最后讨论了提高单脉冲能量的方法。
In the end, the methods to increase the output pulse energy are discussed.
本文报导了单脉冲能量取样和数据处理的方法。
In this paper, a sampling method for single pulse energy and data processing are reported.
实现稳定、均匀的大体积放电，是获得高单脉冲能量的必经途径。
Stable and uniform large aperture discharge is the key technology to obtain high pulsed energy.
放电单脉冲能量的精确控制是实现微细电火花加工的关键技术之一。
The accurate control of single pulse discharge energy is one of key techniques in micro-EDM.
本文报道利用受激喇曼散射(SRS)稳定超短光脉冲能量的新颖方法。
In this paper, we report the method of stabilizing the energy of ultrashort light pulses by stimulated Raman scattering (SRS).
随着激光单脉冲能量输入的增加，焊接件的横向收缩变形和失稳变形变大。
With the single-pulse laser energy input increasing, the transverse shrinkage and buckling distortion are improved.
本文介绍了在激光加工中，采用单片机构成激光脉冲能量的测量与控制系统。
This paper presents the laser pulse energy measuring and controlling system using single chip computer in laser machining.
然而，这就要求使用高脉冲能量的激光器；与火花塞一样，需要大量的能量来引燃燃料。
However, it requires that lasers of high pulse energies are used; just as with spark plugs, a great deal of energy is needed to cause ignition of the fuel.
此外，逐步增大激光脉冲能量，会发现辐射的太赫兹波强度存在一个饱和特性。
The intensity of terahertz waves tends to saturate with the increase of laser pulse energy.
在色散补偿量相同的情况下，压缩效果随入射脉冲能量变化的规律符合理论估计。
When the dispersion compensation is the same, the relationship between the compression result and the input laser energy agrees with the theoretical analysis.
目前，对于多脉冲激光打孔，往往都是采用平行平面腔而脉冲能量采用平均分配法。
At present, plane parallel resonator is often used in multipulse laser drilling with average distribution of pulse energy.
把传输的信息编码成脉冲的振幅，因而使每个预先规定的脉冲能量值对应于一个信息。
The transmitted information is coded into the amplitude of the pulses so that each predetermined value of pulse energy is associated with a message.
研究了激光脉冲能量对等离子体电子温度的影响和等离子体电子温度的时间演化特性。
The influence of laser pulse energy on the electron temperature and the temporal evolution of electron temperature were studied.
如何大幅度提高每个脉冲能量？这是宽脉冲激光器不断更新、不断进步想要解决的问题。
How to enhance the energy of each pulse? This is a question that the width-pulse laser renewed unceasingly and progressing unceasingly wants to reply.
讨论了掺镱双包层光纤放大器输出脉冲能量随不同输入脉冲峰值功率和泵浦功率的关系。
The relations between the output pulse energy of the amplifier and the different input pulse peak power or pump power are also discussed.
实验研究了线-板式脉冲电晕放电烟气脱硫反应器的电极结构配置对脉冲能量利用的影响。
The influence of the electrode configuration of a wire-plate pulse corona discharge-based desulfurization reactor on pulsed energy utilization is investigated by tests.
研究了在激光脉冲能量和激光脉冲宽度一定时激光光斑面积对多光子电离离子产量的影响。
The laser facula area has some effects on the ion yield of multi photon ionization process.
临床研究表明：脉冲能量、脉冲宽度、辐射持续时间等激光参数直接影响到手术效果的好坏。
The clinic research indicates that the pulse energy, pulse width and duration time can influence the surgical effect directly.
研究了脉冲能量、反应温度和电极间距等工艺因素对镍磷合金粉体尺寸、形貌及收得率的影响。
The Effect of sparking energy, reaction temperature and electrode distance on the powder size, shape and yield was investigated.
管圆锥泡法创造了发光功率和单脉冲能量的新记录，并首次用条纹相机得到了时间分辨发射光谱。
New records for the luminescence power and energy emission from single events have been created, and the first time-resolved emission spectrum of sonol…
在电场长度一定下，线线间距为线板间距的0.6 ~1倍时，反应器对脉冲能量的利用达到最大。
At a given electric field intensity when the wire-wire spacing is 0.6-1 times that of the wire-plate, the utilization of pulsed energy by the reactor will reach a maximum value.
数值计算中考虑了两个上能级的自发辐射速率，给出了脉冲能量的空间演化及电离粒子在空间的分布。
The spontaneous relaxation of upper levels is considered in numerical solutions. The calculation results show the evolution of pulse energy and the distribution of ionization particle.
输出的光束质量较好，为准单模输出。该光纤放大器输出脉冲能量高，具有全光纤化、结构简单的特点。
A near diffraction limited beam was produced from the amplifier with quasi-single mode output... the results shows that the high pulse energy fiber laser has advantage of simple all fiber structure.
数值计算中考虑了两个上能级的自发辐射速率，给出了脉冲能量的空间演化及电离粒子在空间的分布。
The spontaneous relaxation of upper levels is considered in numerical solutions. The calculation results show the evolution of pulse energy and the distribution of ionization …
研制的脉冲能量控制焊接电源经试验验证，电源工作稳定，可靠，符合焊接工艺的要求，达到了设计要求。
Through many tests, Power supply is stable, safe and reliable, comply with the requirements of welding process and reached the design requirements.
一种叫蒸气脉冲电凝(VPC)的特殊技术，其生产速度更快，更均匀的即时与控制的方式提供脉冲能量的结果。
Unique technology called Vapor pulse Coagulation (VPC), which produces faster, more uniform results with pulsed energy instantly delivered in a controlled manner.
分析了在激光模拟单粒子效应试验中激光波长、束斑大小、脉冲能量、脉冲宽度等脉冲激光参数对阈值能量的影响。
Effects of pulsed laser parameters such as laser wavelength, beam spot size, pulse energy and pulse duration on threshold energy in laser simulating Single Event Effect testing are analyzed.
利用原子力显微镜和扫描电镜观察了材料的烧蚀形貌，测量了破坏阈值与脉冲宽度、烧蚀深度与脉冲能量的依赖关系。
The damage morphology, and threshold fluence as a function of pulse duration and the dependence of ablation depths on the pulse fluences are measured.
基于三种细导线目标数值计算散射场的仿真实验表明，相比于传统E脉冲能量识别数，本文方法取得了很好的识别效果。
Simulations using numerically calculated scattering response based on three thin wire target demonstrate that the method proposed in this paper is surprier to the traditional E-pulse.
基于三种细导线目标数值计算散射场的仿真实验表明，相比于传统E脉冲能量识别数，本文方法取得了很好的识别效果。
Simulations using numerically calculated scattering response based on three thin wire target demonstrate that the method proposed in this paper is surprier to the traditional E-pulse.
应用推荐