结合此技术，还提出了关断缓冲电容器能量的自动放电复位电路。
With the technique, a reset circuit of automatic discharge for energy captured in the turn-off snubber capacitor is also presented.
当德国阳光蓄电池电压降到低限时，报警通知用户，然后自动关机以防止德国阳光蓄电池深度放电。
When Germany sun battery voltage to the low limit, alarm notifies the user, and then automatically shut down to prevent the sun battery deep discharge in Germany.
参数检测和带载放电同时进行，单片机控制，可自动检测三相电压、电流、频率等参数。
Parameter test and load discharge can process at one time. It is controlled by CPU, and can automatically test three-phase voltage, current and power ETC.
通过自动调节指纹放电参数的方法，保证了指纹图像采集的质量，使系统的指纹识别率得到了进一步的保证。
The quality of fingerprint drawing is ensured by automatically adjusting the fingerprint discharge parameters, and the rate of fingerprint recognition is also guaranteed in the system.
单片机控制充电和放电状态，达到最佳的充电状态。自动检测和跟踪外部电池温度，内置温度补偿。
MCU control charge and discharge by the state, achieve the best charge state. Automatic detection and tracking external battery temperature, built-in temperature compensation.
利用该实验装置分别以手动控制模拟器和自动控制装置控制模拟器完成了空气放电过程。
On the testing equipment, air discharge process can be accomplished via hand control and automatic control manners.
在电流自动控制的同时，可对放电电流进行自动记录。
During the automatic control, the discharge current was automatically recorded.
介绍了直流电池放电自动化生产线的工作过程与控制特点，设计了一种基于PLC的直流电池放电自动化控制系统。
This paper introduces the working process and control features of the automatic production line of DC battery discharge, and designs an automatic control system of DC battery discharge based on PLC.
当电池放电量达到容量的80 %时，电路自动切断负载，防止电池过度放电，延长电池寿命，保证系统（或设备）在供电恢复正常后能正常运行。
It will switch off the load automatically when it discharged closing to 80% of their energy capacity, thus overwork of batteries can be avoided and lifetime may be extended.
主轴提升时，自动切断放电脉动功能。
When spindle is hoisted, the discharge pulse shall be cut off automatically.
放电率时自动重置申请安装电话时收取。
Discharge rate resets automatically upon application installation and when the phone is charged.
该充电器具有充电电流自动检测调整、自动消极化放电、充满自行关闭等优点。
This charger has the merits of automatically checking adjusting of electricity, automatically discharging to eliminate polarization, and automatically closing up, and et al.
本品可按照客户的要求定制。 本品适用于模拟负荷实验，设备放电，自动控制，变频器能耗制动等。
This product can be customized to special needs of customers and applicable to simultion load test, equipment dischaege, automated control and invertes energy loss brake.
以上研究表明，提出的局部放电识别特征集与分形图像压缩方法，能够有效地应用于局部放电模式自动识别，并获得了良好的识别效果。
The above research results show that the proposed PD recognition features set and FIC method, can be effectively used for PD pattern recognition and good recognition results are achieved.
系统还可以实时自动存储放电数据，查询放电参数的变化趋势，进行绝缘状态评估。
The history data can be stored automatically and real time. Moreover, the developing trend of discharge parameters can be queried and analyzed for the condition evaluation of insulation.
本文提出一种新的基于生成的CMOS运放电路拓扑结构自动综合方法和模拟电路的数据阵列描述方法。
We present a method for automatic synthesis of CMOS op-amp circuit and a data array description method of analog circuit.
恒流放电模式，参数设定后自动完成蓄电池组的容量测试或直流电源的带载能力检测。
It has discharge models of constant-current. After setting parameter, it can achieve capacity test to battery and load capacity test to DC power.
针对蓄电池组在充放电过程中参数自动检测这一工程实际问题，提出了一种基于CAN总线结构的对蓄电池组充放电参数进行自动检测的方案。
Automatic detection approach for charge and discharge parameters of storage battery set is presented in this paper based on CANbus structure for practical engineering applications.
本文介绍了一种蓄电池大电流放电自动控制装置。
An automatic constant current control device for large current discharge of storage battery was introduced.
该模块由高速前放电路，数字逻辑电路，强度调制器驱动电路，自动增益控制电路，以及强度调制器组成。
The module is made of high speed amplifier, AGC circuit, digital logical circuit, intensity modulator drive circuit, and intensity modulator.
利用1/4波长原理，当有高压干扰时，避雷器会自动短路（放电），系统正常工作。
Utilize the principle of wavelength 1/4, when there is high pressure to interfere, the lightning conductor will hold up automatically (discharge), The normal work of the system.
放电过程中可显示和自动保存各项曲线及数据，且断电自动保存数据；
It can display and save curve and data while discharging, also can save data when power be cut suddenly;
通过建立简易工艺数据库 ，该系统可适用于其它介质中的火花放电加工 ，有助于提高电火花气中放电加工自动化程度和开发智能化加工系统。
Through the establishment of the process database, the simulation system is applicable to electric discharge machining in other medium, it is a help to raise the automation of…
由于电子技术、信息技术的飞速开展，语音自动顺序播放电路已越来越成为人们生活里不可或缺的一局部。
As electronic technology, information technology, the rapid development of automatic speech circuit has increasingly become the order of play an indispensable part of peoples lives.
采用译码器构成单总线控制，设计了智能电压源组成气体放电管直流击穿电压自动测试系统。
By using some encoders to construct 1-wire control bus, an intelligent power source is designed and the automatic test system of arrester direct current spark-over voltage is built up.
我们的高速加工，放电成型技术以及自动化系统，能优化模具制造流程，提高模具加工精度和效率，保证模具制造的竞争力！
Our High-Speed Milling machine, EDM and Automated system that can optimize your manufacturing process, improve accuracy and efficiency of your mold to ensure you can get the market leader!
我们的高速加工，放电成型技术以及自动化系统，能优化模具制造流程，提高模具加工精度和效率，保证模具制造的竞争力！
Our High-Speed Milling machine, EDM and Automated system that can optimize your manufacturing process, improve accuracy and efficiency of your mold to ensure you can get the market leader!
应用推荐