一般情况下，超疏水表面可以通过两种方法来制备：在疏水性表面构建粗糙结构或者在粗糙表面修饰低表面能物质。
One is to create a rough structure on a hydrophobic surface, and the other is to modify a rough surface by materials with low surface free energy.
方法本实验以氯仿为溶剂，调节plga溶液浓度和流量分别制备了具有不同表面形貌的纤维支架。
Methods with chloroform as the solvent, the PLGA fiber scaffolds with different surface morphology were produced altering PLGA solution concentration and the flowing rate.
铸造烧结法是一种制备铁基表面复合材料的新工艺方法。
Casting sintering is a new technique by which iron-based surface composites are produced.
介绍了纳米粒子制备过程中的分散、表面双电层理论、干燥方法、表面修饰与表征方法。
The dispersion, double electrical layers theory, drying methods, surface modification and characterization methods in preparing process of nanometer particles were introduced in this article.
本文综述了单分散磁性氧化铁纳米粒子的主要制备方法、表面修饰以及在生物医学靶向药物方面的应用研究进展。
The progress of preparation method and surface modification of monodisperse magnetic iron oxide nanoparticles, as well as their application in the magnetic targeted drug are reviewed.
简述了白炭黑的结构、表面改性和制备方法，以及近年来的应用情况。
This paper introduces the structure, surface modification, preparation methods of silica white, and its application in recent years.
讨论了不同碳纳米管的制备方法、碳纳米管的类型、碳纳米管的表面处理等因素对复合材料性能的影响。
The effects of the preparation method, the type and the surface treatment of CNTs on the property of the composite were discussed.
该方法工艺简单，不受铸件形状和尺寸的限制，可用于表面增强金属材料的规模化制备。
Owing to the simplicity in process and the applicability for various shape-and size-casts, the technique allows the mass fabrication of metal -based surface composites.
建立和完善了表面活性剂生物降解度的测定方法，包括活性污泥的制备、培养、驯化和降解等试验过程。
Establishing and perfecting the method of determining degradation extent, including the process of preparation of actived sludge, cultivation, domestication and degradation of surfactant.
综述了碳纳米管的结构、制备方法及其潜在的应用领域。着重讨论了碳纳米管在表面工程中的应用方面的研究现状及其进展。
Structure, synthesis methods and the potential application of carbon nanotubes are reviewed in this paper. And its application status and development on the surface engineering are emphasized.
采用表面修饰的方法在水醇的混合溶剂中制备出了在空气中性能稳定的纳米铁硫簇。
Steady Iron_sulfur nanoclusters were synthesized in the mixed solvent of water and ethanol with surface modification method.
由于纳米粒子的表面效应，用湿法制备出的纳米粉体的前躯体在干燥过程中极易形成团聚，已经不能采用传统的干燥方法。
Due to the surface effect of nanoscale particle, the precursor of nanoscale powder prepared by wet process can form aggregation easily, and so cannot be dried by usual techniques.
提出了一种制备银膜的新方法，此法的优点在于能主动控制银膜表面微观结构。
A novel method fabricating silver nano-film has been presented, by which we may control the surface microstructure of silver film easily.
射线辐射高分子材料表面接枝共聚合是一种绿色的、重要的有机生物材料合成制备方法。
Irradiation graft copolymerization becomes a green and important synthetic strategy for surface functionalization and facile preparation of new organic biomedical materials.
方法：采用真空等离子喷涂技术，在钛基材表面制备含磷酸锆载银抗菌剂的抗菌羟基磷灰石涂层材料。
METHODS: The antibacterial hydroxyapatite coating material which contained silver-zirconium phosphate antimicrobial was prepared on the Ti implant by using vacuum plasma spraying technology.
此外，采用不同方法制备了多孔硅样品，分析了其表面形貌并用显微拉曼光谱法测定了导热系数。
Furthermore, different porous silicon samples were prepared, and whose surface morpho - (logy) analysis and thermal conductivity measurement using micro-raman technology were performed.
由于纳米粒子的表面效应，用化学沉淀法制备出的纳米氧化物的前驱体在干燥过程中易形成团聚，不易采用传统的加热方法干燥。
Due to the surface effect of nano particle, the precursor of nano oxide prepared by chemical precipitation method can form aggregation easily, and so can not be dried by usual techniques.
制备表面抗菌不锈钢的方法有化学热处理、磁控溅射、离子注入、溶胶-凝胶和化学沉积。
There are various methods to obtain antibacterial surface on stainless steels, such as chemical heat treatment, magnetron sputtering, ion implantation, Sol-Gel, and chemical deposition.
对用化学方法制备的天然胶乳浸渍制品表面起皱进行了研究。
The wrinkling on surface of nature latex dipped products by chemical treatment was studied.
研究了用于制备高比表面积活性炭的改质煤沥青的调制方法。
Methods of modified coal tar pitch for preparing high specific surface area activated carbon were studied.
通过有机镀膜的方法，利用一种自设计合成的三嗪硫醇化合物(ttn)在铜表面制备有机薄膜。
A designed organic compound of triazine thiols monosodium (TTN) was used for preparing polymeric film (PTT) on pure copper by polymer plating.
探讨了用液相电解沉积法在钛合金表面制备类金刚石薄膜的新方法。讨论了不同沉积条件对膜的影响。
In this paper, Influence of deposition condition on diamond-like carbon(DLC) fil ms byliquid deposition onthe surface of Ti alloy was discussed.
简要介绍了无机表面包覆的方法、原理，并综述了我国无机包覆型复合粉体制备研究现状。
The method and principle of preparing complex powder coated with inorganism was introduced and the research status of preparing complex powder coated with inorganism in China was reviewed.
BET比表面表明，适宜的硅溶胶浓度可以使催化剂具有较大的比表面积，但制备方法对比表面积影响不大。
It was shown by BET surface area that the suitable concentration of silica sol could make the catalysts have bigger surface areas, but preparation method had little influence on surface area.
采用气相沉积的方法在硅油表面成功制备了一种新型的铁薄膜系统，并研究了该薄膜的生长机制及其带状有序结构。
A new iron film system, deposited on silicone oil surfaces by vapor phase deposition method, has been fabricated and its growth mechanism and band-shaped ordered pattern were studied.
综述了钢铁表面形成氮化硅薄膜的基本过程，各种制备方法、特点及影响因素。
The principal mechanism of formation of silicon nitride layer on iron surface is described, and variety of production processes and influence factors are reviewed.
综述了驱油用表面活性剂种类、制备方法、应用和研究趋势。
The kinds, methods, applications and development trend of surfactants for EOR were reviewed .
本文综述了N酰基肌氨酸钠阴离子表面活性剂的制备方法和产品性能及其在化妆品、个人卫生用品和其它工业部门中的应用。
In this paper, The preparation, properties of sodium Nacyl sarcosines and it's applications in personal hygienic products and other industrial fields are reviewed.
介绍纳米材料的特性、制备方法及聚合物基纳米复合材料中纳米材料的表面处理方法。
Introduce the characteristics and preparation methods of nanometer materials as well as its surface-treating methods in the polymer-nanometer material composite.
介绍纳米材料的特性、制备方法及聚合物基纳米复合材料中纳米材料的表面处理方法。
Introduce the characteristics and preparation methods of nanometer materials as well as its surface-treating methods in the polymer-nanometer material composite.
应用推荐