公司主要产品为：薄膜电阻、薄膜电容、薄膜衰减器、陶瓷垫块、陶瓷短路片、个性化薄膜电路等。
The major products are film resistors, film capacitors, film attenuators, ceramic blocks, ceramic short-circuit plates, individualized film circuits, etc.
载有电路的丝质薄膜附着在人体组织上后，就会自动溶解。
When the film containing the circuit is placed on biological tissue, it dissolves naturally.
附有电路的薄膜被安放到生物组织上，之后便自然溶解消失，附着的电路在毛细管吸附力的作用下则紧贴在了生物组织上。
When the film containing the circuit is placed on biological tissue, it dissolves naturally. What it leaves behind is the circuit, attached to the tissue by capillary forces and supported by it.
为了制造分立器件和集成电路，我们使用许多不同种类的薄膜。
To fabricate discrete devices and integrated circuits we use many different kinds of thin film.
为减少表面积有机电源电路位于压电薄膜扬声器下面。
The organic powersupply circuit is located under the piezo film speaker to reduce surface area.
本项研究目的是制作微型高精度铂薄膜热敏电阻器与集成电路配合，用于工业和科研中温度的精确测量。
The micro Pt-film thermal resistors of high precision are developed to match the ICs for precise temperature measurement in industry and scientific research.
这种测试仪在电子玻璃、半导体、集成电路、薄膜和纳米技术等领域都具有很大的应用前景。
This kind of tester has a enormous practical prospect in many fields, such as electronic glass, semiconductor, integrated circuit, thin films and technology of nanometer.
纳米硅薄膜具有独特的结构和许多优异的光电性能，可望应用于新型光电器件、大规模集成电路等领域。
Nanocrystalline silicon films have special structure and many excellent optoelectronic properties, and are supposed to be applied in optoelectronic devices and large scale integrated circuits.
利用光学和电子学结合的方法，建立了基于多光束光学传感器和光电检测电路的检测薄膜特性装置。
With a new combining method of optics and electronics, a device based on a multi-beam optical sensor and a photoelectric sensing circuit was setup.
印刷电路用基材。第2部分：规范。15号规范：规定易燃性的包铜软聚酰亚胺薄膜。
Base materials for printed circuits. part 2: specifications. specification no 15: flexible copper - clad polyimide film, of defined flammability.
提出了磁性薄膜电感器的改进型等效电路模型。
An improved equivalent circuit mode more suitable for micro inductor with magnet - IC films is proposed.
本文从基本的物理学原理入手，建立了纵纵式厚度伸缩薄膜压电变压器的物理模型以及等效电路。
In this article, form the physical principle, the model and the equivalent circuit of thickness extensional vibration mode of thin film transformer is built.
介绍了聚偏氟乙烯(PVDF)压电薄膜传感器的工作原理，并设计了相应的信号处理电路。
The work principle of the PVDF piezoelectric-film sensor was presented, and the design of its signal processing circuit was also discussed.
本公司是专业设计生产电子薄膜开关，触摸面板，软性电路等科技产品的专业公司。
Our company is specialized in design and production of high-tech products like electronic membrane switch, touch panel, and soft circuit etc.
对锑化铟-铟共晶薄膜磁阻元件的齿轮转速传感器电路进行了研究。
The gear velocity sensor made up of a InSn-In eutectic film magnetoresistor(MR) is studied.
印制电路用基材。第2部分：规范。第13号规范：通用级软覆铜聚酰亚胺薄膜，通用级。
Base materials for printed circuits. Part 2: Specifications. Specification No. 13: Flexible copper-clad polyimide film, general purpose grade.
本文介绍一种将微波低频段分布参数电路与超微细薄膜工艺结合的微型化、低噪声、高选择性的放大模组。
This module of distributed parameters used in the lower microwave band is skillfully combined with an ultra-fine thin-film technology.
一种用于阵列器件的晶体管电路包括并联电连接且设置在同一衬底上的多个薄膜晶体管。
A transistor circuit for an array device comprises a plurality of thin film transistors electrically connected in parallel and provided on a common substrate.
因此，可以容易地制造包含薄膜集成电路的半导体器件。
Therefore, a semiconductor device including a thin film integrated circuit can be manufactured easily.
集成电路有厚膜集成电路和薄膜集成电路。
The integrated circuit contain thick film integrated circuit and the thin film integrated circuits.
采用新型薄膜铂温度传感器设计了多点温度检测系统，使用正反馈型线性校正电路使输出电压与温度成线性关系，从而提高了检测系统的测量准确度。
The linearity correction circuit of positive feedback can make the output voltage be linear with the temperature, so the measurement accuracy of the system is improved.
有机薄膜晶体管（TFT）在数据存储、集成电路、传感器诸方面的广泛应用引起了人们极大的兴趣。
Thin film transistors (TFTs) using organic semiconductors as the active material are of interest for a number of applications such as data storage, integrated circuit and sensors.
一个适用于动态激活光电显示器的电路是由薄膜绝缘栅半导体器件构成的。
A circuit adapted to dynamically activate an electro-optical display device is constructed from a thin-film gate-insulated semiconductor device.
对于在用作集成电路的层间介电体时的改善性能，确定了低介材 料和包含该材料的薄膜及其制备方法。
Low dielectric materials and films comprising same have been identified for improved performance when used as interlevel dielectrics in integrated circuits as well as methods for making same.
为此，本发明包括步骤：将可脱模的薄膜或薄板上布置电路元件；
The method comprises the following steps: arranging a circuit component on a demouldability thin film or thin sheet;
本实用新型可保护薄膜不受污染，提高半导体集成电路生产过程中的照相平版印刷质量。
The utility model can protect the film from pollution and increases the printing quality of photolithography during the production of semiconductor integrated circuits.
作为VLS I互连线的金属薄膜的截面积越来越小，其承受的功率密度急剧增加，使得电迁移成为电路的主要失效模式之一。
Consequently, the metal interconnects of VLSI have smaller sectional area and carry increasing power density, which made the electromigration become one of the main latent damage modes.
提出一种基于集成电路超微细加工技术制造电磁干扰滤波器的薄膜集成制造新技术。
A new technique for fabricating EMIF in thin film IC based on superfine processing technique is proposed.
提出一种基于集成电路超微细加工技术制造电磁干扰滤波器的薄膜集成制造新技术。
A new technique for fabricating EMIF in thin film IC based on superfine processing technique is proposed.
应用推荐