce the use of the internal sizing agent.
介绍了表面施胶剂在无碳复写纸中的应用实验，结果表明添加表面施胶剂进行表面施胶能较大程度的提高纸的抗水性能，并可减少浆内施胶剂的用量。
The results indicated that the use of surface sizing agent can improve the water-resistance of paper and reduce the addition level of internal sizing agent.
本文介绍了合成聚合物表面施胶剂AGP在胶版印刷纸和牛皮箱纸板生产中的应用试验，结果表明用AGP进行表面施胶能较大程度地提高纸的抗水性能，并可减少浆内施胶剂的用量。
The results proved that the use of the AGP as a surface sizing agent can improve the water-resistance of the paper and reduce the use of the internal sizing agent.
在造纸方面，壳聚糖可用做纸张增强剂、施胶剂、助留助滤剂、表面改性剂和造纸废液的絮凝剂。
In paper making chitosan can be used as fortifier sizing agent retention and filtration aid surface modifier and flocculation agent for paper-making effluent.
在造纸方面，壳聚糖可用做纸张增强剂、施胶剂、助留助滤剂、表面改性剂和造纸废液的絮凝剂。
In paper making, chitosan can be used as fortifier, sizing agent, retention and filtration aid, surface modifier and flocculation agent for paper-making effluent.
在中密度纤维板生产过程中采用管道与搅拌联合施胶新工艺，可以有效地解决产品表面存在的胶斑问题。
During the MDF production, adopting the new gluing technology of the combination of blow-line and agitation can effectively solve the problem of glue spots on the surface of board.
胶粒大小与组成、表面活性剂种类和胶体保护层类型等是影响中性松香造纸施胶剂稳定的主要因素。
The sizes and components of colloidal particles, kinds of surfactants, and types of colloidal protect layers are main factors to determine the stability of the neutral rosin sizing agents.
在中密度纤维板生产过程中，采用管道与搅拌联合施胶新工艺，可以有效地解决产品表面存在的胶斑问题。
During the MDF production, adopting the new gluing technology of combination of blow-line with agitation can effectively solve the problem of glue spots on the surface of board.
考察了变性淀粉的种类、纤维的表面电荷和微细纤维含量等对纸页抗张强度和施胶度的影响。
Effects of kinds of modified starches, surface charges and fine of a bagasse chemical pulp on tensile strength and sizing degrees of the paper made from the pulp were investigated.
考察了变性淀粉的种类、纤维的表面电荷和微细纤维含量等对纸页抗张强度和施胶度的影响。
Effects of kinds of modified starches, surface charges and fine of a bagasse chemical pulp on tensile strength and sizing degrees of the paper made from the pulp were investigated.
应用推荐