本文介绍了蓄电池充放电机理；
This article introduces the principle of battery charging and discharging .
如何能快速、安全、高效地对蓄电池充放电就显得尤为重要。
It is especially important that how can charge and discharge fast, safely and highly effective.
通过充放电曲线法研究无机添加剂对铅蓄电池充放电过程的影响。
The effect of inorganic additives on the charge and discharge processes in lead battery has been investigated by the charge and discharge curve method.
从硬件、软件方面完善系统对蓄电池充放电及其负载的管理和保护。
The system perfects the management and protection for the charge and discharge of storage battery also for the load and solar power supply.
上述系统主要的问题是缺乏最大功率跟踪控制和蓄电池充放电控制的统一考虑。
The main problem in the existing system is that maximum power control is separate from charging and discharging control.
介绍了一种新型蓄电池充放电装置的系统结构和工作原理，并对其控制方法和控制电路进行了研究。
The system configure and operation principle of the novel storage battery charged and discharged device were introduced, and its control method and circuit were gived.
介绍了一种基于TMS320LF2407DSP、智能PI控制的新型蓄电池充放电电源的设计方法。
The paper presents a new design method based on TMS320LF2407DSP and intelligent PI control for charging and discharging power supply.
蓄电池在国民生产各部门应用越来越广泛，如何能快速、安全、高效地各蓄电池充放电就变得更为重要。
With the more and more wildly use of storage battery in every field of nation, how to charge the battery quickly, safely and efficiently become very important.
为此本文针对实际需求，对PWM蓄电池充放电系统进行研究，设计了一种高效、高功率、节能的蓄电池充放电系统。
So, high frequency, high efficiency and small volume. A high-efficiency, high-power and energy-saving PWM storage battery charge and discharge system is presented in this paper.
基于双向变流器技术的蓄电池充放电装置具有充电和放电功能，同时实现了网侧电流正弦化及单位功率因数，因而减少了对电网的谐波和无功污染。
The device for battery charge or discharge based on the technology of bidirectional converter can be used in charging or discharging battery, and realize sine wave of ac and unity power factor.
所以一种使用方便，效果良好的充放电设备，对于蓄电池来讲时非常必要的。
Therefore one kind of easy to operate, the effect good charging and discharging equipment, says regarding the accumulator cell time is essential.
蓄电池和充电装置的充放电试验。
Charge and discharge operation test for battery and charge equipment.
结果表明：长期搁置后的蓄电池在使用前进行几次充放电循环，其有效容量和综合性能明显得到提高。
The experimental results showed that, before practical application, the initial capacity and comprehensive performance of stored battery can be obviously incr eased after some charge-discharge cycles.
由于铅酸蓄电池真实的SOC受许多因素如电池温度、充放电次数、电池老化等因素的影响，传统的SOC预测技术很难达到理想的效果。
Since the actual SOC of lead acid battery is influenced by many factors, such as temperature, cycle of discharge and aging of battery, it is difficult to obtain ideal results by traditional methods.
测试了锂离子蓄电池电镀锡阳极在不同充电（合金化）状态和不同充放电循环次数后的电化学阻抗谱。
The impedance spectrum of the electroplating tin anode for Li-ion batteries is measured at various states of charge(alloying)and after charge-discharge cycles.
本文就UPS中蓄电池的特性、电池配置以及电池的充放电管理等问题进行了探讨。
Characteristic of battery, configure of battery capability, charge and discharge management of battery for UPS will be discussed in this paper.
蓄电池和充电装置的充放电测验。
Charge and discharge operine test for playery and charge equipment.
一般来说，电动车用蓄电池多工作在深度充放电工作状态。
Generally speaking, the electric car works with the accumulator cell in the depth charging and discharging active status.
本文首先简要阐述了蓄电池在充放电过程中的电化学反应，同时介绍了晶闸管触发的条件。
This thesis briefly describes the battery charge and discharge processes in the electrochemical reaction, at the same time analyse a thyristor trigger conditions.
同时给出了整流滤波电路、辅助源电路、过压保护电路、蓄电池的充放电控制电路的电原理图及其工作原理。
Schematic circuits of rectifier and filter, assistant power, over voltage protection, and charge control for storage battery are suggested , their working principle are also discussed.
研究了不同阴极导电剂含量对锂离子蓄电池的充放电性能和阻抗性能的影响。
The influence of cathode conductive agent content to battery performance and AC impedance were investigated.
从蓄电池极板重要性和极板选材、薄厚等方面入手，对蓄电池组极板特点、组成和对充放电的影响等进行了简要分析。
Starting with the importance of battery plate, plate material selection and its thickness, it analyzes briefly the plate characteristics, composition and influence on charging and discharging.
结果表明铅布耐腐蚀性能较好，电池的充放电结果说明编织铅布可能用于卷绕式铅酸蓄电池。
The results show that the woven lead mesh could be used in the coiled lead acid battery.
并介绍了铅酸蓄电池的充放电控制电路。
And the introduction of lead-acid battery charge and discharge control circuit.
经过测试表明，航空蓄电池智能充放电系统监控单元在测量精度，以及准确度上都能满足实际应用的要求。
Tests showed that measurement precision and accuracy of the monitoring unit in aircraft battery smart charging and discharging system can meet the requirements of practical applications.
充放电装置的性能不仅影响着蓄电池的性能，使用寿命，而且对电网供电质量产生影响。
The performance of charging and discharging system affects not only the battery performance and life-span, but also the grid's power quality.
针对锂离子蓄电池在充放电过程中容易出现的过充、过放、过流、过温问题，设计了基于软硬件保护的锂离子蓄电池保护电路。
According to the problems in charging and discharging process of lithium-ion battery, a kind of protection circuit based on software and hardware was designed.
针对锂离子蓄电池在充放电过程中容易出现的过充、过放、过流、过温问题，设计了基于软硬件保护的锂离子蓄电池保护电路。
According to the problems in charging and discharging process of lithium-ion battery, a kind of protection circuit based on software and hardware was designed.
应用推荐