对于表面活性稳定性和聚合物混合物的稳定性的作了简要概述。
A brief overview of surface active stabilization and stabilization of polymer blends is presented.
长期以来，聚合物混合物分散相的特征参数都是采用人工测量的方法。
For a long time, the characteristic parameters of the dispersed phrase of polymer blends are measured by manual work.
聚合物混合体应按单体单元比例相等、 种类相同的聚合物归入相应子目。
Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions.
因此，提取并研究聚合物混合物材料分散相的特征参数对于分析其性能有着重要的意义。
So, it is of significance to analyze its performance that measuring and studying the characteristic parameters of the dispersed phrase of polymer blends.
以聚丙烯酰胺与聚乙烯醇配成聚合物混合溶液，用甲醛和硼砂作为交联剂，形成一种双组分聚合物复合调剖剂体系。
A kind of complex profile control agent comprising bicomponent polymer was formed from polymer mixture comprising polyacrylamide and polyvinyl alcohol using formaldehyde and borax as the crosslinkers.
在配混过程中与基质聚合物混合之后，该非牢固的粘结发生破裂，并且该短切纤维束崩解成分散在基质聚合物中的单独的单根纤维。
Upon mixing in the compounding process with a matrix polymer, the fugitive bonds break, and the cut fiber bundles disintegrate into separate individual fibers dispersed in the matrix polymer.
采用凝胶渗透色谱（GPC）和X射线光电子能谱（XPS）研究了TATB炸药在AS／F2314两种组分的聚合物混合溶液的吸附行为。
The adsorption behave of TATB in the two-component polymer solution of AS and F2314 have been explored by means of Gel Permeation Chromatography(GPC) and X-ray Photoelectron Spectroscopy (XPS).
把这种聚合物和碳纳米管在一种溶剂中混合，可以将半导体管和导体管分离开。
Mixing the polymer with commercially available carbon nanotubes in a solvent separates semiconducting tubes from conducting tubes.
鲍哲南团队使用了一种聚合物，通过环绕半导体纳米管和非导电纳米管混合物，能够有选择地将它们分类。
Bao's group USES a polymer that selectively sorts the mixture by wrapping around semiconducting nanotubes, and not conducting nanotubes.
合成泥浆：矿物质、聚合物和海水组成的黏稠混合物使井壁保持稳定。
Synthetic Mud: a viscous cocktail of minerals, polymers and seawater stabilizes the borehole walls.
材料的合成过程是这样：首先，他使高温碳氢混合气体和铁催化剂相互作用产生密集的碳纳米管群，然后再用聚合物充填碳纳米管间的空隙。
He created this composite by growing a forest of nanotubes using hot hydrocarbon gases and an iron catalyst, and then filling the space between the tubes with the polymer.
成果：用两种聚合物的固态混合物，取代传统锂电池(上)中的液态电解质，Seeo公司的这种电池(下)可存储更多的能量。
Solid success: With a solid mixture of two polymers replacing the liquid electrolyte used in traditional lithium-ion cells (top), Seeo's batteries (right) can store more energy.
许多这些聚酯与淀粉混合应用的成本竞争力的生物降解塑料的聚合物。
Many of these polyesters are blended with starch based polymers for cost competitive biodegradable plastics applications.
该膜的抗张强度和断裂伸长率则明显地依赖于辐射剂量和聚合物的混合比例。
Their tensile strength and elongation at break were obviously dependent on irradiation dose and blending ratio of the polymers.
接下来，在金属基板上添加一种由两种聚合物组成的混合物来制作样品，这个工艺过程被称为嵌段共聚物光刻(BCP)。
Next, a mixture of two polymers is added to the metal substrate to create patterns, a process known as diblock copolymer lithography (BCP).
从理论上验证了多螺杆反应器在物料输运能力以及物料混合能力等方面均具有较佳的能力，多螺杆反应器更适合聚合物的加工。
It is verified in theory that the multiple-screw extruders have good material transportation and mixed ability. Multiple-screw extruder is fitter for polymer processing.
通过用聚丙烯微孔膜含浸混合单体然后原位共聚合的方法成功地制得了新型聚丙烯基互穿聚合物网络复合膜。
A novel polypropylene based interpenetrating polymer networks (IPN) was prepared via insitu copolymerization of mixed monomers within the pores of a microporous polypropylene membrane.
该体系是由膨润土，混合金属氢氧化物、阳离子聚合物、非离子表面活性剂等组成的。
This system consists of bentonite, mixed metal hydroxide, cationic polymer and non-ionic surfactants etc.
岩心实验结果表明，2株菌的混合发酵液可提高聚合物驱后岩心的原油采收率12.26%。
The results of core experiments show that the mixture fermentation liquid of these two bacteria can increase the recovery factor of the crude oil after polymer flooding by 12.26%.
设计的基本思想是开发一款可适用于超深水应用的，具有最优单位长度质量的混合复合材料和金属/聚合物柔性管。
The design concept consists of a hybrid composite and metallic/ polymer flexible pipe with optimized mass per unit length for ultra-deepwater applications.
聚合物和颜料在前面已经讨论过，混合溶剂是水溶性的乙二醇醚类， 它有助树脂在水中的水分散和提高涂膜的均一性。
The polymers and pigments have been discussed previously. Coalescing solvents are water-miscible glycol ethers which aid in the water-dispersibility of the resin and enhance coating uniformity.
在一些实施方案中，所述第一表层包含由聚丙烯酸酯和第二聚合物构成的混合物。
In some embodiments, the first skin layer includes a mixture of a polyacrylate and a second polymer.
本发明还涉及一种涂料组合物，其包括镁粉和硅烷改性的环氧异氰酸酯混合聚合物或预聚物。
The present invention also relates to a coating composition that includes magnesium powder and a silane modified epoxy isocyanate hybrid polymer or prepolymer.
聚合物改性沥青混合料具有较高的杭车辙能力。
The polymer-modified binder has higher resistance stability to rutting.
针对表面接枝二分散聚合物与溶剂的混合体系建立了描述聚合物平衡态密度分布的自洽场理论。
The density profiles in a mixture of bidisperse polymer brushes and solvent are simulated with the aid of a self-consistent field theory.
扫描电镜SEM图表明这种混合型聚合物膜具有蜂窝状结构，有利于膜电导率的增加。
The SEM images show that the blend polymer electrolyte films have alveolate network structures, which benefit the increase of ionic conductivity.
对于聚合物这样的高粘物系，不可能产生湍流来产生高效混合，层流混合是高粘流体唯一可能的混合方式。
For fluids with high viscosities such as polymers, effective mixing is not achievable by turbulent flow and laminar flow is the only method for mixing of fluids with high viscosities.
综述了三维混沌混合的原理及其在聚合物共混物加工方面的应用。
The principle and application in polymer processing of the chaotic mixing was reviewed.
综述了三维混沌混合的原理及其在聚合物共混物加工方面的应用。
The principle and application in polymer processing of the chaotic mixing was reviewed.
应用推荐