以上均说明此方法对纤维表面改性效果明显。
SEM images indicate that there are many small bright spots on fiber surface.
本文主要介绍改性石英填料的粘度、 浸润性能（渗透时间、浸润角、浸润点等）等指标，以及表面改性效果的评价方法。
In terms of viscosity, osmosis time, contact angle and oil absorption this paper evaluates the effect of surface modification of mineral filling.
研究了辉光放电产生的低温等离子体处理精干苎麻和选用酰胺类单体接枝对苎麻表面改性的机理及效果。
This paper studies the fine and dry ramie processed by glow-discharged plasma and takes acylmonomer grafting to test the mechanism of ramie surface modification and their effects.
最后讨论了聚合物材料的表面改性方法及效果。
At last, the method and effect of modification surface of polymeric material are discussed in this paper.
结果表明：用浓硝酸或混酸对碳纤维表面改性的效果是显著。
The result shows that, the concentrated nitric acid and mix acid have a obvious effect to the chemical modification of carbon fiber surface.
所选用的不同种类的不同处理量的偶联剂对无机抗菌粉体的表面改性均有一定效果。
Then, some exciting results were found as follow: Inorganic antibacterial powder, modified with different coupling agents, showed different effects on its dispersion.
分析比较了灯丝放电PIII和射频辉光放电PIII对基体表面进行氮离子注入后的改性效果。
Modification effect of hot filament gas discharge PIII was compared with that of radio-frequency (RF) glow discharge PIII.
叙述了电火花处理对高分子材料表面结构与性能，以及处理条件对改性效果的影响，电火花引发高分子材料表面接枝改性的新方法。
The effect of corona discharge treatment on the structure and properties of polymer materials as well as the surface graft modification by corona discharge were briefly introduced.
碳纤维和芳纶纤维表面冷等离子体改性的效果甚佳，抗拉强度得到显著的提高。
The effect of cold plasma modification on the surface of carbon fiber and aromatic polyamide fiber is very good and the tensile strength is notably increased after treated.
试验结果表明：CT- 136对煤矸石有良好的改性效果，改性剂与煤矸石矿粉表面发生了化学吸附。
The results of test show that CT-136 has good modified effect on coal gangue, and chemical adsorption form between medication and surface of coal gangue.
研究结果表明，低温等离子体表面改性处理能够刻蚀牦牛毛纤维表面的鳞片，而且空气等离子体的刻蚀效果优于氧等离子体的刻蚀效果；
The results reflect that treated by low temperature plasma processing the surface squama of yak hair is etched and the effect of air plasma is better than that of oxygen plasma.
介绍了改性烷基烯酮二聚体（AKD） 中性施胶剂在表面施胶中的使用效果。
The performance of modified AKD sizing agent in surface sizing of offset paper was introduced.
微生物在黄铁矿表面吸附量的大小，直接影响微生物对黄铁矿的表面改性，决定浮选脱硫效果的优劣。
The surface modification of pyrite is directly affected by the microorganism adsorption amount on coal-pyrite surface, which will determine the efficiency of floatation desulfurization.
表面改性过程中加入稀土元素对改善材料表面的摩擦学性能有显著的效果。
The effect is remarkable for improving the tribological properties of the materials' surface to add rare earth elements in the process of surface modification.
介绍改性akd中性施胶剂在表面施胶中的使用效果。
Modified AKD sizing agent in the surface sizing is introduced.
应用表面改性剂进行了氢氧化铝表面改性研究，采用了比表面积测定、红外光谱分析等测试方法对改性效果进行评价，确定了最佳改性条件。
The surface modification results were analysed by the methods of the specific surface area measurement and infra red absorption spectroscopy, and the best conditions for modification were obtained.
主要研究了氢氧化镁的湿法表面改性的工艺过程，用浊度分析方法对改性效果进行了比较，确定了最佳工艺条件。
The turbidimetry was used to evaluate the efficacy of surface modification, the optimal formation conditions of production were fixed.
利用甲醇等离子体对硅橡胶进行表面亲水改性，并利用光电子能谱和接触角测量研究了表面亲水改性效果和表面动力学性质。
In this paper, surface modification of silicone rubber by methanol plasma was studied by the aid of XPS and contact Angle technique.
目的：概述钛及其合金表面生物活性改性的方法及对于改性后效果评价的方法，为临床应用提供参考。
OBJECTIVE: to review the methods and efficacy of surface bioactivity modification for titanium and titanium alloy, and to provide references for further clinical application.
采用阴离子表面活性剂硬脂酸钠对水滑石进行表面改性，研究了温度、时间和改性剂用量等各种因素对水滑石改性效果的影响。
Hydrotalcite was surface modified by using sodium stearate. The factors of different treatment conditions such as temperature, time, amount of modifier, were analyzed.
采用阴离子表面活性剂硬脂酸钠对水滑石进行表面改性，研究了温度、时间和改性剂用量等各种因素对水滑石改性效果的影响。
Hydrotalcite was surface modified by using sodium stearate. The factors of different treatment conditions such as temperature, time, amount of modifier, were analyzed.
应用推荐