他在1941年制成了一台磁通脉冲传感器。
脉冲传感器选择韦根传感器，是一种零功耗磁敏传感器。
The Wiegand sensor which is a kind of zero power sensor is choosed as theimpulse sensor.
它通过传输由高技术传感器收集的电脉冲而起作用。
It works by sending a series of electrical impulses which are picked up by hi-tech sensors.
这种脉冲可以穿行数千公里，这意味着它们经常被不止一个ATD网传感器检测到。
Such pulses can travel thousands of kilometres, which means they are frequently picked up by more than one of ATDnet's sensors.
接着这种传感器传递达10伏特的电脉冲，基本能掩盖疼痛信号。
It then delivers an electric pulse up to 10 volts which essentially masks pain signals.
触发叶轮随发动机转速而旋转，使得转速传感器或拾波线圈产生与发动机转速和活塞位置相对应的触发电压脉冲。
The trigger wheel rotates with engine RPMs and causes the speed sensor, or pickup oil, to produce triggering voltage pulses that correspond to engine speed and piston position.
电子控制单元使电流通过初级绕组直到感知到一个从转速传感器或拾波线圈产生的触发电压脉冲。
The electronic control unit allows current to flow through the ignition coil primary winding until it senses a triggering voltage pulse from the speed sensor, or pickup coil.
本文设计了一种恒功率脉冲调宽式力平衡式传感器，并从理论上对它作了分析。
In this paper, a kind of sensor with constant power pulse width modulation and force balance is described and analysed theoretically.
同时利用霍尔传感器将电机速度转换成脉冲频率反馈到单片机中，实现转速闭环控制，达到转速检测目的。
At the same time using Holzer sensors will be converted into pulse frequency motor speed feedback to the MCU, realize the speed closed-loop control, to achieve speed detection.
将等离子云传感器应用于脉冲等离子弧焊穿孔熔池小孔状态检测，并对检测信号的波形特征做了深入研究。
The plasma cloud charge sensor was applied to detect the status of keyhole molten pool during pulsed plasma arc welding, furthermore, the detected signals were studied.
流量传感器将叶轮转动信号转换成电脉信号，计算机通过记录脉冲数实现对流过的高温水进行累计测量；
The flow sensor made the leaf wheel change the pulse signal, the computer use the pulse number to record the heat water quantity.
建立了基于脉冲表面波声场的声发射传感器标定系统，对商用和自制的几种声发射传感器进行了标定。
The ae sensor calibration system based on pulsed surface wave sound field was built several commercial and self-made ae sensors had been calibrated on it.
外壳可同时终了轴和通轴固定件和加工的普遍容纳所有传感器模块，无论所需的脉冲计数。
The enclosure accommodates both end-of-shaft and thru-shaft mountings and is universally machined to accommodate all sensor modules, regardless of the desired pulse count.
同时利用CMOS多谐振荡电路产生窄脉冲电流序列对前面处理过的非晶带进行激励，制作成灵敏度高、稳定性好、功耗低的弱磁场传感器。
A sensitive, stable and low power consumption magnetic sensor is constructed using a CMOS multivibrator circuit, in which a sharp pulse train current is applied to the treated amorphous ribbon.
根据速度传感器的型号，每一个轮齿产生的脉冲数可以是2- 16，并通过实时处理的特征，确保这一脉冲从第一个轮齿开始旋转时就能感应到。
Depending on the sensor model the number of pulses resulting from each gear tooth may be 2 to 16, with the nature of the realtime processing ensuring that this occurs from the first tooth sensed.
板栗由皮带输送到摄像区域，利用红外传感器的触发脉冲控制图像采集卡动态采集板栗图像。
CCD camera dynamically grabbed image of chestnut conveyed by belt through frame grabber, which triggered by infrared sensor.
曲柄参考点脉冲信号由一个变磁阻传感器产生，它从发动机飞轮上的突起感受信号。
The crank reference pulse originates from a variable reluctant pickup which senses a projection on the engine's flywheel.
连续的高压脉冲，接近或者超过传感器的最大额定压力，也会缩短传感器的寿命。
Continuous high pressure pulse, close to or more than the maximum rated pressure sensor, also will shorten the life of the sensor.
详细介绍霍尔速度传感器，里程计数脉冲的产生，步进电机的驱动和BL 2115集成电路在电子式车速里程表中的应用。
The Hall speed transducer, the generation of the mileage pulse, the driving of step motor and the application of integrated circuit of BL2115 in speedometer are introduced in detail.
调理电路将磁电式传感器产生的齿轮旋转逐齿信号调为矩形脉冲。
Pulse signal of gear wheel rotating generated by magnetoelectricity sensor was adjusted into rectangular pulse by adjusting circuit.
介绍了一种脉冲供电传感器电路，可延长电池寿命至几年。
A type of pulse supplied sensor circuit which can extend the battery lifetime is presented.
在传感器上施加电磁脉冲，通过时间域反射计记录反射数据。
Electromagnetic pulses are applied to the sensor and the reflections are recorded with a time domain reflectometer.
建立了基于脉冲表面波声场的声发射传感器标定系统，对商用和自制的几种声发射传感器进行了标定。
The AE sensor calibration system based on pulsed surface wave sound field was built, several commercial and self-made AE sensors had been calibrated on it.
讨论了输出正交正弦波的光栅尺（又称光栅线位移传感器）在位移测量中的脉冲细分原理。
The principle of pulse fine division in measurement of displacement by using grating scale (so called Grating line displacement transducer) with right-angled sinewave is discussed.
由于该传感器直接将地震的机械信号以脉冲数字信号输出，避免了器件精度不同对传感器输出数据质量的影响，简化了组装工艺。
Because of the direct digital pulses output of grating sensor, the influence of different precisions of the devices to data quality is avoided, and the assemblage technology is simplified.
本文提出了用任意时限脉冲作激励源的一种动态校准方法，用于校准动压传感器的频响特性。
In this paper, a dynamic calibration method using a finite duration impulse excitation source is presented, which can be used to calibrate the frequency response of high-pressure transducers (HPT).
地磁传感器测量的数据不仅用于解算弹体飞行姿态，同时可通过计算给出点火脉冲发动机选择的方向基准。
The data measured by magnetic sensor can be used in calculating the flight attitude of the projectile and giving the direction benchmark of firing pulse jet.
叙述了一种以脉冲调制的红外光束为信号光源的焊缝跟踪传感器。
The paper describes a seam tracking sensor with a signal source of modulated infrared beam.
叙述了一种以脉冲调制的红外光束为信号光源的焊缝跟踪传感器。
The paper describes a seam tracking sensor with a signal source of modulated infrared beam.
应用推荐