一般地，所述聚合物颗粒包括尼龙颗粒，最优选地为尼龙切片的形式。
Typically, the polymeric particles comprise particles of nylon, most preferably in the form of nylon chips.
因此，更小的聚合物颗粒大小使能可以使用与它的各种各样过滤的材料。
Thus, a smaller polymer particle size enables a wider range of filtering materials that can be used with it.
干燥湿的聚合物颗粒并把溶剂回收是在塑料工业中有广泛用途的一种操作。
The drying of wet polymer particles with solvent recovery is an operation which may see wide use in the plastics industry.
重点介绍了减阻聚合物悬浮液的制备：聚合物颗粒的制备和悬浮基液的选择。
This paper discussed the preparation of drag reducing polymer and focused on drag reducing polymer suspension: including the preparation of polymer particles and the choice of suspending material.
铝合金的静电喷涂处理是一道能够产生一种耐用型的、高保护度的高分子聚合物颗粒的工序。
Powder coating aluminium is a process that creates a durable, protective finish of polymer granules.
因此，在非稳态操作时，要实现聚合物颗粒粒径的控制，对第一类变量的控制应早于第二类变量。
Therefore, in order to advance the control time of polymer particle size, we should control the two proceeding parameters earlier than the three latter parameters during unsteady state operation.
本文简要介绍并比较了迄今所出现的主要聚合物颗粒增长模型，并指出如何用模型来描述聚合物颗粒增长情况。
In this paper, the main models on the particle growth are introduced and compared each other, while describing the mechanism of the polymer particle growth via model.
紫外线所照射到的区域，该区域的聚合物便会凝固，并将陶浆中的颗粒粘合在一起。
Wherever the light falls on the polymer it causes it to solidify, binding the particles in the slurry together.
装甲控股公司研制的剪切增稠流体是一种含有二氧化硅纳米颗粒的液体聚合物，BAE对其细节闪烁其词，不愿过多透露。
The fluid that Armour Holdings worked on is a liquid polymer containing nano-engineered particles of silica, though BAE is coy about the details of what it is using.
虽然英国宇航公司不肯明说它所使用液体的细节，但装甲控股公司曾经研制的液体是一种含有二氧化硅纳米颗粒的液态聚合物。
The fluid that Armour Holdings developed is a liquid polymer containing nano-engineered particles of silica, though BAE is coy about the details of what it is using.
为达到这个目的，Hamad -Schifferli给DNA附加上了黄金纳米颗粒，他们期盼这种大型纳米分子dna (NP—DNA)聚合物能够阻止转化。
To accomplish this, Hamad-Schifferli attached DNA to gold nanoparticles, expecting that the large nanoparticle-DNA (NP-DNA) aggregates would block translation.
水中粘土颗粒和聚合物可以发生絮凝，形成絮凝物。
Clay particles and polymers in water can be flocculated to form flocs.
将数学上的均匀化方法与有限元法相结合，预测了颗粒增韧增强聚合物基复合材料的有效性能。
The finite element method is combined with homogenization theory based on asymptotic expansion for predicting effective properties of polymer matrix composites toughened and strengthened by particles.
着重研究了不同结构的阴离子聚合物分散剂对悬浮液中颗粒间的静电斥力和空间斥力的影响。
The effects of anionic polymer dispersant with different structures on the electrostatic and steric repulsion forces between particles in the aqueous suspension are mainly studied.
实验结果表明，MDF水泥是由聚合物粘结水泥颗粒构成的新型材料。
The experimental results show that MDF cement is a new material composed of cement particles cohered together by polymer.
固体推进剂是一种颗粒填充高能聚合物，其破坏时所表现出的一些行为和金属的破坏相比，有明显不同之处。
The solid propellant is a high energy polymer filled with particles, which behavior of failure is evident different from metal.
新型承压堵漏剂在传统桥接堵漏单纯架桥、填充的基础上，引入具有较强吸水弹塑变形功能的聚合物弹性颗粒sd - 1。
Polymer elastic granule SD-1, has great hydroscopicity, was introduced to fill and squeeze and to enhance plug intensity on the traditional techniques.
本文从纤维增强PEEK、颗粒填充PEEK、PEEK表面改性、与聚合物共混等方面综述了PEEK改性研究的进展情况。
Enhancement of PEEK by adding continuous fibre and short fibre, particle fillers, surface modification and blend with polymers were reviewed.
该试验结果为无机刚性颗粒在聚合物中作用的能量耗散理论提供了有力的试验支持。
The effect mechanism for improving the mechanical properties of the polymer filled with plerospheres was studied using the energy dissipation theory.
缺乏力量允许聚合物材料和过滤的化合物保留他们原始的形状(形态学)和颗粒大小。
The absence of force allows both the polymeric material and the filtering compounds to retain their original shape (morphology) and particle size.
影响聚合物包膜肥料养分释放的因素主要有：膜厚、颗粒半径、扩散系数、养分组成及其溶解特性。
The factors that influence the nutrients release behavior are as followings: membrane thickness, granule radius, diffusion coefficient, nutrients composition and nutrient dissolving property.
IPN凝胶呈网状结构，聚合物网络结构的聚集体为圆球状颗粒形式，并可以观察到明显的结晶结构；
IPN gel shows network structure and the aggregate of the network structures is spherical particle, the crystal structure can also be observed obviously.
结果发现由于颗粒填料表面和环氧基体的相互作用，从填料表面开始形成了一层致密的聚合物界面层。
It was found that a dense polymeric interface layer would be formed on the surface of solid fillers due to the interaction between paniculate filler surface and epoxy matrix.
本发明涉及一种通过在围绕液滴的气相中聚合所述液滴来生产聚合物 颗粒的方法。
The invention relates to a method for producing polymer particles by the polymerisation of liquid droplets in a gas phase that surrounds said droplets.
该管式元件的至少一部分由包括聚合物和颗粒或纤维的复合物形成。
At least a portion of the tubular member is formed of a compound comprising a polymer and particles or fibers.
含有结合到水溶性或亲水性聚合物例如peg的磷脂的表面活性剂被用作该颗粒包衣。
Surfacants with phospholipids conjugated with a water soluble or hydrophilic polymer such as PEGare used as coating for the particles.
发现纳米颗粒能够在熔融的聚合物中迁移，并在燃烧的聚合物表面富集，形成阻隔层。
It is found that clay particles can migrate to the combusting polymer surfaces and form a retardant layer.
研制出一种新型分散剂，解决了在反应中聚合物粘槽，不呈颗粒及后处理困难等问题。
A novel dispersant was synthetized. The problems that the polymer adhere the reactor and aren't easily treated was solved.
为改善流体的流动在流体中所使用的添加剂。减阻剂常由聚合物或树脂材料制成，这些材料在固体颗粒上形成光滑的表面。
An additive used in a fluid to improve its flow. Friction reducer are often made of polymer or resin material that forms a slick surface on solids.
为改善流体的流动在流体中所使用的添加剂。减阻剂常由聚合物或树脂材料制成，这些材料在固体颗粒上形成光滑的表面。
An additive used in a fluid to improve its flow. Friction reducer are often made of polymer or resin material that forms a slick surface on solids.
应用推荐