优选地，该粘合剂层在植针步骤期间被植入的纤维穿过，且产品在固化步骤前发生20- 50%的表面收缩。
Preferably, the adhesive layer is penetrated by the needled fibers during the needling step and the product is shrunk in area by 20-50% before the consolidation step.
太空地质学家猜测这些陡坡是在几十亿年前当行星表面冷却收缩时开始形成的。
Astrogeologists suspect that these scarps having formed billions of years ago as the planet's surface cooled and shrank.
试想一下，有一个橡皮圈箍在苹果的表面上，然后这个橡皮圈慢慢的收缩，就像从苹果表面上滑落一般的收缩，直到它变成了一个点。
Imagine an elastic band stretched over the surface of an apple. The band can slowly shrink, moving as though it is slipping from the surface, until it becomes just a dot on the apple's skin.
信使号太空船在德加陨石坑表面观测到因熔融冷却收缩所产生的斑驳裂痕。
In MESSENGER's view, the crater floor is seen to be filled with an intricate series of cracks, formed as the molten surface resulting from the impact cooled and contracted.
通过热重、红外-热重联机对纤维增强热收缩制品的表面基材改性聚乙烯的热稳定性进行了研究。
The heat stability of modified PE in the surface materials of heat shrinkable articles reinforced by glass fiber was studied by means of TGA, TGA-IR.
太空地质学家猜测这些陡坡可能类似于葡萄干上的皱纹，是在几十亿年前当行星表面冷却收缩时开始形成的。
Astrogeologists suspect these scarps may be analogous to the wrinkles on a raisin, having formed billions of years ago as the planet's surface cooled and shrank.
凹槽：由材料收缩不一致引起的表面中断，下陷，凹洞。
SINK: Surface discontinuity, depression or dimple caused by non - uniform material shrinkage.
焊缝成型的变化是电弧收缩与表面张力变化双重作用的结果。
The transformation of weld forming is the results of dual functions of arc shrink and surface tension change.
基于顶点对迭代收缩的表面简化方法，提出一种建筑物多分辨网格的生成与显示算法。
A novel algorithm based on iterative edge contraction surface simplification method was proposed to (generate) and display the multi-resolution building meshes.
表面基本上平滑光亮，无明显收缩凹痕，斑纹，翘曲，气泡及塑化不良等缺陷。
Basically smooth and shiny on the surface, have no obvious fault of contraction dent, brindle, warpage, defective bubble and plastify.
涂层与基体表面的温度差会使涂层产生收缩应力，引起涂层开裂和剥落。
Coating and the substrate surface temperature of the coating would have a bad contraction stress, caused by cracking and peeling off the coating.
结果表明，A-TIG焊电弧是否产生收缩与所使用的活性剂有关，即使在电弧未产生收缩情况下，表面活性剂仍然对焊接熔深的增加有较大的作用。
The results show that whether the arc of A-TIG welding shrinks is related with active flux used. The surface active flux still has the effect on weld pool depth even when arc does not shrink.
为了减少收缩和塌陷，在填充前可以用气体给模具加预压，或者可以在非表观面与型腔表面之间注入气体。
For shrinkage and sink reduction, molds can be pre-pressurized with gas before melt is injected, or gas can be introduced between the non-appearance side of the part and the mold.
在方坯横截面上，铸坯表面中心和角部的收缩量明显大于偏角部。
In the cross section of square billet, the shrinkage values in the center of billet surface and billet corner are obviously bigger than that in the off-corner.
钢锭缺陷广义上可分为内部缺陷和表面缺陷。内部缺陷是因收缩引起的。
Ingot defects may be broadly classified into internal flaws and surface flaws. Internal flaws are caused by shrinkage.
这就意味着月球表面也收缩了。但这种变化是不能用肉眼察觉到的。
That means the surface has shrunk, too, though not so you'd notice just from gazing at it.
月球的收缩使月球部分表面像葡萄干那样起皱，从而形成为“瓣状陡坡”…
The shrinkage has wrinkled parts of the moon's surface like a raisin, creating pinched formations called lobate scarps…
研究在非线性多孔收缩表面上黏性磁流体(MHD)的流动。
The MHD flow of a viscous fluid towards a non-linear porous shrinking sheet was investigated.
当一块肌肉完成持续的收缩时，所记录的表面肌电信号的分析是一个用于评价局部疲劳进行性的有用的工具。
The analysis of the surface myoelectric signal is a valuable and the signal is recorded while a muscle is performing a sustained contraction tool for assessing the progression of localized fatigue.
为阐明比表面对无压烧结初期致密化行为的影响，研究了氧化钛陶瓷的烧结收缩行为。
The shrinkage behaviors of TiO2 were investigated to clarify the effect of specific surface area on the densification behaviors at the initial sintering stage.
优选的，所述壳体的表面流线型由头部到尾部逐渐收缩，所述后开口围绕所述壳体的中心线对称分布。
Preferably, the streamline surface of the shell is gradually shrunk from the head to the tail, and the rear openings are symmetrically distributed around the Central Line of the shell.
金属卡条内侧白线和产品表面的温度指示漆可指导加热收缩恰到好处；
Under the guidance of the white line inner the metal zip fastener and the indicative paint external the products, the products can be shrunk well.
本文旨在通过分析肌肉在静动态收缩的过程中表面肌电特征参数的变化，研究肌电信号中的疲劳特征。
The purpose of this thesis is to analyze the characteristic parameters of sEMG during muscle static and dynamic contractions, and to study sEMG characteristics of muscle fatigue.
分析了短路液桥的重力、表面张力、电磁收缩力、气体爆破力、粘滞力的特点及其对短路过渡过程的影响。
This paper analyzes that the characteristics of several forces such as surface tension, electromagnetic pinch, gravitation and viscosity etc. act on short circuit liquid bridge.
电线经受热收缩试验，收缩率应不超过2%。电线表面应不出现裂纹。
Cable shall endure heat shrinkable test; shrinkable ratio shall be no more than 2%; no cracks appear on the surface of cable.
收缩率随着水泥石比表面积、结合水含量的增加而增加。
The shrinkage factor increases with the increase of specific surface area and the amount of banded water in hardened cement pastes.
与现有技术相比，具有生产能力高，生产过程无断丝、收缩、扭转等现象，生产的粉芯丝材成型效果好，表面光滑等优点。
Compared with the prior art, the mechanical device has no phenomena of wire breaking, contraction, torsion, and the like and has the advantages of high production ability, good molding effect, etc.
缩孔由于补充温降所造成的收缩，以致最后冷却的铸件位置极易形成表面低陷的缩孔，类似冒口的缩孔。
Shrinkage: Cause of the low temperature from a supplement so that the surface of the cast that being cooled will be shrunk. Just like the shrinkage of the raiser.
一般情况下，表面张力促进熔滴过渡，电磁收缩力对熔滴过渡的影响则与短路液桥的形态有关。
Generally, surface tension constantly promotes droplet transfer, but the action of electromagnetic pinch force is associated with the shape of short circuit...
一般情况下，表面张力促进熔滴过渡，电磁收缩力对熔滴过渡的影响则与短路液桥的形态有关。
Generally, surface tension constantly promotes droplet transfer, but the action of electromagnetic pinch force is associated with the shape of short circuit...
应用推荐