膜计算是非传统计算领域之一。
Membrane computing is one of the research fields of unconventional computing.
本文采用膜优化算法优化DNA计算编码序列，提出了一类求解dna编码问题的新方法，扩展了膜计算的应用领域。
In this dissertation, Membrane optimization algorithm is applied in finding sequences suitable for reliable DNA computing in this thesis, a new method of DNA sequence design is pu.
最后研究了脉冲神经膜系统的计算有效性。
Finally, the computational efficiency of spiking neural P systems is investigated.
分子力学的研究发现了芘l B膜的可能结构，计算过程和结果可由分子图形程序同步显示。
Molecular mechanics investigation was applied to find the most probable configuration of pyrene LB film, and the calculation processes and results were shown by molecular graphics.
建立了精镗孔挤压液膜阻尼减振系统的动力学模型，运用MATLAB语言编程，对精镗孔挤压液膜阻尼减振系统进行了模拟计算分析。
Setting up a dynamics model of damping system of damper, and programming with the MATLAB language to calculate and analyze the damping system.
计算机自动控制保证了的镀膜过程的精确控制、可靠性和重复性，从而导致更高的生产一致性和膜层质量。
Process accuracy, reliability and repeatability are guaranteed by the automatic computer control system, resulting in much higher consistency of production and much better film quality.
因为膜构造内的张拉力呈较为复杂的空间散布，因此，所施加张拉力大小通常需求经过计算机找形来断定。
Because the tensile force in the membrane structure is more complex spatial distribution, therefore, the size of the tensile force is usually required to be determined by the computer.
摘要采用层流和紊流两种模型对水平管外垂下液膜的强制对流蒸发换热性能进行了数值计算。
Numerical analyses and experiments were carried out to obtain the evaporating heat transfer characteristics of falling film on horizontal heated single tube and tube arrays.
螺旋槽干气密封试验分析了干气密封螺旋槽几何参数对开启力、功耗、泄漏率和气膜刚度的影响，并通过理论计算对试验数据给予了验证。
The influences of the spiral groove parameters on the opening force, power loss, leakage rate and stiffness of gas film were investigated by the experimental test.
本文还对气垫带式输送机的牵引计算理论和气膜形成理论进行了实用设计研究。
In the thesis, the applied design based on traction calculation theory and gas-membrane theory is developed.
计算每个椎间隙处的硬膜囊横断面积。
Thecal sac cross-sectional area was calculated at each disc space.
运用修改过的有效介质理论及多层膜理论计算了这种表面的反射率谱，并将结果与实测值进行了比较。
The modified effective dielectric theory and multiple layer film theory are employed to calculate the reflection spectrum of this kind of surface.
在一实际煤粉火焰条件下，计算了可在单膜(SF)模型中直接应用的可比能量分配系数，并与传统SF模型的取用值进行了比较。
Under a practical pulverized coal flame condition, the comparable energy distribution coefficient was calculated and compared with the value used in the traditional single film (SF-CO) model.
同时，本文通过实测，修正了现行规范中用于计算沥青膜厚度的矿料表面积系数；
Through practical experiments, this paper correct the aggregate surface-area coefficient which is used to calculate asphalt membrane thickness in exiting specification.
最后作了环膜拉伸实验，实验结果和理论计算吻合较好。
Finally, the stretch experiments of ring membrane have conducted, its results is good agreement with theoretical calculation.
基于三个曲率模型，人们对闭合膜泡的形状已进行了大量的计算。
Based on three curvature models, the shape of the bubble membrane closure has been a great deal of calculation.
本文主要对EDI设备中的离子交换膜进行研究，并首次采用计算流体力学(CFD)软件对淡水室隔板的流场分布进行模拟。
In this paper, ion-exchange membrane used for EDI is studied, and flow field distribution modeling of dilute chamber with computational fluid dynamics (CFD) software is studied for the first time.
对空气隙膜蒸馏建立数学计算模型，并首次采用蒙特卡洛法对膜蒸馏数学模型求解。
A mathematics calculation model of air gap membrane distillation is established and calculated with Monte Carlo for the first time.
运用部分膜承载热弹流理论计算齿轮传动中的滑动摩擦力和滚动摩擦力。
Upon the theory of hot elastohydrodynamics about part film load bearing, the sliding and rolling friction forces in gear transmission device can be calculated.
理论计算蒸馏通量与实验结果吻合较好，表明采用的数学模拟及计算方法是可行的，对预测空气隙膜蒸馏通量进行有价值的探讨。
The theoretical calculation result fits well with the experiment result, and the mathematical method adopted is feasible and valuable for the flux prediction of the air gap membrane distillation.
计算结果表明，除非初始汽膜厚度或相对速度很大，否则计算高温颗粒在液面下运动的阻力时必须要考虑蒸发阻力。
The calculation results prove that unless the initial film thickness or the relative velocity is very large, the inner evaporation drag should be taken into account at high temperature conditions.
在膜式空气弹簧结构与计算模型的基础上，建立起膜式空气弹簧有效面积、有效面积的变化率及有效体积变化率的计算模型。
The calculation models of the effective area, the rate of change of the effective area and the rate of change of the effective volume are established for the diaphragm air spring.
建立了平板型和球面型行星夹具膜厚均匀性的计算模型。
Calculating models for flat and spherical planetary fixture were developed.
计算结果表明，膜的渗透性和冷却速率是影响细胞体积收缩的主要因素。
The results indicate membrane permeability and cooling rate are main factors that affect the cell shrinkage.
光镜观察后，用计算机图像分析系统测量其中膜显微结构成分的相对含量。
The microstructure component in tunica media of umbilical cord vein were measured by the computer image analysis system.
采用水力计算方法对中空纤维膜组件进行优化设计，发现膜的几何尺寸对产水量的影响很大。
In optimization design for hollow fiber membrane module by using hydraulic calculation, it was found that the geometric dimension has great effect on water yield.
计算结果同时也表明，对于表面覆盖有钝化膜的材料的数值模拟，建立合理的流动腐蚀动力学模型是数值计算方法应用成功与否的关键。
The modeled results also show that the ability to simulate corrosion of materials with surface passive film to some extent depends on their corrosion kinetics process tested by experiments.
提出一个利用多层膜小角X射线衍射谱衍射峰积分强度计算多层膜界面粗糙度的公式。
A simple formula for calculating the interfacial roughness of multilayer by using the small Angle X ray diffraction curves of the samples is given.
提出一个利用多层膜小角X射线衍射谱衍射峰积分强度计算多层膜界面粗糙度的公式。
A simple formula for calculating the interfacial roughness of multilayer by using the small Angle X ray diffraction curves of the samples is given.
应用推荐