能谱分析表明局部区域晶界含碳量约达50%。
And energy spectrum analysis indicates that carbon was reach 50% in some grain boundary.
银杏吸收根营养元素吸收及分配规律的能谱分析。
Studies of energy spectrum analysis on the absorption and distributive laws of nutrient elements in sucking roots of ginkgo biloba l.
对种植体骨界面作扫描电镜观察、X线能谱分析。
The interface between implant and bone were observed with scanning electron microscope (SEM) and X ray energy spectrum analysis (EDAX).
用TEM组织观察和能谱分析发现奥氏体中有锰元素的偏聚；
The segregation of element Mn was discovered by means of TEM observation and energy spectrum analysis.
对汽轮机断裂叶片进行了金相组织观察、断口扫描及能谱分析。
Metallographic observation, fracture scanning and energy dispersion spectrum analysis on the fractured turbine blade were carried out.
用滑动对数能谱分析和人机交互正反演方法计算出磁性基底深度。
Using moving average of logarithmic energy and men-computer mutual system, the depth of magnetic basement was inversed.
开发的软件具有原始数据采集、能谱分析、含量与储量计算等功能。
The software can preform primitive data collection, spectral analysis, content and reserve calculation and plotting.
采用金相检验、扫描电镜观察和能谱分析等方法对断坯进行了分析。
The facture failure of the slab was analyzed by means of metallographic microscope, SEM and EDS.
利用扫描电镜考察摇臂试验品的断口形貌，对个别区域进行能谱分析。
Scanning electronic microscope is used to check the fracture form of swing arm trier and energy spectral analysis is done in special area.
对该铜管进行了化学成分、力学性能以及扫描电镜和能谱分析等试验。
The failure copper pipe was inspected by chemical composition analysis, mechanical performance testing, SEM and Energy spectroscopy.
对刀片破损断口进行能谱分析，证实刀片与粘屑相互粘结有对方材料元素。
According to the EDX analysis on the break area of blade, it's found that the bits and blade glue the other side material elements of each.
本文还运用扫描电镜，能谱分析等手段研究了渗透性水泥胶结物和孔隙结构特性。
This paper also used the SEM and energy spectrum analysis to study the peculiarity of the permeable cement adglutinate and the pore structure.
并借助能谱分析和金相观察对上述三层的传质过程和形成机理进行了分析和探讨。
Relying on energy spectrum analysis and metallographic examination, we have studied and analyzed the spreading the quality course and forming mechanism of the above every layer.
应用金相显微镜和扫描电镜以及X射线能谱分析了K6合金铸造叶片的质量问题。
The defective cast blades blanks of K6 alloy are examined by means of optical, Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spetrum (EDS).
对预留的样本进行扫描电镜观察及能谱分析，以判断金属与陶瓷的结合界面状态。
Scanning electron microscope and energy spectrum analysis was used to observe the interface of the specimen which was selected.
应用SEM电镜分析和能谱分析等方法分析了热浸扩散渗铝层的成分、组织和形貌。
Using SEM with EDX analysis, the composition, microstructure and morphologies of the surface layer were analyzed.
通过扫描电镜、能谱分析等方法，对铸铁件和铸钢件表面渗铬层的组织进行了研究。
This paper researched the microstructure characters on the cast-chromized layer of the iron casting and the steel casting by SEM and energy spectrum.
表面光电子能谱分析是固体木材及纤维表面化学组成分析最有效及最灵敏的工具之一。
Xray photoelectron spectroscopy (XPS) is one of the most powerful and useful tool for chemical composition analysis on both wood and fiber surfaces.
通过X射线光电子能谱分析和接触角测定，研究了处理前后泡沫橡胶表面性质的变化。
The property changes of foam rubber surface before and after the treatment were studied by XPS and contact Angle measurement.
通过电镜、能谱分析、金相分析等手段对H13钢制风机叶轮模坯开裂进行了综合分析。
Cracking of H13 steel die blank for fan impellers was analyzed by means of SEM, EDS and metallographic microscope.
采用扫描电镜断口分析、微区能谱分析等方法研究了261汽轮机中汽缸大型铸件开裂问题。
In this paper a macro-cracking in the medium casing which is a heavy section casting of 261 turbogenerator was investigated by SEM, EDAX and others.
借助于光学显微镜、扫描电镜和EDS能谱分析等方法研究了熔凝层显微组织和溶质浓度分布。
The microstructure and solute concentration distribution of solidified layers is studied by means of optical microscope, SEM and EDS analysis methods.
绘制了氧化动力学曲线，用带能谱分析的扫描电镜观察了涂层的表面氧化形貌和横截面组织形貌。
The oxidation kinetics curve was drawn. The surface morphology and cross section micrograph of the Al-Si coating were studied by using SEM.
利用SEM和能谱分析，研究了其微观形貌的变化，并对球磨粉末的晶粒细化机理进行了一定的研究。
The morphology of the powders was studied by SEM and EDS, on which the discussion of grain refinement mechanisms is based.
测定了浮法玻璃上表面与下表面的吸附水量，借助电子能谱分析了浮法玻璃表面不饱和“基团”的分布。
Amount of the adsorbed water of upper and lower surfaces of float glass is measured, Distribution of the unsaturated group on both surfaces is analyzed by means of XPS.
主要通过灰污热流的动态变化、SEM，XRD和能谱分析揭示炉内沾污结渣特性和灰污热流变化规律。
The change rule of resultant flux and the fouling and slagging characteristics in boiler were discussed with dynamic changes of resultant flux, SEM, XRD and element analysis.
通过扫描电子显微镜对热镀锌钢板镀层表面麻点缺陷的表面和断面形貌进行了观察，并对其进行了能谱分析。
The surface and cross-section of the pock flaws which appeared on the hot-dip galvanized coating were observed and analyzed by using SEM and energy spectroscopy.
利用扫描电子显微镜和能谱分析(EDS)对焊缝断口进行成分分析，研究焊接接头的焊接缺陷及断裂机制。
Weld fracture components were analysed by SEM and EDS, joint defect and fracture mechanism were also researched.
利用扫描电子显微镜和能谱分析(EDS)对焊缝断口进行成分分析，研究焊接接头的焊接缺陷及断裂机制。
Weld fracture components were analysed by SEM and EDS, joint defect and fracture mechanism were also researched.
应用推荐