特点：结合单刃良好排屑和螺旋切削，可大大提高切割速度的同时保证产品质量。
Features: crumbs fast-removing and helical cutting, it will greatly increase the processing speed while ensuring quality.
提出了超声研磨螺旋锥齿轮的理论与方法。 分析了超声研齿不灵敏性振动切削机理。
The paper presented the theory and method for the ultrasonic lapping of spiral-bevel and hypoid gears and analyzed its insensitive vibration cutting mechanism.
通常普通麻花钻的螺旋槽加工有三种方式：切削加工、扭制加工和磨削加工。
Usually there are three methods can be used to machine the spiral flute of twist drill, such as cutting, torsion, grinding.
给出了采煤机螺旋滚筒不均匀运动时截齿瞬时切削厚度计算的数学模型和程序框图。
The mathematical model and block diagram are presented to calculate the pick momentary cutting thick when the shearer drum is in the state of irregular motion.
该模型包括了钻头以及钻削操作的重要特性，即钻头的截面几何特征、螺旋角、转速和钻削过程中产生的切削力。
The model includes of important characteristics of drill bit and drilling operation, i. e. sectional geometrical property of drill, spiral Angle, speed and cutting force created during drilling.
螺旋刃刀片设计，切削平稳，安全可靠。
Spiral chip flute and helical cutting edge insert design, stable cutting condition, safety and reliability.
在圆柱螺旋曲面的盘形铣刀成形铣削加工工艺中，工件上的螺旋曲面实质上就是盘形铣刀切削刃回转面螺旋进给运动所形成的包络。
In the forming technique of cylindrical spiral curved surfaces, the contour of workpiece is virtually the result that disk shaped milling tools feed into the workpiece and move around its axis.
应用微分几何理论，给出了圆锥螺旋铣刀几何特性，据此导出了三维非线性铣削力模型，继而采用非线性规划识别切削力系数。
This paper sets up an instantaneous cutting force model for a spiral cylinder cutter by analyzing the linear relationship between micro-unit milling force and instantaneous uncut chip thickness.
根据单点切削力模型，考虑平头立铣刀多刃和具有螺旋角的特点，建立了铣削力离散模型。
Considering the features of multi-edges and helix flutes for end milling, a cutting force discrete model base on single point cutting tools model was built.
文章基于3.5轴数控铣床，利用螺旋线展开的平面曲线编程，分层切削，加工出变螺距螺纹；
Programming by the plane curve unwrapped from the helix curve and cutting layer by layer, we created the variable pitch screw on the 3.5 axis NC milling.
常见的共轭曲面包括齿轮的齿面、空间凸轮的工作面和螺旋面等，其中螺旋面被广泛应用于螺纹、蜗杆、螺杆泵及金属切削刀具等领域。
The common conjugate surface includes tooth surface of gear, working surface of solid CAM, helicoidal surfaces existing in spiral burr, worm, chip flute of cutters, and so on.
通过分析长螺旋钻机在切削各类土质时，钻具的角速度与土块运动机理关系，提出确定钻具临界的方法，而工程施工中钻杆的实际转速应大于临界转速，以提高钻机的工作效率。
An analysis related to various kinds of soil cutting by earth auger, this paper puts forward that running speed of frill should be faster than critical speed so as to increase the efficiency of drill.
通过统计学中的响应曲面法建立了螺旋铣削过程中切削力的二阶模型，并分析了主轴转速、每齿进给量、轴向和径向切削深度等因素对切削力的影响。
A quadratic model of predicting helical milling force was researched. The effects of spindle speed, feed per tooth, and axial and radial depth of cut were analyzed.
可修磨直柄丝锥前切削刃和前切削面，螺旋丝锥前切削面。
Can the grinding straight before cutting blade and hilt taps before, spiral taps block block before.
重视铝合金加工的切削锋利度。45度的螺旋角实现了良好的切屑排出性能。
Sharpness oriented for aluminum machining. Good chip evacuation by 45 degrees helix angle.
本文在高速滚齿机上，利用遥测应变仪，测定了工件材料，进给量，切削深度，切削速度，齿轮齿数及螺旋角等对力矩的影响，并得出径节为8时的力矩公式。
This paper presents the information of the effect, measured with a tele-strain-meter, of work material, feed, cutting speed, depth of cut, number of teeth and helix Angle etc.
本文在高速滚齿机上，利用遥测应变仪，测定了工件材料，进给量，切削深度，切削速度，齿轮齿数及螺旋角等对力矩的影响，并得出径节为8时的力矩公式。
This paper presents the information of the effect, measured with a tele-strain-meter, of work material, feed, cutting speed, depth of cut, number of teeth and helix Angle etc.
应用推荐