本文最后分析了表面形貌的表征问题。
Finally, the problem of characterization of surface topography is analysed.
并对镀层的表面形貌和性能进行了测定。
并对镀层的表面形貌和性能进行了测定。
And morphology and performance of the coating has been examined.
工件表面形貌特征的分析。
原子力显微镜扫描对醛基化玻片表面形貌进行分析。
Scanning aldehyde group glass slide by atomic force microscopy study the surface shape.
用原子力显微镜作为测量工具，获取表面形貌数据。
And the surface texture data by atomic force microscope (AFM) are obtained.
表面形貌剂-一种用来测量晶圆片表面形貌的工具。
Profilometer - a tool that is used for measuring surface topography.
薄膜的表面形貌由扫描电子显微镜（SEM）测定。
The surface morphology measurement of the films was performed with SEM.
研究了硅钢片表面形貌与迭装摇片性能之间的关系。
Relationship between the surface and assembling properties of silicon sheets are investigated.
聚焦探测法是表面形貌非接触测量中的主要方法之一。
Focus detection method is one of the primary non-contact measurement methods of surface topography.
SPPS法制备的涂层表面形貌呈现明显的层状结构。
Surface morphologies of coatings prepared by SPPS presented obvious layer structure.
对比分析了电流密度和添加剂对电铸层表面形貌的影响。
Comparing and analyzing the effects of current density and additives on surface morphology of the electroforming deposit.
采用扫描电子显微镜观察分析了复合材料磨损表面形貌。
The worn surfaces of the composites were observed on a scanning electron microscope.
钛种植体表面形貌是钛种植体表面改性的研究热点之一。
Surface microstructure is a research focus in the area of titanium implant surface modification.
精确合理的铣削过程模型是研究铣削加工表面形貌的关键。
Precisely and reasonably modeling for milling process is the key to study milled surface topography.
利用SEM、XRD等对薄膜的结构和表面形貌进行分析。
研究了衬底温度对薄膜结构、表面形貌以及介电性能的影响。
Investigated were the effects of substrate temperature on the structures and surface morphology, dielectric properties of films.
研究了化学镀锡溶液组成和工艺条件对镀层表面形貌的影响。
The effects of the composition and controlled conditions of electroless tin plating on the morphology of coatings are investigated.
当相对波度为高频的粗糙度时，只需考虑表面形貌的幅值效应。
But, when relative waviness comes into roughness, only the amplitude effect of surface topography should be considered.
并得出了面粗糙度比线粗糙度更能体现试件表面形貌特征的结论。
It is concluded that surface roughness can better reflect the characteristic of the sample's surface than line roughness.
利用XRD和SEM分别对氧化膜的相组成和表面形貌进行了分析。
XRD and SEM were employed to characterize the phase component and surface morphology of the films.
STM分析得知，电致变色反应使薄膜的表面形貌也发生了剧烈的变化。
The STM results disclose that electrochromic reaction make a great change in the morphology of films.
例如，生命科学影像往往依赖于研究高度绝缘的轻型有机材料的表面形貌。
Life science imaging, for example, often depends on studying surface morphology on lightweight organic materials that are also highly insulating.
对长脉宽脉冲激光弯曲后的硅片试件进行了表面形貌以及晶相等特性分析。
Surface properties such as profile and crystal phase of bent silicon samples by long laser pulses were analyzed.
为了研究阳极氧化工艺条件对硬质氧化膜的厚度、耐蚀性、表面形貌的影响。
The effects of anodic oxidation process on thickness, corrosion resistance and surface morphology of hard oxidation film were studied.
采用扫描电镜（SEM）对处理过和未处理过的铝合金表面形貌进行了分析。
SEM was used to analyse the untreated and treated Al alloy surfaces.
采用电化学等方法研究了硫酸镍和水合肼对化学镀锡层厚度及表面形貌的影响。
The effect of nickelous sulfate and hydrazine on thickness and appearance of electroless tin coatings were studies by electrochemical methods.
机械加工表面形貌表征和评价一直都是表面计量学和摩擦学领域最重要的课题之一。
Characterization and evaluation of machined surface topography has always being one of the most vital and appealing issues in the area of surface metrology and tribology.
在实验的基础上，对磨削过程振动特征以及由此产生的磨削表面形貌误差进行研究。
The vibration characteristics of external plunge grinding and the ground surface profile error are investigated through experiments analysis.
在实验的基础上，对磨削过程振动特征以及由此产生的磨削表面形貌误差进行研究。
The vibration characteristics of external plunge grinding and the ground surface profile error are investigated through experiments analysis.
应用推荐