提出了鲁棒的内模补偿控制器I-PIP。
Propose a robust PI controller with position internal feedback compensation (PIP).
本文主要研究用于不平衡负载的SVC无功补偿控制器。
The control method of SVC for unbalanced load is mainly researched in this paper.
该方法用描述死区特性的参数构造死区逆来补偿控制器输出;
The dead-zone inverse is formed by the character parameters of dead-zone to compensate the output of controller;
TSC的核心技术是动态无功补偿控制器和晶闸管过零触发模块。
The important parts of the TSC are the dynamic reactive power compensation controller and the thyristor trigger circuit.
介绍了低压配电网无功功率自动补偿控制器的软件和硬件设计方法。
Hardware and software design of reactive power automatic compensation controller for low-voltage distribution systems is introduced.
基于结构不变性原理,以负载压力作为观测量,设计了摩擦力补偿控制器。
According to the structure invariance principle, a friction compensation controller is designed by choosing load pressure as the observed value.
本研究以电网无功补偿改造为背景,研制了一种低压无功功率补偿控制器。
This thesis is to design a controller which can adjust the electric power wire's reactive power which is under the background of the reconstruction of the wire's reactive power compensation.
进而通过实验结果对比,验证了流量补偿控制器在消除多余力方面的有效性。
The results prove that the methods flow compensation could effectively compensate the extraneous force from synchronization movement. The experiment results also validate the conclusion.
介绍了以8098单片机为核心的无功功率补偿控制器的硬件结构及软件设计。
This paper presents the hardware and software designs of a Var compen-satlon controller based on the 8098 microprocessor.
本文主要提出了一种采用工控机为控制平台的静止无功补偿控制器的设计方法。
A novel approach based on industrial computer of Static Var Compensator is presented in this paper.
然后,基于某型小卫星的姿态控制问题,设计了高精度定向阶段的神经网络补偿控制器。
Then, base on the problem of attitude control of a satellite under development, we design a NN compensation controller for high accuracy orientation phase.
同时,通过削弱量化误差以及在设定点附近引入PI补偿控制器,提高了系统的动态、静态性能指标。
The dynamic and static performance index is greatly improved through decreasing quantization errors and combining with PI controller that operate nearby set point.
介绍一种以8031单片机为核心而构成的功率因数自动补偿控制器的工作原理及硬件电路设计、软件设计。
The paper introduced the work principle, hardware circuit design and software design of a power factor automated compensator composed mainly of 8031 single chip computer.
介绍一种以邓8031单片机为核心构成的功率因数自动补偿控制器的工作原理、测控硬件电路及测控软件的设计。
This paper introduces the theory of operation, measurement and control circuit design, software design of a power factor automated compensator, which is mainly designed with 8031 micro - controller.
介绍了用PIC系列单片机构成的智能无功补偿控制器,该控制器具有高性能、低价位、高可靠性、配置灵活的特点。
Introduce the intelligent reactive compensating controller based on PIC single computer, it has lower cost, flexible arrange, higher reliability and performance.
论文从控制系统的结构方面,利用结构不变性原理,针对位置扰动设计专门的前馈补偿控制器,减小位置扰动的影响。
By applying the structure invariant theory in the control strategy, the feedforward-feedback control theory is applied in the control system design to reduce the redundant force.
本文针对TCP网络系统的时滞特性,设计基于内模补偿控制器,提出了基于幅值与相位稳定裕度的控制参数整定方法。
The internal mode compensation controller is designed for the delay performance of TCP network system. The controller tuning method is presented based on the gain and phase margin.
介绍一种新型基于软开关投切技术的连续无功补偿方案,并设计出适用于该方案的基于ARM嵌入式微处理器的无功补偿控制器。
In this paper, a new kind of continuous reactive power compensator which is based on soft switching was introduced and a ARM-based controller was designed.
介绍一种新型的基于软开关投切技术的连续无功补偿装置,并设计出适用于该方案的基于ARM嵌入式微处理器的无功补偿控制器。
In this paper, a new kind of continuous reactive power compensator based on soft switching is introduced and an ARM-based controller is designed.
介绍一种新型的基于软开关投切技术的连续无功补偿装置,并设计出适用于该方案的基于ARM嵌入式微处理器的无功补偿控制器。
This paper presents a new type of continuous reactive compensator based on a soft switching technique and the design of an ARM-based controller.
针对网络控制系统存在的网络诱导时延这一基本问题,本文主要对其进行时延分析、系统建模和时延补偿控制器设计等三个方面的研究。
Since networked induced delay is one of the important problems of NCS, analysis, modeling and controller design for time delay in NCS are studied in this thesis.
其次,针对行波型超声电机的正向和反向速度特性不一致的情况,提出一种正、反向速度平衡补偿算法,并用硬件实现了平衡补偿控制器。
Secondly, aiming at losing balance between the CW and CCW rotation speed, a balancing compensation algorithm is put forward, and which is implemented with hardware.
在本例中,控制器会将FAILURE信号发送给协调器,从而以反转顺序调用补偿活动。
In this case the controller sends out a FAILURE signal to the coordinator, thus invoking the compensatory activities in reverse order.
活动必须注册控制器(或者更具体地说是控制器内的补偿管理器组件)。
Activities must register with the controller (or more specifically a compensation manager component within the controller).
在温差较大的地方,合格的控制器还应具备温度补偿的功能。
Place in a larger temperature difference, the controller should have qualified temperature compensation function.
充电控制器必须通过设置补偿这些不同特性。
The charge controllers must compensate for these differences through the charge controller settings.
针对振动状态的不可测量性,应用刚性控制规律设计了控制器,给出了一种补偿系统动力学对位置控制影响的方法。
A rigid controller for the unmeasured vibration states was designed and a compensatory method for the impact on position control caused by system dynamics was given.
本文提出当信道增益为时变函数时,利用自适应控制器来补偿信道增益的变化,以便在接收端能准确地恢复出信息信号。
In order to recover the message carrying signal at the receiving end, we use adaptive controller to compensate the variation of channel gain when the channel is time-varying.
本文提出当信道增益为时变函数时,利用自适应控制器来补偿信道增益的变化,以便在接收端能准确地恢复出信息信号。
In order to recover the message carrying signal at the receiving end, we use adaptive controller to compensate the variation of channel gain when the channel is time-varying.
应用推荐