硅锭的表面光洁度也可以得到测量。
修饰是该表上的表面光洁度。
它提供了工具寿命和极为良好的表面光洁度。
It provides longer tool life and extremely good surface finish.
铸件尺寸精确，表面光洁度和内在质量稳定。
The casting is accurate in size, surface smooth finish and inherent quality are steady.
提高产品表面光洁度，使表面光洁度可达到镜面。
粒度对表面光洁度和整体切割速度具有重大影响。
Granularity has great influences on the surface finish and integral cutting speed.
提高产品表面光洁度，使表面光洁度可达到镜面。
精密制造技术总是要求一个好的表面光洁度低成本。
The precision manufacturing technology always demands a good surface finish at low cost.
供电是手工光滑，所以可以生产出更好的表面光洁度。
Power feed is smoother than manual feed and, therefore, can produce a better surface finish.
这样具有良好表面光洁度的高质量钢锭就生产出来了。
Thus a high quality ingot with good surface finish is produced.
这样具有良好表面光洁度的高质量钢锭就生产出来了。
Thus a high quality ingot with good surface finis. is. produced.
可是在塑性材料加工时，造成表面光洁度和刀具寿命低。
However, in case of ductile materials they cause poor surface finish and low tool life.
在高速加工时获得了高的加工精度与良好的表面光洁度。
High accuracy and fine surface quality can be obtained while machining speed is high.
首先，它通过去除所有机加工痕迹能产生较好的表面光洁度。
Firstly, it produces a superior surface finish with all machining marks being removed from the surface.
这种层层叠加的制造技术会影响零件的表面光洁度和尺寸精度。
The layer by layer building process introduces an error which affects the dimensional accuracy as well as the surface finish.
单晶基片的表面光洁度指标是影响后续薄膜生长质量的重要因素。
The surface smoothness of the single crystal substrate will be the most important factor, which influences the quality of the epitaxial film growth.
珩磨机：用于对内圈、外圈和滚道进行珩磨来提高表面光洁度的设备。
HONER : Machine which uses honing tape to improve surface finish of cups, cones, and races.
凸模和凹模，可根据客户要求进行精加工，表面光洁度高，公差准确。
Punch and die, according to customer requirements for finishing, surface finish, tolerances.
土壤摩擦力还随固体表面光洁度降低而增加，随表面硬度增加而趋于减小。
The friction increases with the decrease in solid surface finish and tends to decrease with the increase in its surface hardness.
每个黑色和白色的二维码代码点和表面光洁度不同的不锈钢外墙板相关联。
Each black and white QR code dot is associated with a stainless steel cladding panel with different surface finishes;
依赖于表面光洁度、衬垫材料和机械状况，用这些接头可以获得更慢的泄露率。
Slower leak rates can be obtained with these connections depending on surface finishes, gasket materials, and mechanical condition.
铝件在电解氧化前往往需要进行化学抛光处理，以增加其表面光洁度和光亮度。
The aluminum often needs to carry on chemical polishing processing before the electrolytic oxidation, increases its surface smooth finish and the radiance.
阀杆和填料腔壁。精确的圆度和平直度，高级8-16RMS或镜面表面光洁度。
Stem and packing chamber walls. Close roundness, straightness and superior 8–16 RMS or burnished surface finish.
本发明具有缝隙釉料与瓷砖紧密结合、表面光洁度高、不渗水清洁方便卫生等优点。
The invention has the advantages of tightly combination of the slits glaze and the tiles, high surface finish quality, water-proof and cleaning conveniently and cleanly.
由于机加工能获得比其它制造作业更好的表面光洁度，所以机加工作业具有实用价值。
Machining operations are utilized in view of the better surface finish that could be achieved by it compared to other manufacturing operations.
一般而言，磨削被认为是一种通常用于获得高尺寸精度和较好表面光洁度的精加工作业。
Generally, grinding is considered to be a finishing process that is usually used for obtaining high-dimensional accuracy and better surface finish.
合适进给的选择取决于许多因素，例如所需表面光洁度、切削深度和所用刀具的几何形状。
The selection of a suitable feed depends upon many factors, such as the required surface finish, the depth of cut, and the geometry of the tool used.
采用进口预浸布作为原材料，槽线与管体二次固化整体成型，表面光洁度和力学性能优异。
Using Imported Prepreg as the Raw Material, the Second Overall Compression Molding for External Trough Line and the Tube, Excellent Surface Finishment and Mechanical Performance.
精密加工的阀杆和填料腔。阀杆和填料腔壁的平直度、圆度和表面光洁度是最基本的要求。
Precision stem and packing Chambers. Straightness, roundness and fine finish of stem and packing chamber wall are essential.
精密加工的阀杆和填料腔。阀杆和填料腔壁的平直度、圆度和表面光洁度是最基本的要求。
Precision stem and packing Chambers. Straightness, roundness and fine finish of stem and packing chamber wall are essential.
应用推荐