是强制性的一种变形，这个检查更复杂一些，它基于节点XPath表达式的返回值额外执行一次环境检查。
A variant of enforce, this check is more complex, as an additional context check is made based on the node returned from the XPath expression test.
内填混凝土有利于抑制柱腹板的屈曲变形，增加节点的承载力和刚度；
The infilled concrete benefit to restrain the buckling deformation of column webs, increase the strength and stiffness of the joint.
如果你在画布区域对节点进行变形的操作，那么在当前时间点会自动创建一个关键帧。
Keyframes are automatically added at the current time if you transform a node in the canvas area, given that the transformed property already has one or more keyframes in the timeline.
破坏时结构变形主要集中在节点上，节点钢板达到屈服强度，而木构件处于弹性工作状态；
The deformation of the structure will mainly concentrates at the joints when structural damage occurs. The timber members remain elastic while the joint steel plates yield.
计算了管柱在不同温度和压力工况下管柱轴力、各节点应力、位移和整个管柱总变形量。
The stress and displacement of each node and total deformation of pipe string are computed which at different temperatures and pressure work conditions.
本文用能量法和差分法对网架结构球节点(闭合的完全球壳)，进行了弹塑性变形分析和塑性极限分析。
In this paper, energy method and finite difference method are used to analyze the elastoplastic deformation of spherical nodes in the structure of networks.
结果建立了用于计算机辅助设计的镍钛记忆合金牵引器有限元模型，可以预测一定形状的牵引器在变形过程中(各时段)其本身结构中各节点、单元的受力、位移情况。
Results the finite element model of NTMA tractor for CAD was set up, which could predict the strength and displacement of every node and element of its own structure in the course of deforming.
先从梁柱节点受弯变形的机理入手，推导出钢框架梁柱焊接连接节点的初始刚度计算公式。
The formula calculating the initial stiffness of welded connection of steel frame was drawn according to bending deformation mechanism of joint zone of welded steel frame.
通过节点映射法实现各工艺路线的多道次挤压，不同的工艺路线对应的多道次挤压变形分布具有明显差异。
The different processing routes for equal round channel angular pressing process were conducted by using node mapping method in multi-pass pressing.
由于钢筋混凝土的存在和组合抗弯框架刚度高的特点，内置有型钢的组合节点的变形需求比起纯钢抗弯框架节点来要小得多。
Because of the existence of reinforced concrete and the high stiffness in a composite MRF, the deformation demand to the encased steel joints becomes less than in a pure steel MRF.
指出在罕遇水平地震作用下，板柱节点发生冲切破坏后，板柱结构的变形呈现弯曲型，并通过算例进行了验证。
It is pointed out and verified by an example that the deformation of flat plate structures is flexural after punching failure of slab-column connection happened under severe earthquakes.
扣件必须能确保节点不变形，是架子稳定的关键所在。
Fasteners must be able to ensure that node deformation, is the key to shelf stability.
为了简便有效地解决板壳结构的大变形问题，针对16节点相对自由度壳单元进行研究。
A 16 node shell element with relative degrees of freedom was developed for large deformation analysis of plate and shell structures.
本文对该体系的节点进行了单向拉伸情况下的应变变化情况及其整体变形、节点连接破坏情况性质的分析。
This paper analyses the load-deformation and the whole deformation of the system joint when it is in the single direction drag and the destructive quality of joint connection.
试验还表明，伸入节点区钢筋的粘结滑移对构件的变形及滞回特性有明显的影响。
The tests also show that the bond slippage of reinforcements in the joint area affects the deflection and the hysteresis loops of the specimens significantly.
同时以一组双稳定器钻具组合为例，分析钻具节点的位移变化图、弯矩图和应力分布图可得出钻具上的受力变形情况。
Moreover, taking the BHA with two stabilizers for example, based on analyzing the displacement, bending moment and stress on the nodes of BHA, the force and deformation of BHA are obtained.
结果表明，半刚性框架节点刚度的大小将直接影响结构的变形大小。
The result indicates that the value of structure deformation is influenced by the rigid value of the connection of the semi-rigid frame.
通过挠度测试，可以求出因节点域变形导致梁发生转动而产生的挠度值，进而可以得到梁柱夹角发生的改变量。
By the deflection test, the deflection produced by the deformation of joint field can be gained, accordingly, the change in the included Angle that the beam axis relative tot...
分析结果表明，在一定几何条件下，T形相贯节点可以看作刚接节点，但应考虑一定的节点柔性对整体结构变形的影响。
The results show that the T-type connection joint can be regarded as rigid under some circumstances but the effects of certain joint flexibility on the structure system should be taken into account.
该方法基于反射面天线的结构分析，利用变形反射面单元的节点位移信息得到变形后的反射面的网格模型。
Based on the structural analysis of the reflector antenna, a mesh model of the distorted reflector is obtained through the node displacement of elements of the distorted reflector.
采用最小二乘法来对变形后的天线有限元节点进行抛物面拟合。
And use the least squares technique to paraboloid fitting the finite element node on the distorted antenna.
研究扁梁框架节点的抗剪承载力、变形、耗能、延性和刚度退化等抗震性能。
And the aseismatic capacity of shear resistant strength, deform, energy dissipation, ductility and rigidity degeneration is also researched.
节点域的厚度直接影响着节点的刚度、强度和变形，从而影响框架的抗震性能。
The thickness of a panel zone has a direct influence on the stiffness, strength and deformation steel moment resisting frame, by which the aseismic performance of a frame is also affected.
荷载分配法的基本原理是根据节点的变形谐调条件列荷载分配系数方程。
The basic principle of load distribution method is that the equations of distribution coefficients of loads are set up according to the compatibility conditions of deformation at nodals.
整体结构中，节点处受到梁轴向温度内力的作用，其相同温度下的变形及转角明显小于孤立节点。
The whole structure, because of effect of the internal beam axial temperature force caused by axial restraint, its deformation is smaller than isolated joints, but its critical temperature is higher.
试验结果表明：实际工程中采用的很多端板连接大多属于半刚性连接，在荷载作用下，节点发生明显的转动变形。
The results show that many end-plate connections used in engineering structures are actually semirigid connections and that joint rotation occurs when loads are applied.
通过比较半刚性节点弯矩-转角的定义和节点的实际变形，指出了它们之间的矛盾性。
By comparing the definition of moment-rotation with the actual deformation of semi-rigid connections, it can be found out that there are some contradictions.
通过比较半刚性节点弯矩-转角的定义和节点的实际变形，指出了它们之间的矛盾性。
By comparing the definition of moment-rotation with the actual deformation of semi-rigid connections, it can be found out that there are some contradictions.
应用推荐