分类思想为具有较强客观规律问题的机器自动求解提供了思路。
Classified thought provide a automatically solved way to problem that have stronger objective regulation.
采用层次与关系相结合的装配模型，研究利用割集法自动求解装配与拆卸的并行序列问题。
With assembly model organized in hierarchical and relational mode, the problem of automatically generating assembly and disassembly sequence is explored using cut set theory.
您可以禁用此诊断通过设置'自动求解参数选择'诊断为'无'的诊断页的配置参数对话框。
You can disable this diagnostic by setting 'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics page of the configuration parameters dialog.
解决了当前无法系统利用计算机自动求解空间角度的困难，为工程实际中计算复杂的空间角度提供了方便。
By having used computer calculation and illustration of automatic graph plotter to test plenty of space angles, the scheme prov...
本文主要研究了齿轮连杆机构的可视化输入及结构分解、运动分析与力分析的自动求解与可视化运动仿真。
The visualized input of geared linkage mechanism, and visualization simulation on structural decomposition, kinematics and force analysis were mainly studied in this dissertation.
解决了当前无法系统利用计算机自动求解空间角度的困难，为工程实际中计算复杂的空间角度提供了方便。
By having used computer calculation and illustration of automatic graph plotter to test plenty of space angles, the scheme proved to have the fea...
如果要使“规划求解”根据目标单元格自动设定可变单元格，请单击“推测”。
If you want to have solver automatically propose the adjustable cells based on the target cell click guess.
使用了自动生成参数矩阵及连接矩阵的技术，并采用梯形法求解微分方程，可对一般性的输入信号进行迅速、准确的仿真输出。
The paper also describes the technique of forming parameter matrix and linking matrix automatically and solving the differential equations of all kinds of signals.
方法引入了金属铣削加工参数多目标优化模型，应用目标达到法对模型求解，又基于神经网络建立了金属铣削参数自动获取模型。
It introduces the multi-objected optimization model of the metal milling process parameters and applies the goal attainment method to ask for the explanation for the model.
采用实体单元模拟连接板件及螺钉，在连接板件钉孔部位建立接触状态，求解方法由ANSYS程序自动选择。
Members are modeled as solid elements, then plates and screws are glued. The equation resolution method is selected by ANSYS program automatically.
由于该方法采用显式差分方法和自动接触检索技术，故尤其适合于求解弹塑性、大变形和动力问题。
It is especially suitable for analyzing problems of nonlinear, large deformation and dynamic systems due to the explicit finite-difference scheme and the automatic contact detection skill.
将其推广到结构优化非线性准则方程组的迭代求解，可实现结构优化迭代求解的完全自动化。
Extending it to iterative solution of structural optimization nonlinear criterion equations, complete automatization of iterative seeking solution for structural optimization can be implemented.
建立了水电站厂内自动发电控制的数学模型，提出一种针对多喷嘴水斗式水轮机组的自动发电控制模型求解方法。
A mathematical model of automatic generation control for hydroelectric station is established, and a solution method to AGC mathematical model on multi-nozzle scoop-type turbines is proposed.
介绍了利用CAD、网格自动剖分和人工智能技术相结合进行航空薄壁结构有限元建模的问题求解框架。
Based on CAD, automatic mesh generation and AI reasoning techniques, the problem solving framework for finite element modeling (FEM) of aeronautical thin wall structures is introduced.
摘要建立了水电站厂内自动发电控制的数学模型，提出一种针对多喷嘴水斗式水轮机组的自动发电控制模型求解方法。
A mathematical model of automatic generation control for hydroelectric station is established, and a solution method to AGC mathematical model on multi-nozzle scoop-type turbines is proposed.
引入有限状态自动机模型和模拟退火算法来对该问题进行求解。
The model of finite state automaton and the algorithm of simulated annealing are introduced to solve this problem.
该方法能自动地、准确地确定求解域的未知界面，使其作为解的一部分。
This method can automatically and precisely determine unknown boundaries for solving domain and make them a part of equations 'solution.
面向代理的技术对于解决复杂动态系统的问题求解，实现集成化、智能化、自动化和网络化具有重要作用。
Agent oriented technology is important to address problem solving of complex dynamic systems, to achieve integration, intelligent, automation and network.
本文提出了一种用三次样条函数模拟双次标准加入法测量方程，直接求解离子浓度的自动算法。比较了三种不同边界条件下用模拟函数计算离子浓度的结果。
An automatic algorithm for directly Determining the ionic concentrations by simulating the measurement equations of the double standard addition using the cubic spline function, has been presented.
根据电站模块化图形自动建模的需要，对流体网络模型的求解问题进行了分析研究。
The analysis of the solution of fluid network model is carried out to match the need of graphically modular auto modelling for power plant simulation.
通过计算机程序设计自动实现模型数据的计算和求解，进而实现水资源恢复与管理的自动化。
The programmer can calculate and give results to model data automatically, thereby implementing the automatization for water resource recovery and management.
本文通过分别对非线性和线性反演方法的优缺点进行分析，提出了一种求解地震自动剩余静校正问题的两步法。
Analyzing the advantages and the shortcomings of linear and non-linear inversion methods, the paper presented a method in two steps for estimation of seismic automatic residual statics.
介绍了一维下料问题的下料方式，采用计算机自动生成相应的线性规划数学模型，给出了最优下料方案的求解方法。
The method of one dimensional blanking is introduced. The relevant linear programming model is generated by computers. One resolvable method of optimum blanking is put forward.
实例计算表明，即使测试过程中存在着较大的噪音，用该自动拟合模型求解的地层参数都接近实际的地层参数。
Illustration shows that though there is much noise in the test process, formation parameters calculated with this model are approximate to real ones.
通过建立简化模型，利用ADAMS软件自动生成数学模型，并用其强大的求解器求解，可以快速精确地计算凸轮的轮廓型线。
After set up simplified models, Automatic building mathematical models and excellent solver of ADAMS can help calculate an accurate outline of camshaft.
针对目前还不能从仪器的构造上自动消除折光影响，提出了一种求解大气折光改正系数的新思路。
In view of the status quo, the author takes the lead in putting forward a method that can evaluate the atmosphere vertical refraction.
本文在简要分析多信息自动闭塞系统速度 -间隔理论的基础上 ，建立了列车速度 -间隔控制方案的优化模型 ，介绍了模型的求解和实用算法的构造并给出了算例。
The essence of the affairs is the absence of corresponding theory and theoretical instructions. Based on the brief analyses of the theory on velocity interval control of automatic block system with m…
在程序中实现了LS - DYNA求解器的自动调用，大大提高了切边线的优化效率。
The program could automatically call LS-DYNA solver, which greatly increased the efficiency of the trimming line optimization.
在程序中实现了LS - DYNA求解器的自动调用，大大提高了切边线的优化效率。
The program could automatically call LS-DYNA solver, which greatly increased the efficiency of the trimming line optimization.
应用推荐