这种联合原子近似已被用于生物膜的模拟。
Such united atom approximations have been used in simulations of biological membranes.
沟道应力的模拟方法则采用掩膜版边缘错位模型(mask - edge dislocation model)，应力测量方面采用拉曼光谱法。
Channel stress is simulated by using mask-edge dislocation model and actual stress is also measured by Raman spectroscopy.
这个模拟器证明当淡水和海水混合时，浓度会一直扩散，直到在液体中盐分完全均等。 如果在淡水和海水中放置一张选择膜，就可以控制扩散程度、获得潜在能量。
The simulator proves that when sweet and salt water join, the concentration will diffuse until the salinity is equal in the total fluid.
这些是用来模拟心脏细胞内部的化学反应以及他们的膜电压扩散。
These are used to simulate the internal chemical reactions of a cardiac cell and the diffusion of their membrane voltages.
其中大多数的结论直接来自于对大鼠膜性肾病（或称海曼肾炎）模型的研究，该动物模型很相似地模拟了人类该类疾病的临床和病理特征。
Most of these have come directly from studies carried out in the Heymann nephritis models of MN in rats, which closely simulate the clinical and pathologic features of the human disease.
举例来说，对于模拟鼓声，将有一个公式阐明敲击鼓面加添能量到二维的膜。
For example, to model the sound of a drum, there would be a formula for how striking the drumhead injects energy into a two dimensional membrane.
目前对内冷式刮膜薄膜蒸发器进行研究，一是以模拟研究为主，所得到的结论未经实验数据验证；
Recent research on the inner condensing wiped thin-film evaporator is mainly on the theoretical of the evaporating process, but unfortunately without certification by the experimental findings.
串并联流场的模拟和实验结果略有差异。该方法可用于质子交换膜燃料电池空气流场的优化设计。
There was a slight difference between the simulated performance of the parallel-series field design and the experimental results.
计算结果同时也表明，对于表面覆盖有钝化膜的材料的数值模拟，建立合理的流动腐蚀动力学模型是数值计算方法应用成功与否的关键。
The modeled results also show that the ability to simulate corrosion of materials with surface passive film to some extent depends on their corrosion kinetics process tested by experiments.
建立了精镗孔挤压液膜阻尼减振系统的动力学模型，运用MATLAB语言编程，对精镗孔挤压液膜阻尼减振系统进行了模拟计算分析。
Setting up a dynamics model of damping system of damper, and programming with the MATLAB language to calculate and analyze the damping system.
本论文对塑料吹膜过程做了系统的模拟。
In this thesis, the author simulated the process of blowing film systematically.
根据模拟结果并结合单晶硅材料和SOI结构的特点，设计出了矩形应力膜单晶硅soi高温压力传感器芯片。
According to the result of simulation and characteristic of monocrystalline silicon SOI structure, a novel high temperature SOI pressure sensor with a rectangle diaphragm was designed.
模拟结果很好地解释了具有反铁磁耦合的颗粒膜的实验事实。
These simulated results explain the experimental facts in the granular films with antiferromagnetic coupling well.
针对膜面培养方法可以方便地模拟红曲霉固态发酵过程，在实验获得红曲霉生长规律的前提下，研究了界面面积等条件对菌体生长和产物生成的影响。
According to the method of the interface culture, which can simulate the solid-fermentation of Monascus conveniently, the influence of different conditions such as interface area etc.
简述了爆破膜工作原理，水力过渡过程数值模拟，并介绍若干水电站应用实例。
The article discusses the working principle, numerical simulation on the hydraulic transients and applications of safety membranes in lieu of a surge chamber.
本文通过数值模拟的方法同时考虑了耦合传热和冷却流通道流动对气膜冷却的影响。
Numerical simulations were used to assess the effect of a conjugate heat transfer and internal coolant flow on film cooling.
冲击式水轮机水斗内非定常自由水膜的流动非常复杂，至今还没有足够精确的数值方法来模拟这种流动。
The unsteady free water sheet flow in the rotating bucket of a Pelton turbine is a very complex flow that cannot be accurately simulated for lack of a numerical method.
在室内模拟管线条件下，研究了杀菌剂对溶液和生物膜中srb灭菌作用的影响。
The effect of the bactericide on the solution and the bactericidal function of SRB in the biofilm, under conditions of indoor simulated pipelines, have been studied.
根据原位研究sei膜的需要，设计制作了带石英光学窗口的锂离子模拟电池。
To meet the needs of in-situ study of SEI film, the lithium ion simulate battery with optical quartz window was designed and made.
然后应用有限元法对气膜流场进行了有效的数值模拟计算及优化设计分析。
Then the application of finite element method has been carried on effective numerical value analog computation and the design analysing to the gas membrane flow field has been optimized.
采用分置式膜生物反应器（MBR）进行去除模拟废水中a-烯基磺酸钠（AOS）的实验。
Using split type membrane bioreactor ( MBR) can achieve effective removal of alpha olefin sulfonate (AOS)in simulant wastewater.
模拟结果表明，蒸发液膜呈现层流、湍流、波动流等复杂流动形态，湍流主要出现在刮膜器前的弓形波内。
Simulating results show that laminar, turbulent and wavy flow states are simultaneously subsisting in the evaporating liquid thin-film, and turbulence appears in the arched wave before wipers.
建立一种新模型，模拟超薄晶体膜生长过程。
A new model is proposed to simulate the whole process of ultra thin crystal film growth.
利用含有甘油三油酸酯的半透膜装置进行室内模拟实验和野外验证实验，旨在开发一种可以模拟生物过程的监测地下水的方法。
The paper presents the simulation experiment using semi-permeable sampling device(SPMD) with triolein in order to develop a method to monitor groundwater by simulating bio-accumulation process.
本文还通过分子动力学模拟考察了第i类杂化膜与第ii类杂化膜扩散性质的差别。
The differences of diffusion properties between class I and class II hybrid membranes were also investigated by molecular dynamics simulation.
理论计算蒸馏通量与实验结果吻合较好，表明采用的数学模拟及计算方法是可行的，对预测空气隙膜蒸馏通量进行有价值的探讨。
The theoretical calculation result fits well with the experiment result, and the mathematical method adopted is feasible and valuable for the flux prediction of the air gap membrane distillation.
模拟结果表明，进口流量和热负荷对降膜蒸发传热传质系数的影响较为显著。
The simulation results indicate that the effect of solution feed flow and heat flux has a high influence on heat and mass transfer coefficient of falling film evaporation.
利用错流流动模型及膜渗透的溶解-扩散机理，对螺旋卷式膜组件中天然气的分离过程进行了模拟计算。
The simulation is developed by using cross flow mathematical model and solution-diffusion model for natural gas separation process in spiral-wound membrane modul.
结果表明，己二酸酯类增塑剂相当容易从PVC食品保鲜膜中迁移到模拟油介质中。
The results show that adipates are quite easy to migrate from PVC thin films for food strapping to the stimulant oil.
本文主要对EDI设备中的离子交换膜进行研究，并首次采用计算流体力学(CFD)软件对淡水室隔板的流场分布进行模拟。
In this paper, ion-exchange membrane used for EDI is studied, and flow field distribution modeling of dilute chamber with computational fluid dynamics (CFD) software is studied for the first time.
应用推荐