同时综述表面分析技术的现状及其发展前景。
At the same time, it sums up the present situation about the surface analysis and its developing foreground.
综述了工业催化剂表征中常用到的几种表面分析技术。
This paper reviewed several common surface analysis techniques on catalyst used in industry.
采用表面分析技术分析了膜的成分并观察了膜的微观形貌。
The microstructure of the coatings were investigated by scanning electronic microscopy (SEM), and the chemical composition of the coatings was analyzed.
介绍了辉光放电光谱技术的原理及与其它表面分析技术的比较。
The principle of glow discharge optical emission spectrometry was introduced in this paper, and was compared with other surface analysis techniques.
概述了流动注射(顺序注射)可更新表面分析技术及应用的新进展。
An overview is presented on the new development of renewable surface techniques for flow injection or sequential injection analysis.
本工作应用表面分析技术研究了工业纯钛在溴化钠溶液中的孔蚀引发过程。
The pit initiation process on commercially pure titanium in bromide solution was investigated by means of surface analysis.
随着技术的不断进步，一些表面分析技术逐渐地被应用于涂层结构的分析中。
With the progress of technology, several surface analysis techniques are applied in studying coating layer structure.
应用现代表面分析技术研究了Q 235钢在硫酸盐还原菌(SRB)环境中的腐蚀行为。
The corrosion behaviour of Q235 steel in sulfate-reducing bacteria (SRB) environment was studied with modern surface analysis technologies.
应用电化学和表面分析技术研究了砷对H _(62)与H _(68)黄铜脱锌效应研究。
The inhibiting effect of arsenic on the dezincification of H_ (62) and H_ (68) brass has been investigated by electrochemical and surface analysis techniques.
同时也表明，XPS作为一种重要的表面分析技术将会在商品检验和产品检验中得到有效地应用。
XPS as a important method for analyzing surface will be used in product and commodity inspection.
例如，技术人员可以通过其化学成分分析其创作日期，或者对一幅画做X光透视，揭示其表面下有什么。
Technicians can date paint from its chemical composition, for example, or X-ray a canvas to reveal what lies below the surface.
采用冷等离子体技术处理涤纶纤维，利用ESCA分析了冷等离子体处理前后的纤维表面元素组成、官能团类型的变化。
The PET fibers are treated by cold plasma technology and the elemental composition and the type of functional groups of the surface of PET was analyzed by ESCA.
随后分析了橡胶模具的加工技术、选用材质、表面处理、模具污染及模具清洗等情况。
Afterwards analyzed the rubber mold machining technology, selected material quality, surface treatment, mold pollution and mold clean situation and so on.
针对合金篦条材料表面进行等离子渗碳技术的试验研究和渗层的耐磨性能实验分析。
Experimental study of plasma carburization technology and analysis of wear test of carburizing layers are done aimed at alloy bar grate material surface.
可以使用氦离子显微镜进行离子散射能谱分析，从而将这项灵敏度最高的表面技术应用于同时要求具有空间分辨率的分析任务中。
Ion scattering spectroscopy can be carried out with HIM, allowing this most surface sensitive technique to be applied to analysis tasks where spatial resolution is also required.
分析并解决了测量过程中的技术难题，对纳米表面微观形貌进行了高精度实时自动测量。
Some technical difficulties existed in the measurements are analyzed and solved. The high accuracy real time measurements of nanometer surface microtopography are carried.
对血泵材料的血液相容性和生物组织相容性进行了分析，并且对目前常用生物材料的表面处理技术进行了比较。
The paper analyses blood compatibility and tissue compatibility of blood pump material and compares the surface treatment technology of the current commonly-used biomaterial.
采用模匹配技术对带通型频率选择表面进行分析，其中单元内的场用有限元法解出。
In this paper, band pass frequency selective surface was analyzed by mode matching technology.
研究了经碱性亚钠法处理的马尾松化学预热机械浆(马尾松ctmp)纸页强度指标并利用XPS和AF M技术分析了纸浆纤维的表面性质。
The paper strength index of masson pine CTMP was studied after alkaline sodium sulfite treatment, the pulp fiber surface properties of the masson pine CTMP were analyzed with XPS and AFM.
介绍一种用于零件表面强化的新方法—冲击滚压。分析了该项技术的特点及其应用前景。
A new method of shock and rolling is introduced for surface-strengthening of machine part. The technology and its potential applications are described in detail.
在分析各种表面强化工艺优劣的基础上，介绍了这一技术对模具寿命的影响。
All kinds of surface strengthening technique have been introduced with introduction to effect on die service life and comparison among respective application.
利用傅立叶红外光谱（FTIR）和X射线光电子能谱（XPS）技术，分析桦木单板化学镀前预处理后，桦木表面官能团的变化和化学镀后元素的变化。
The variation of function group and element on it was analyzed in the pre-treated and plated process by FTIR and X-ray photoelectron spectroscopy(XPS) analysis technology.
分析铜箔表面质量缺陷对电力变压器电气性能的影响，研究采用机器视觉系统对铜箔表面质量缺陷监视的关键技术。
The influence of copper foil surface quality on electrical performance of power transformer is analyzed, the key technology for monitoring the surface flaw with machine vision system is studied.
分析列举了近些年来国内外利用各种表面技术手段制备纳米结构表面的进展和成果。
The progress and production of using surface engineering technology to produce nano-structured surface in and out our country were analyzed.
本文作者采用冷等离子体技术对PET缝编碳纤维织物进行表面处理，并采用AF M对处理前后的碳纤维表面形貌进行了分析。
In this paper, cold plasma technology is used to treat the surface of carbon fibers braided by PET and the surface microstructure of the carbon fiber is analyzed by AFM.
说明和分析了反求工程在制造领域中的几个关键技术：仿形测量技术、成形制造技术和表面再现技术。
This paper introduces some key technologies in the field of manufacture about reverse engineering, such as technology of profile modeling, figuration manufacture and surface reproduction.
该方法利用时间序列分析技术，对滚动轴承振动信号进行建模和谱分析，找出引起轴承振动的表面因素。
The vibration signal is modeled and analyzed by using the technique of time series analysis, and the main factors of the surface waviness which cause the ball bearing vibration are detected.
表面等离子体谐振(SPR)技术由于独特的优点日渐成为生物分子相互作用分析的领导技术。
Surface Plasmon Resonance (SPR) technology has been becoming a leading one for biomolecular interaction analysis because of its specific advantages.
硅片直接键合（SDB） 技术的关键在于硅片表面的亲水处理，本文分析了亲水处理之微观机理。
Successful Silicon to silicon direct bonding(SDB)mainly depend on the hydrophilicity treatment of silicon surface. Micro mechanism of hydrophilicity has been analyzed in the paper for the first time.
本文通过分析和试验，报告了搪瓷工业的一种新工艺——激光金属表面搪瓷及搪瓷制品的激光修补技术。
In this paper, a new technology in enamel industry is reported th-rough analysis and experiments. lt is the metal surface enamel and the mend of enamel products by a laser.
应用推荐