主要有机械磨损和腐蚀磨损。
空心圆柱滚子轴承为应力腐蚀磨损失效。
The failure of the hollow cylinder roller bearing is stress corrosion wearing.
结果表明载荷与腐蚀磨损间仍然存在线性关系。
The linear relationship, with different slopes between corrosive wear and loads was confirmed.
填料密封腐蚀磨损是填料密封装置失效的主要原因。
Corrosion wear is the major reason of the packing seal destruction.
讨论了施镀温度对镀层成分、结构和抗腐蚀磨损行为的影响。
The dependence of plating composition, structure and the behaviour of corrosive wear resistance on plating temperature is also discussed.
牺牲阳极保护法可以有效地从抑制腐蚀的角度来减弱腐蚀磨损。
Sacrificial anodes protection can decrease the degree of corrosion wear effectively.
在伴有冲击的热强碱腐蚀磨损工况，高锰钢有过早失效的危险。
Under hot concentrated caustic impact-corrosion-abrasion conditions high Mn steel may be failure in earlier time.
锌铝合金涂层的磨损失效形式主要是粘着磨损和部分腐蚀磨损。
The wear failure form of the coating is agglutination abrasion and partly rust abrasion.
着重就重介质旋流器工况下氧化铝陶瓷衬里的腐蚀磨损做了探析。
Under the certain working of the dense medium cyclone, have done the discussion in corroding wear of the Al_2O_3 ceramics lining of dense medium cyclone emphatically.
文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
磨浆段螺旋套主要的失效形式为高应力磨料磨损，同时伴有腐蚀磨损。
The main failure form of pulping scroll cover is high stress grinding abrasion accompanying corrosive abrasion.
而增加含硅量后的低铬白口铸铁的腐蚀磨损耐磨性将比普通白口铸铁的高。
The corrosion wear resistance of low chromium white cast iron increases when the silicon content increases in it.
而增加含硅量后的低铬白口铸铁的腐蚀磨损耐磨性将比普通白口铸铁的高。
The effect of Si content on the corrosion wear resistance of low chromium white cast iron in the slurry with Cu2+ ion was studied by three-body corrosion wear test.
纳米管层的磨损机理主要为磨粒磨损、疲劳磨损、粘着磨损和氧化腐蚀磨损。
The wear mechanism of the nanotube layers involved abrasive wear, fatigue wear, adhesive wear and oxidative wear.
适当提高含硅量，有利于提高腐蚀磨损耐磨性，而且在酸性砂浆中效果较明显。
It is in favour of increasing the corrosion wear resistance when the silicon content is increased properly. Especially in the...
磨损有五种磨损形式：磨料磨损、冲蚀磨损、粘着磨损、疲劳磨损和腐蚀磨损。
There are five forms of wear and wear: abrasive wear, erosive wear, adhesive wear, fatigue wear and corrosive wear.
结果表明，当浆料介质中铜离子浓度增加时，低铬白口铸铁的腐蚀磨损耐磨性降低。
The results show that the corrosion wear resistance of low chromium white cast iron decreases with the increase of Cu2 + ion concentration in slurry.
从定义、分类、工业背景几个方面分析了由腐蚀磨损和冲刷腐蚀所造成的巨大损失。
The paper analyses the heavy losses made by erosion corrosion and corrosive wear based on the definition, classfication and industrial background.
对经不同温度下热处理的镀层进行了显微硬度和XRD分析和腐蚀磨损电化学行为研究。
The HV and XRD results show that the hardening of deposition was due to crystallization during heat-treatment at different temperatures.
当冲击功为2.0J时，改性高锰钢的冲击腐蚀磨损机理为挤出棱加工硬化造成的材料剥落。
When impact power is 2.0 J, the impact-corrosion and abrasion mechanism of the steel is characterized by spalling of extruded hardened edge.
以大型矿用球磨机研磨体为应用对象，在实验室条件下研究了硅、铜对低铬白口铸铁腐蚀磨损耐磨性的影响。
The effect of Si and Cu on the corrosive wears resistance of low chromium white cast iron for making grinding body of large grinding ball mill used in mine was studied in the conditions of laboratory.
因此，研究开发新型的耐冲击腐蚀磨损材料，提高工件在冲击、腐蚀和磨损交互作用下的服役寿命具有现实意义。
So, it is significant to develop the new impact-corrosion-wear resistant materials and increase the service life of the workpieces under the interaction of impact, corrosion and wear.
通过自制的冲击腐蚀磨损试验机，施加不同极化电位对高锰钢在矿浆介质中的冲击腐蚀磨损行为进行了试验研究。
Effect of polarization potential on the corrosion-wear behavior of high manganese steel in ore slurry was investigated by a self-made impact corrosive-wear tester.
在改进的MLD - 10型冲击腐蚀磨损试验机上，对不同成分的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
LCHA with several variations of composition were tested with a modified MLD-10 wear tester to investigate their behavior under corrosive impact abrasion.
在改进的MLD - 10型冲击腐蚀磨损试验机上，选择三种不同的冲击功，对以锰代镍的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
Under three different impact energy, LCHA with Mn in place of Ni were tested with a modified MLD-10 wear tester to investigate their behavior of corrosive impact abrasion.
司太立合金是一种能耐各种类型磨损和腐蚀以及高温氧化的硬质合金。
The stellite alloys are hard alloys which can resist various wear, corrosion and oxidation at high temperature.
摘要介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
Black tin coating was prepared by multi-arc ion plating technology and wear resistance corrosion resistance heat-proof property and absorption property of solar spectrum were also discussed.
针对PA6+60%GF的材料的磨损和腐蚀特性，我们的热流道系统选用了特殊的材料及特殊的浇口结构，以保证系统的使用寿命！
In terms of the PA6 + 60% GF wear and corrosion properties of material, we choose the special materials and special gate structure to prolong system longevity.
针对PA6+60%GF的材料的磨损和腐蚀特性，我们的热流道系统选用了特殊的材料及特殊的浇口结构，以保证系统的使用寿命！
In terms of the PA6 + 60% GF wear and corrosion properties of material, we choose the special materials and special gate structure to prolong system longevity.
应用推荐