工业上用其部分替代青铜、黄铜和巴氏合金等制造减摩、耐磨零件。
ZA alloys have been used to substitute for some traditional alloys such as brass, bronze and babbitt metals to prepare some wear-resistant and anti-friction components.
适用于冷冲、冷墩、冷拉、冷挤、整形等模具以及各种耐磨零件、剪切和量卡工具等到。
It is suitable for making cold punching and heading dies clod extruding and drawing dies. And reshaping too ls and various wear parts, shearing tools and measuring and fixing instruments.
奥贝球铁能够实现高硬度的同时具有较高的韧性，适用于一定冲击条件下耐磨零件的工作要求。
ADI can realize the performance of both high hardness and toughness, satisfying the requirements of wear-resistant parts under impact condition.
松孔镀铬层应用于受重压的滑动摩擦件及耐热、抗蚀、耐磨零件，如内燃机汽缸内腔、活塞环等。
Loose hole plating chromic layer by weight used in the sliding friction parts and heat resistance, corrosion, wear parts, such as internal combustion engine cylinder lumen, piston rings.
切削加工成形后可以进行渗碳处理，用来制造表面硬、中心韧性高的仪器仪表零件及轴类耐磨件。
Cutting processing after forming can be carburizing processing, used to make the surface hard, center of high toughness instrumentation parts and axis wear parts.
感应淬火的目的已从仅仅提高零件的局部耐磨性扩大到提高零件的整体静强度和疲劳强度。
The aim of induction quenching has been enlarged from only improving local wear resistance to improving whole static strength and fatigue strength of parts.
WC型管状焊条是一种高硬度、高耐磨性的堆焊焊条，广泛用于强烈磨损的零件上。
WC-cored electrode is a repair welding electrode with high hardness and high wear resistance, which has been widely used in circumstance with violent wear.
零件表面质量对零件的耐磨性、抗疲劳强度、接触刚度等使用性能和寿命有很大的影响。
It is well known that surface quality of parts has great influence on the operational performance such as wearing quality, figure strength and contact stiffness.
零件表面质量对零件的耐磨性、抗疲劳强度、抗腐蚀性及接触刚度等使用性能以及寿命、可靠性都有很大的影响。
Surface quality of parts has great influence on the operational performance such as wearing quality, figure strength, corrosion resistance and contact stiffness.
在经过了电镀后，可以通过利用铬的特性，来进行提高零件的硬度、耐磨、耐温和耐蚀……等性能。
After plating, the hardness, wear resistance, corrosion resistance and wear resistance of the parts can be improved by using the characteristics of chromium... Such performance.
内部零件，均为不锈钢，抗腐蚀、耐磨损、使用寿命长。
The parts of this trap are made of stainless steel, featured with anti-corruption, abrasive and long service life.
结果表明经激光处理后，其表面强度满足了HT300用于一般零件对表面硬度、耐磨性等机械性能的要求。
The experimental results have shown that the hardness, wearability, strength of general components used HT300, and the results also provide a basis for improving the surface properties of components.
用该工艺处理齿轮模具等零件，变形小，耐磨性高，零件的寿命高。
To deal with such as gear die spares with this technology, the deformation has been decreased, the wearability and the service life have been increased.
表面粗糙度与机械零件的配合性质、耐磨性、工作精度、抗腐蚀性有着密切的关系，它影响到机器或仪器的可靠性和使用寿命。
The surface roughness directly influences the conformity, wear resistance, corrosion resistance, working accuracy of the machine, and the reliability of the instrument and its service life.
阐述了造纸磨浆盘磨机易损零件—磨盘的磨损机理，性能要求，耐磨球铁材质的选用；介绍了生产过程和产品质量控制的方法。
Elaborates millstones wearing mechanism, performance requirement and material selection for vulnerable of pulp millstones and introduces production process and quality control.
一种新的坐衬零件材料要求高耐磨性、高耐热性和高强度，热膨胀系数接近铸铁。
New material for sitz lining part requires high abrasion resistance and high strength at elevated temperature. It is difficulty for a single material to meet all the requirement.
本实用 新型结构简单紧凑、零件少易装配，滑行性能好，并且加工简单，成本低，无噪音，耐磨损。
The noiseless durable bicycle flywheel has the advantages of compact structure, fewer parts, easy assembly, good sliding performance, easy machining, low cost, no noise and abrasion resistance.
拨叉主要推动齿轮的移动，这就需要零件有一定的强度，任性和耐磨性。
Fork movement of the main driving gear, which requires a certain degree of intensity of parts, self-willed and wear resistance.
用于堆焊水轮机受气腐蚀破坏零件和要求耐磨性及韧性高的高锰钢制作的堆焊。
For surfacing welding the parts of water-wheel machine been corroded and destroyed, the product made high-manganese which need have great wear out resisting and toughness.
用于堆焊水轮机受气腐蚀破坏零件和要求耐磨性及韧性高的高锰钢制作的堆焊。
For surfacing welding the parts of water-wheel machine been corroded and destroyed, the product made high-manganese which need have great wear out resisting and toughness.
应用推荐