电晕或等离子体表面处理的改性聚合物表面放电。
Corona or Plasma surface Treatment is modification of polymer surfaces with electrical discharge.
介绍了多通道表面放电泵浦源的设计，并对相关的触发机理进行了理论分析。
The design of the pumping source with multichannel surface discharge is introduced, and the trigger principle is analyzed theoretically.
本文分析了以往的彩色三电极表面放电型彩色PD P中，寻址驱动电路的工作原理和不足之处。
In this paper, the principles of the conventional addressing drive circuits in the three-electrode surface-discharge PDP and its shortcomings are reviewed.
采用感光胶片作为阻挡介质的针-板放电系统，解析空气中固体电介质上纳秒正脉冲表面放电的形成过程。
To analyze the formation of surface discharge on a dielectric plate under positive nanosecond impulse voltage in air, a wire to plane electrode system with a barrier of negative film was used.
在一个实施例中，一种被用于缓解CF R P部件表面放电的方法包括：首先，应用绝缘底层涂料于金属部件。
In one embodiment, a method for mitigating electrical surface discharges from a CFRP component includes first applying an insulating primer to a metallic component.
通过电池暴露在空气中的表面所吸入的氧气在碳孔中进行反应为电池放电。
The oxygen, which will be drawn in through a surface of the battery exposed to air, reacts within the pores of the carbon to discharge the battery.
电荷存储元件——电容器，可以快速地充放电，但是因为电荷被存储在电容器金属片的表面，所以电荷容量有限。
Electrical storage devices known as capacitors charge and discharge very quickly, but because they hold their charge on the surface of metal plates, their storage capacity is limited.
目前最先进和成功的方法的电晕表面处理是基于原则的高电压放电在空气中。
The most advanced and successful methods of corona surface treatment are based on a principle of high voltage discharge in air.
基本的高电压放电和空气中的应用表面处理。
Basics of high voltage discharge in air and its application to surface treatment.
本文设计了一种实验方案，用高频表面波放电来激发等离子体，并分析了等离子体天线元的基本特性。
In this paper, we devise an experiment, using HF surface wave discharge to excite plasma, to analyze basic characteristics of plasma antenna elements.
电池反应所引起的负极金属表面阻抗的增加，是放电容量减小的主要原因。
The main cause of discharge capacity decrease was the impedance of metal surface increased due to cell reaction.
研制了一种新型的探测器，利用气体放电和外部电路猝灭的方法测定样品表面发射的低能光电子。
We have studied and constructed a new detector by gas discharge and external quenching circuits to measure the low energy photoelectron emitted form the specimen surface.
介质阻挡放电(DBD)处理聚合物表面可有效提高其亲水性和结合强度。
Dielectric barrier discharge (DBD) can be applied to modify polymer surface to improve its wettability and adhesive strength.
利用XPS、ATR-FTIR等手段来研究DMF预溶胀涤纶经电晕放电处理后的表面结构性能。
The surface structural properties of DMF pretreated PET fabric treated by corona discharge are studied through XPS, ATR - FTIR.
氧，(空气)通过电池表面的反应，暴露在空气中的毛孔内的碳，排放电池。
Oxygen drawn in through a surface of the battery exposed to air reacts within the pores of the carbon to discharge the battery.
同时必须保证ITO薄膜接地效果良好，否则会使OSR表面充放电现象更加严重。
The another is that ITO film must be well grounded, or else the surface charge and discharge phenomena of OSR would be much more serious.
介绍了辉光放电光谱技术的原理及与其它表面分析技术的比较。
The principle of glow discharge optical emission spectrometry was introduced in this paper, and was compared with other surface analysis techniques.
对电火花表面强化的火花放电原理提出了一定的看法。
Therein, a certain view point is proposed in the paper, about the spark discharging principle on electrosparking surface to be strengthened.
多弧离子镀技术是离子镀技术的一种改进方法，它是把弧光放电作为金属蒸发源的表面涂层技术。
Multi-Arc Ion plating technology is an improved method of Ion plating and it is a surface coating technology that uses arc as the fountain of vaporizing.
给出了上述放电电极的面型和表面电场分布，简述了制造上述电极的注意事项。
Profiles and electric-field distribution of these discharge electrodes are plotted and calculated, and their manufacturing notes are briefly described.
对于电极表面有缺陷的情况，只要选取适当的电极表面轮廓模型，其起始放电电压也是可计算的。
In the case of electrode surface imperfections, the discharge inception voltage can also be calculated provided a suitable electrode surface profile model is chosen.
并采用傅立叶变换红外光谱分析仪（FTIR）分析了局部放电引起的硅橡胶表面结构的变化。
And the change of silicone rubber surface structure by the Fourier Transform Infrared Spectroscopy (FTIR) is analyzed.
为了研究大气压空气等离子体对绝缘材料表面改性的影响，采用介质阻挡放电对聚苯乙烯进行了表面改性。
In order to study the effect of atmospheric pressure air plasma on insulating material surface modification, using dielectric barrier discharge to modify polystyrene surface.
文本研究了用电容耦合RF辉光放电和高压电晕放电产生的等离子体对聚丙烯材料表面改性。
The polypropylene surface modification is researched using plasma generated by capacitance-coupled RF glow discharge and by high voltage corona discharge.
脉冲放电止裂后，可对带有裂纹的表面进行强化处理。
The experiment shows that fusion welding reinforcement could proceed on the surface with crack of the die after crack arresting.
利用动态指纹提取方法观察到了手指在介质层表面产生的沿面放电现象。
The phenomenon of fingerprint discharge along the dielectric film surface is observed by dynamic method.
表面脉冲放电以电子崩过程发生，并在聚乙烯膜表面形成导电通道。
The pulse discharge took placed as an electron avalanche along the electric channels formed on the surface.
研究了稀土元素钇对锂铝合金阳极充放电性能及其表面结构的影响。
The effects of yttrium on the charge discharge behaviour and surface structure of lithium aluminium alloy anode were studied.
研究了稀土元素钇对锂铝合金阳极充放电性能及其表面结构的影响。
The effects of yttrium on the charge discharge behaviour and surface structure of lithium aluminium alloy anode were studied.
应用推荐