对工业装置本体连续聚合过程进行了分析。
Analysis of industrial styrene bulk polymerization processes was carried out.
通过透射电镜以及红外测试等对聚合过程进行了跟踪研究。
The polymerization process is tracked by use of TEM transparent Electronic Microscope and IR spectrometry.
在此基础上，提出丙烯腈水相连续(共)聚合过程的控制方案。
At the above, a control plan is put for-ward to such process.
WSDL的内容并不是服务的含义，服务集成的聚合过程也不是服务的含义。
While the content of WSDL is not the meaning of the service, the aggregated process of service integration is also not the meaning of the service.
本文介绍在高压聚乙烯生产线上对其聚合过程进行优化研究的工作。
This paper studies the optimization of polyreaction process on polyethylene Production line.
采用机理建模方法，研究了丙烯在环管反应器中的液相本体聚合过程。
The liquid phase bulk propylene polymerization in loop reactor was simulated based on the polymerization mechanism.
紫胶硬树脂由软树脂多聚而成，该聚合过程以树脂的羟基参与反应为特征。
The hard resin was formed by polymerization of the soft resin in the presence of hydroxyl groups.
此模型为氯乙烯悬浮聚合过程的动态特性分析、过程预测控制和优化提供了基础条件。
The model provides the basis for dynamic behavior analysis, process predictive control and optimization of VCM suspension polymerization.
用透射电子显微镜（TEM）和扫描电子显微镜（SEM）观察了硅酸溶胶的聚合过程。
The process of polymerization of silicic acid was observed by transmission electron microscope (TEM) and scanning electron microscope (SEM).
对梯度表面能材料上的液滴聚合进行了可视化实验，分析了聚合过程对液滴运动的影响。
Researching on the coalescence of droplets on the gradient surface energy by visualizing experiment, and the effect of droplets movement by the coalescence process would be analyzed.
介绍了聚合过程的模拟、先进控制，配方切换管理，实时优化控制和计划调度的软件技术。
The polymerization process simulation, advanced process control, recipe transaction management, real time optimization and planning technologies are described separately.
聚合过程控制为聚合活性与聚合物门尼粘度的控制，即聚合过程生产能力与产品质量的控制。
Polymerization control is the control of polymerization activity and polymer Mooney viscosity, namely the production capacity and product quality control during polymerization.
以丙烯聚合过程为研究对象，给出了构建丙烯聚合过程非正常工况自愈调控系统知识库的方法。
By taking the propylene polymerization process as the research object, a method of constructing the knowledge base of the abnormal situation self-recovery system was presented.
目前，在磁场环境中探讨苯胺的聚合过程，研究磁场对PANI性能的影响，已成为研究的热点。
Currently, it has attracted much that the an polymerized in the presence of magneticfield and the effects of magnetic field on the properties of PANI were discussed.
结果表明，单酚在酶促下确实会发生聚合，且不同的单酚表现出不同的聚合过程及不同的聚合速度。
The result indicated that phenol did polymerize. And different phenols had different procedure and speed of polymerization.
该方法能应用于各个层次的兵力聚合过程，以辅助各个指挥层次的军事决策，提高决策的速度及效率。
This method can be used in force aggregation at all command levels, and it can greatly improve the decision efficiency.
单体两段滴加法中，当预加单体量小于30%时，聚合过程稳定，氨化剪切后超微胶乳透光率约65%；
When the pre-adding fraction of monomer was less than 30%, the polymerization could be carried out stably and a final micro-latex with 65% transparency was obtained.
采用凝胶色谱技术研究乙醇—水溶液中硅酸聚合过程、聚合物结构。以及聚合物结构对溶胶涂膜性能的影响。
The process of silicate anions polymerization and the structure of silicate polymers were studied by gel permeation chromatography (GPC).
比较了不同链转移剂的作用效果；研究了2-巯基乙醇作为链转移剂对聚合过程和共聚物相对分子质量的影响。
Effects of as 2 - mercaptoethanol chain transfer agent to polymerization and the relative molecular weight of copolymer were studied.
分散剂体系对聚合过程体系的稳定性、所形成树脂的颗粒粒径及粒径分布、颗粒空隙率和表观密度等有重要作用。
Dispersant system has important effect on stability of polymerization system, the diameter and diameter distribution, porosity and apparent bulk density of resin particles, etc.
当考虑到请求程序没有兴趣、关系或责任了解服务聚合的过程时，这种说法是完全成立的。
This is especially true when considering that the requesters have no interest, relationship, or responsibility to understand the process of service aggregation.
正如在太阳上所进行的反应一样，第二阶段连锁反应将氢原子聚合成较重的氦原子并在这一过程中释放出巨大的能量。
Just as in the sun, the chain reaction in the second stage fuses the hydrogen atoms into heavier helium atoms and releases vast amounts of energy in the process.
这一部分将介绍创建包含聚合逻辑的中介组件的过程。
This section describes the process of creating a mediation component that includes aggregation logic.
数据的表示和聚合在过程定义之外处理，通过一般的服务调用来实现。
The presentation and aggregation of data is handled outside of the process definition, and implemented through generic service calls.
材料的合成过程是这样：首先，他使高温碳氢混合气体和铁催化剂相互作用产生密集的碳纳米管群，然后再用聚合物充填碳纳米管间的空隙。
He created this composite by growing a forest of nanotubes using hot hydrocarbon gases and an iron catalyst, and then filling the space between the tubes with the polymer.
这一层的服务提供通过聚合集成组件支持粗粒度业务功能从而执行代理过程的能力。
This layer of services provides the ability to broker process execution through the aggregation of integration components to support coarse-grained business functions.
设计过程也越来越多的被用于聚合设计师和其他领域的人员，一起工作解决宏大的议题。
Design processes are increasingly being used as a way to enable groups of designers and non-designers to work together to tackle big issues.
请求程序只需要遵循服务请求和响应的详细语义模板，就可以部署服务，而无需处理服务聚合的组合过程。
Requesters can just follow the detailed semantic template of service request and response to deploy the services without the needs to handle the composite processes of service aggregation.
您还可以详细了解创建中介流的过程，包括聚合逻辑。
You also get details about the process of creating a mediation flow, including aggregation logic.
您还可以详细了解创建中介流的过程，包括聚合逻辑。
You also get details about the process of creating a mediation flow, including aggregation logic.
应用推荐