结果表明，该方法制得的材料具有单一的橄榄石结构，样品形貌规则、颗粒均匀。
The results show that materials with a single olivine structure, rules of the sample morphology and particle uniformity.
结果表明，随激光功率增大和焊接速度降低，复合焊与单一激光焊焊缝的横截面形貌均由钉形向近X形转变。
It showed that the weld cross section with both laser welding processes transformed from nail shape to near X shape with increase of laser power and decrease of welding speed.
数据表明：反应物的混合方式对前驱沉淀物及粉体的尺寸和形貌都有很大的影响。
The data showed that the mixture ways of reactants influenced the size and the appearance of the pioneer precipitate and powder.
结果表明，残留碳化物形貌和数目是影响球化的两个关键因素。
The results show that both shape and number of residual carbides are two key parameters affecting the spheroidization.
结果表明：不同均化手段对产物的结构并不产生影响，但影响产物的粒径、形貌和分散性等。
The results show that different homogenization methods have no effect on the microstructure except the particle size and morphologies of PbS nanoparticles.
结果表明，该膜层的成分、形貌及结构与常规氧化膜有很大的区别，是一种新型铝氧化膜。
The results show that the film, greatly different from conventional oxide films in composition, morphology and structure, is a novel aluminum oxide film.
实验结果表明：随着煅烧温度的升高，铁红颜色逐步加深，由橘红变为紫红，铁红的形貌也发生了变化。
The experiment results show that with calcining temperature rise the color of ferric red gradually deepened from mauve to chrysoidine , morphology of ferric red also changed.
模拟结果表明，热障涂层中的残余应力是界面形貌尺寸的函数。
The result shows that the residual stress in thermal barrier coatings is a function of interface topography parameters.
结果表明：喷丝速度对PAN纤维截面的规整性、表面形貌、异形度、声速取向和致密性等均会产生影响。
The results showed that the extrusion speed had effects on the irregularity of cross section, surface morphology, profile degree, sonic orientation and compactness of PAN fiber.
结果表明，热镀梓板有典型的锌花形貌，明亮和灰暗锌花区的形貌差异大；
Results show that hot galvanizing plate has typical spangle appearance, and the appearances distinguish in bright zone and gray zone.
实验结果表明，金刚石砂轮磨粒尺寸和磨削深度对磨削表面的微观形貌如几何形态和表面纹理具有重要影响。
Experimental results show that the grain size of diamond grinding wheel and grinding depth have important influence on micro-topography such as geometrical shape and surface topography etc.
结果表明：稀土变质及热处理均能改善碳化物的形貌，提高其冲击韧度，且两者的综合作用效果更明显。
The results show that rare earth modification and heat treatment all can improve eutectic carbide morphology and increase the impact toughness, and both comprehensive result is more noticeable.
结果表明，WC颗粒的形貌、成分发生了较大的变化，但显微硬度并没有发生明显的下降。
The results shows that the morphology and the composition of WC particles have been changed considerably, while the microhardness has not been decreased obviously.
结果表明，失效形貌呈典型的接触疲劳特征，两种疲劳裂纹形成模式同时存在。
The results showed that failure morphology was of typical contact fatigue characteristics, and two modes of fatigue crack formation worked.
用扫描电子显微镜（SEM）对PNDEA接枝层表征结果表明，用不同接枝手段所制备的接枝膜具有不同的表面形貌。
The SEM images of the PNDEA grafted layers prepared by different grafting methods have different surface morphology.
结果表明，超滤膜表面形貌愈粗糙，膜通量的衰减速率愈快，且化学清洗后恢复愈困难。
The results indicates that the rougher the membrane surface morphology is, the faster the speed of flux decline, and the harder to recover by chemical cleaning.
结果对比表明，这种W - M函数可用于微镜表面的建模和形貌分析。
The result shows that the W-M function is efficient in creating models and analyzing the topography of MEMS surface.
实验表明，若要得到定向形貌，沉积几何需有严格的限制。
The experiment shows that the geometry of deposition should be defined in order to gain the oriented morphology.
微观形貌观察表明产物呈规整球形结构。
The morphology observations showed that the products were regularly spherical in the shape.
共混体冲击断面形貌的SEM分析表明其增韧机理为剪切屈服机理。
The impact fracture surface morphology observed by SEM showed that the toughening mechanism of the blend was in accordance with that of the shear yielding.
结果表明，钛合金活性焊剂对焊接接头的宏观组织形貌有明显影响，但对焊接接头的化学组成没有影响。
The results showed that the activating flux has a visible influence on the crystal structure of welds, but has no relationship with the composition of the welds.
研究表明该钢具有较好的抗应力腐蚀性能，其应力腐蚀断裂形貌为穿晶、解理断裂，并有二次裂纹。
The stress corrosion cracking sensitivity of the steel was low, and the fractography of its stress corrosion cracking showed transgranular and quasi-cleavage fracture with secondary cracks.
踏面斜裂纹及断口的宏观形貌和理化检验与分析表明，踏面斜裂纹伤损属于滚动接触疲劳裂纹伤损类型。
The macro profile and physicochemical examination of the tread oblique crack shows that the crack falls into the category of rolling contact fatigue type.
对支撑梁蚀坑形貌的检查和分析表明该腐蚀为小孔腐蚀。
The check and the analysis of the pattern of corrosion pit indicated that it was pit corrosion.
应用分形理论对弹头磨损表面形貌进行了研究，研究表明，其表面磨损形貌的不规则和随机分布性具有分形特征。
The topography of bullet surface wear was studied by using fractal theory. The irregularity and random distribution of its surface wear show the fractal characteristics.
结果表明，产物的形貌极大地取决于表面活性剂的组装结构和它们与反应物间的配位作用。
The results suggest that the morphology of the product is largely dependent on the assembly structure of the surfactant and the coordination between the polyelectrolyte (surfactant) and the reactant.
结果表明，轴瓦的寿命与镍栅层的成分，形貌和元素的扩散有着密切的关系。
Results show that the bearing life is closely connected with the composition and appearance of the nickel-barrier layer and diffusion of the elements.
理论计算结果表明，表面形貌一定时，真实接触面积随着载荷的增大而增大；
Theoretical calculation results show that real contact area increases with the increases of the load when the surface topography is constant.
结果表明：不同均化手段对产物的结构并不产生影响，但影响产物的粒径和形貌。
The results show that different homogenization methods make no effect on the microstructure except the particle size and micrograph.
结果表明：不同均化手段对产物的结构并不产生影响，但影响产物的粒径和形貌。
The results show that different homogenization methods make no effect on the microstructure except the particle size and micrograph.
应用推荐