第四代螺纹技术——螺塞反角螺纹设计,更易于安装,对棒抱紧力更强,进一步减少钉头体积。
Generation 4 Clousure Technology—A reverse-angle set screw designed to thread easier, hold stronger, and reduce the implant even.
他们的设计能够承受200磅的工作压力,带NPT螺纹,而不是空气压缩机的服务。
They are all designed for working pressure of 200 LBS with NPT threads, not for air compressor service.
科瑞电器厂是集设计、生产、研发各类电加热器、螺纹元件、机筒、芯轴的专业厂家。
Corey Electrical Appliance factory is a set of design, production, research and development all kinds of electric heaters, screw elements, barrel, Mandrel specialized factory.
初步探讨了确定螺纹桩承载力的设计计算方法,并将螺纹桩的静载试验结果与设计计算结果进行了对比。
The design and calculation method of the screwed pile are discussed. The result for load bearing capacity of the pile is verified by both experiment and projects.
论述了在薄板冲压件上,用变薄翻边冲制小螺纹底孔的工艺、冲模结构、设计与制作技术。
Discuss punching small thread fluted opening technology, die structure, die design and die manufacture technology on thin sheet.
该方案为今后发动机的螺纹联接设计和计算提供一条可行的路径,且对相关的工程实际应用具有很强的指导意义。
It provides a way for design and calculation of thread connection in engines and gives reference to the practical application of related project.
本论文为加工主轴箱箱体右侧十个螺纹底孔的组合钻床的设计。
This thesis combination machine for design processing many stalks the box ten screw threads of rights the bore bed.
据此设计的玻璃钢管道和圆锥梯形螺纹的成功应用,对类似设计,具有较强的指导作用。
It is believed that the successful use of the designed wound pipes and the taper trapezium threads can certainly direct the similar design.
作者设计了双颈滑动加压螺纹钉。
The authors designed a double barrele sliding compression screw.
另一方面,NPTF螺纹的设计用于保证在整个牙形上产生足够的变形以生成这种机械密封。
On the other hand, NPTF threads are designed to ensure that sufficient crushing of the entire thread form will take place to produce a mechanical seal.
内螺纹组件能够采用推板设计被从型芯上推出,假如塑性材料在推出阶段有足够的弹性。
The internally thread component may be stripped from the core using the basic stripper plate design providing the plastic material has sufficient elasticity during the ejection phase.
介绍了一种应用于大规格螺纹预紧的新型结构FROMO预紧螺母的结构设计,该结构螺栓只承受纯拉应力。
The design of a new pre-tensional structure (FROMOpreload nut) applied in the large size of screw thread was introduced, the pre-load bolt is only beared with the pure tensile stress.
此类垫片设计满足大范围的应用需求,常应用于分层印刷电路板,或充当螺纹螺母。
Designed for a wide variety of applications, these inserts are commonly used for stacking printed circuit boards or when a threaded spacer is required.
实现了PDC钻头螺纹部分的参数化设计,为进一步的CAE/CAM打下了坚实的基础。
The realizing of parametric design of screw thread of PDC bit makes CAE/CAM possible.
设计了一种新型室外消防栓,在消防栓中采用了复式螺纹机构,对传统的消防栓的结构进行了改造。
Design a new outdoor fire hydrant, fire hydrants in the compound have been adopted in the multi-screw mechanism, the traditional fire hydrant to the transformation of the structure.
目的设计记忆合金椎体螺纹撑开器,用来治疗骨质疏松性椎体压缩骨折。
Objective To design a kind of memory alloy springs, which can be used in treatment of osteoporosis vertebral compressed fracture.
单电机,螺纹管设计:结构简洁,传动件少。
Single-motor construction, simple screw tube design, few operating.
设计了螺纹脱模机构、浇注系统、螺纹转动保险机构和温度控制系统。
Thread demoulding mechanism, injection system, protect mechanism of thread rotation and temperature control system were designed.
反向旋转双螺旋桨搅拌器设计结合了独特的螺纹,在剪切奶酪时柔和搅拌奶酪,提高奶酪质量。
The counter-rotating twin-screw agitator design combined with the unique solid screw flights gently blends the cheese while it imparts a shearing action - improving quality.
单电机,螺纹管设计结构简洁,传动件少。
Single-motor construction, simp, e screw tube design, few operating parts.
提出一种专门用于检测工件端部的局部漏磁检测方法,介绍了一种油管螺纹漏磁检测传感器的设计方法。
A new MFL testing method which can inspect the end area of pieces is introduced and a kind of testing Sensor of tubing thread based on the digital MFL theory is described.
针对物镜筒注塑件,设计了一种内收式二瓣牙内螺纹模具结构。
Designed a injection mold with two teeth threaded core-pulling mechanism for the objective slide.
屏障型螺纹轴身输出质量优秀,几种设计已经成功的得以应用。
Barrier type screws will give the best quality output and several designs have been used successfully.
本文介绍了梯形螺纹丝杆的旋风铣削工艺,并对旋风铣刀刃形精确设计进行了公式推导和实例计算。
In this paper, the authors introduce a rotary cutting processing of acme screws and derive a formula for accurate design of rotary tools.
江阴大桥吊索特别设计了螺纹连接的叉型锚具,其吊索采用半平行钢丝索股和钢丝绳两种材料。
Fork type anchor devices with thread connections are specially designed for hangers of Jiangyin Bridge, and semi parallel wire strands, steel wire ropes are used for the hangers as well.
针对这种情况,分析了拆卸螺杆上螺纹发生损坏的原因,自行设计制作了新的拆卸套具及空心螺杆,取得了很好的效果。
Upon analysis of the screw thread damage on the dismantling screw, new dismounting kit and hollow screw have been designed and made by the plant independently a.
重点阐述自动旋转脱螺纹机构的设计要点。
The key points in designing the mechanism of automatic revolving de-threading are stated in detail.
旋片铣削螺纹是一种生产效率较高的螺纹加工方法。介绍了旋片铣削工作原理及其铣刀设计。
Screw whirling milling is one of the screw manufacturing processes with high production efficiency. In this paper the whirling milling principle and cutter design are described.
旋片铣削螺纹是一种生产效率较高的螺纹加工方法。介绍了旋片铣削工作原理及其铣刀设计。
Screw whirling milling is one of the screw manufacturing processes with high production efficiency. In this paper the whirling milling principle and cutter design are described.
应用推荐