薄板坯连铸连轧粗轧阶段的动态软化率接近于1。
Dynamic recrystallization fraction is close to 1 during rough rolling;
分析结果为薄板坯连铸连轧流程的优化提供了依据。
Results from the analysis provides basis for the system optimization of the thin slab casting and rolling process.
首先建立了两流薄板坯连铸连轧流程生产调度规则库。
Schedule rules for two-strand thin slab casting and rolling were established.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。
The process of thin slab continuous casting and direct rolling is different from the traditional one.
讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
薄板坯连铸连轧工艺热过程数字化正是这个软件的重要组成部分。
Therefore the digital model on heat transformation process of CSP is vitally component of this software.
介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。
This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.
组织超细化是导致薄板坯连铸连轧流程V微合金钢强度提高的主要原因。
The main reason for strength increase of V microalloyed steel is ultra-fine microstructure in TSCR process.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
介绍了具有代表性的研发趋势，如薄板坯连铸连轧、双辊薄带铸轧等新工艺。
Rather new manufacturing technologies such as thin slab casting rolling and twin roll casting technology were prospected.
利用薄板坯连铸连轧和薄带铸轧组合方案生产不锈钢可以更好地形成优势互补。
A suggestible solution is the combined production of thin slab continuous casting and continuous rolling together with strip casting, so that it will be complemental in superiority for both of them.
前言：薄板坯连铸连轧工艺有两个发展趋向：超薄带钢生产线和多品种生产线。
Thin slab casting and rolling technology has been developing toward two directions: ultra-thin strip production and multiple steel grades production.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
本钢薄板坯连铸连轧生产线在调试生产阶段，精轧机F3多次出现轧裂卡钢停产事故。
The Finishing mill F3 repeatedly occurs accidents of rolling crack and stopping steel plate in debugging production stage of thin slab concasting and conrolling production line in Bengang.
本文主要从中薄板坯连铸连轧的特点出发，对中薄板坯连铸连轧的产品品种进行了分析。
The strip products on medium thin slab casting and direct rolling line were analyzed based on the characteristics of the medium thin slab casting and direct rolling line.
文章阐述了包钢薄板坯连铸连轧加热车间加热炉砌筑的材料特点、结构特点及施工方法；
The paper presents the characteristics of materials, the structure ones and the method in constructing the heating furnace of the heating workshop of the CSP Plant of Baotou Steel Corp.
介绍了珠钢薄板坯连铸连轧生产线薄规格的生产情况，分析了影响薄规格生产的主要因素。
The status of thin strip production in thin slab casting and rolling process at Zhujiang steel is introduced, and main factors which affected the production is analyzed.
该调度系统可以较好地解决两流薄板坯连铸连轧流程的动态调度问题，进一步优化生产组织。
This system can solve the dynamic schedule problem of two-strand thin slab casting and rolling and optimize production management.
在薄板坯连铸连轧工艺的连铸坯及热轧板中均观察到了由相间沉淀方式形成的碳氮化物粒子列。
Particle arrays formed through the interphase precipitation are observed either in the slabs or in the hot strips.
在总结薄板坯连铸连轧生产取向硅钢技术优势的基础上，提出了该流程研究需要解决的技术难点。
Based on the potential advantages of producing grain oriented silicon steel by thin slab casting and rolling process, the key technical difficulties to be solved are brought forward.
薄板坯连铸连轧的产品特点是晶粒细小、强度高、钢质纯净、性能均匀，适宜生产各种高强度钢板。
The characteristics of products from CSP process are small grain, high strength, clean steel, even properties. The process is suitable to produce high strength steel plate.
通过比较薄板坯连铸连轧与传统热带卷生产工艺，对薄板坯连轧生产产品特点和工艺特。占、进行客观分析。
Comparing with the thin slab continuous casting continuous rolling and tradition rolling technology, their product character and technology character have been discussed.
从流程工序特点、热履历、抑制剂类型等方面进行对比，分析了薄板坯连铸连轧和传统板坯流程之间存在的差异性。
The difference between thin slab casting and rolling process and traditional processes is analyzed in terms of process characteristics, thermal history, and inhibitor type etc.
应根据薄板坯连铸连轧生产钢种的不同要求，对转炉—薄板连铸连轧生产工艺流程进行合理的优化，提高产品质量，扩大生产品种。
The production techniques on the Converter-CSP process should be optimized according to the different requirements for the various steel grades, therefore, to improve the p.
对唐钢薄板坯连铸连轧生产线与传统热轧生产线轧制工艺特点进行了对比，介绍了该生产线在带钢轧制中所采取的主要质量控制手段。
The thin slab continuous casting and rolling production line in Tang Steel is compared with the traditional process, the main quality control ways introduced.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
本文通过分析冷轧基料的一般要求、薄板坯连铸连轧工艺的设备配置、生产组织和物流衔接，提出了薄板坯连铸连轧工艺大规模生产冷轧基料的具体措施和建议。
The primary requirement of cold-rolling feeds, and the equipment design, production management and material flow of thin slab continuous casting and rolling, were investigated in the paper.
本文通过分析冷轧基料的一般要求、薄板坯连铸连轧工艺的设备配置、生产组织和物流衔接，提出了薄板坯连铸连轧工艺大规模生产冷轧基料的具体措施和建议。
The primary requirement of cold-rolling feeds, and the equipment design, production management and material flow of thin slab continuous casting and rolling, were investigated in the paper.
应用推荐