通过分析表明,节点核芯区具有很强的抗裂性能;
The analysis shows that the nodes in the core area has a strong anti-cracking performance;
借助条形光波导输出模式场研究条形光波导芯区的折射率变化。
The index variation of channel waveguides based on a mode field distribution is studied.
在另一个实施方式中,多个泵浦汽被耦合入增益产生光纤的芯区中。
In another embodiment, multiple pumps are coupled into the core of the gain-producing fiber.
该法适用于克尔型或非克尔型介质及芯区折射率非均匀的一般情形。
The method can be applied to non-Kerr type films as well as slab guide with graded-index.
给出了两种色散方程并研究了该波导各模式截止频率与芯区手征导纳的关系。
Two kinds of dispersion equations are given and the relation between the cutoff frequency and core chiral admittance is studied.
对保偏光纤的应力区与芯区的形状进行了观测,获得了它们的实际几何形状。
The real shapes of stress section and core were obtained by the measurement of the shape of stress section and core of campule PMOF.
根据实验结果对两种类型的节点提出了基于实验研究的节点核芯区承载力公式;
The core zone bearing capacity formulas of two types of joints based on the tests are brought forward respectively according to the tests.
试件的主要研究参数为梁纵向钢筋配筋率、梁塑性铰区配箍率以及节点核芯区体积配箍率。
The main parameters in tests are the percentages of longitudinal steel in beam, the percentages of stirrups in beam plastic zone and the volumetric percentages of stirrups in joint core.
理想的补偿方法是在芯区上下同时补偿,可减小模场偏移,并用该方法设计了偏振无关的1 6通道AWG。
The deflection can be improved by depositing the SiON film both above and below the waveguide. A polarization independent 16 channels AWG is theoretically designed using this method.
平面异型中节点以小核芯为控制单元,节点核芯区的受剪承载能力取决于小核芯区的混凝土强度、尺寸和配筋状况。
Controlled by the small core area, the anti-shear capacity of plane abnormal joints is rest with concrete strength, size and reinforcement of the small core area.
为了使梁的延性充分发挥,试验研究了梁内主筋在节点核芯区的不同的锚固方案以及装配式节点中梁内主筋的坡口焊焊接方法。
For the full development of beam ductility, different kinds of anchorage of beam reinforcements in the joint core and groove welded connction on longitudinal main beam b…
在工程区基岩被第四纪土、江水等覆盖的情况下,如何充分利用好获得的钻孔岩芯来分析断层的发育和活动性情况就显得非常重要。
It is very important to use a core to analyze the development and activity of faults in the case of bedrock which is covered by soil and water.
建立了多区变节点压水堆堆芯的数学物理模型。
Presented is a model for the multi region and variable node PWR core.
计算结果表明,多孔芯内液相含量的变化十分明显,为将多孔芯的汽液相变区处理为非饱和多孔区提供了充分依据。
The results indicated that the change of liquid content in the porous wick is very clear, proving that the change of liquid content in the area should be treated as an unsaturated layer.
从这一区域取样芯,以便检验裂纹表面。
A core was removed from this area so that the crack surfaces could be examined.
分析了光纤应力区结构对纤芯双折射大小和均匀性的影响,并将应力诱导双折射与模式理论计算结果进行了比较。
The effects of the stress domain structure of the fiber on stress birefringence and modal birefringence are investigated and compared .
滤泡髓质区上皮分化为网状上皮,边缘层和芯细胞。
The epithelial cells of the follicular medulla differentiated into the reticular epithelial cells, the marginal layer and the core cells.
由此结果对双折射与包层半径、纤芯半径、和应力区面积大小之间的关系进行了模拟。
The relations between birefringence and envelope radius, birefringence and core radius, birefringence and the area of stress are simulated.
针对钢芯铝绞线与铝包钢线混架区的特殊要求,用粉末冶金方法研制新型受电弓滑板,分析结构、烧结温度及成分对滑板性能的影响,并将新研制的滑板与厂方原用滑板进行对比分析。
The novel slider is developed by the means of powder metallurgy inorder to meet the requirements of the mixed field of aluminum twisting wire and steel-aluminum wire in electrification railoway.
液芯压下应该在结晶器出口处及二冷区扇形段开始部分进行,这样能减小铸坯的应变。
It was considered that the reduction should be performed in the mould exit and the upper strand segment to decrease the strand stress.
由于熔接塌陷区的作用,可以有效地激射起环芯光子晶体光纤的环芯模式。
Owing to the effects of the collapsed region, the ring modes in RPCF can be effectively activated.
用这套装置测量了国产RS-11型实芯碳电阻的极低温电阻-温度特性,结果表明,不同室温名义阻值的RS-11型碳电阻可作为不同极低温温区的电阻温度计使用。
The characteristics of the RS-11 type carbon resistor were measured using the above-mentioned cryostat. The results indicate that it can be used as a thermometer at ultra-low temperatures.
由于采用的N层掺稀土离子环芯光纤存在一个共同的中心包层区,因此极大提高了泵浦效率。
Because the adopted N layers of rare-earth ion-doped ring-core optical fibers exist in a common central cladding region, the pumping efficiency is greatly improved.
在铸坯凝固末端轻压下直接作用区域,两相区受到压缩,枝晶间富含溶质的液相被挤出,相对于铸坯向液芯方向流动。轻压下之后,铸坯中心区域由糊状区内被压缩的固相及残留的液相构成,中心区域偏析指数下降。
The simulation results show that mushy region is compressed and interdendritic solute-rich liquid flows toward the liquid core in the soft reduction action zone at the solidification end of the slab.
利用MSC MARC有限元仿真软件模拟了固定短芯棒拉拔时芯棒在变形区中不同位置时的管材拉拔过程,研究芯棒位置不同对管材内径尺寸精度影响的规律。
The article simulates the processes of tube drawing when the mandrel's position is different in the deform zone by using the finite element analysis software of MSC.
利用MSC MARC有限元仿真软件模拟了固定短芯棒拉拔时芯棒在变形区中不同位置时的管材拉拔过程,研究芯棒位置不同对管材内径尺寸精度影响的规律。
The article simulates the processes of tube drawing when the mandrel's position is different in the deform zone by using the finite element analysis software of MSC.
应用推荐