本文对气固冲蚀和浆体冲蚀条件下耐磨环氧胶粘涂层的磨损特性进行了研究。
The wear properties of antiwear adhesive coatings under solid particle erosion and slurry erosion condition were studied in this paper.
此法使耐磨层的硬度、耐磨性有明显提高，延长了耐磨板、耐磨环的使用寿命。
The hardness and wear resistance of the layer are significantly increased, service life of wear plate and wear ring is extended.
选择合理的耐磨材料与敷焊工艺对解决鄂北工区钻杆偏磨耐磨环失效问题非常重要。
It is very important to resolve the problems of anti-friction ring failure due to partial worn at Northern Erdos Work Areas by reasonable selection of high-abrasive materials and welding techniques.
—眼镜板和耐磨环采用硬质合金，耐磨性好，且更换方便，耐磨环具有磨损后自动补偿间隙功能。
The super anti-weary glass plates and cutting rings made of hard alloy greatly prolonged the service life the weary parts. cutting ring with self-compensating wear-resisting ring.
松孔镀铬层应用于受重压的滑动摩擦件及耐热、抗蚀、耐磨零件，如内燃机汽缸内腔、活塞环等。
Loose hole plating chromic layer by weight used in the sliding friction parts and heat resistance, corrosion, wear parts, such as internal combustion engine cylinder lumen, piston rings.
介绍了用一种固定耐磨合金辊环代替传统轧辊的装置进行设计和应用，并对该装置与国外类似装置进行比较分析。
The paper introduces the design and application of a fixed wearable alloy roller ring to replace a traditional one, and analyses and compares it with foreign similar equipment.
采用氩弧局部强化可提高环槽的硬度和高温耐磨性。
Application of argon arc local strengthen can increase hardness and high-temperature wear resistance of the ring groove.
本文介绍了用耐磨仪、试穿和扫描电镜三种试验手段，对自捻纱和环锭纱腈纶针织物所作的耐磨性能测试情况。
The wearing tests of the knitted acrylic fabric of self-twist and ring spinning yarn is conducted by means of the wear testing instrument, the wear trial and the scanning election microscope.
在环氧胶粘涂层中加入填料可提高其强度和耐磨性。
The strength and wearing resistance of epoxy bonding can be improved by adding fillers.
特种黄铜同步器齿环在应用中耐磨性差。
Special brass synchronizer tooth ring wear ability is poor in using.
研究了粉末热锻浮动油封密封环的材质、表面处理、显微组织对其耐磨性的影响。
The effects of material composition, working surface treatment and microstructure on wear resistance of powder hot-forging flow oil-seal ring were studied.
我们都知道环氧地坪是耐磨、防腐等装饰性的地板，但长期使用也会对其进行修复的。
We all know that the epoxy floor is wear-resistant, anti-corrosion and other decorative floor, but the long-term use will be repaired.
环氧耐磨涂层的脆性冲蚀特征较为明显，冲蚀由显微切削机制和断裂机制等机制决定。
Pure epoxy coating shows typical brittle erosion behavior, and the erosion is determined by both micro-cutting mechanism and fracture mechanism.
结果表明，用此技术制造的缸套符合技术要求，并具有较高的耐磨性，缸套和活塞环具有良好的配合性能。
The results showed that the cylinder liners made such way met their technical requirements and were of excellent wear-resistance, as well as of good matchability with the piston rings.
银合金作为导电环材料，因其硬度偏低、耐磨性差，影响使用寿命，同时，还存在价格昂贵的问题。
When silver alloy is used as conducting ring material, its service life is influenced by its slightly low hardness and bad abrasion resistance behavior, meanwhile it is prohibitive.
采用PANOF转杯纱开发的织物在阻燃性、耐磨性方面明显优于环锭纱织物。
The flame retardant fabric developed with rotor spun PANOF yarns was obviously superior to that with ring spun yarns.
通过对碎煤齿环的失效分析，找出了影响齿环寿命的因素及薄弱环节，并研制成功了最优成分的耐磨材料和堆焊工艺，显著提高了生产率和企业的经济效。
The wear-resistant material with best composition and overlay welding process were successfully developed, and the productiviting and the economic benefit were obviously improved.
以环氧E-20为基料，加入二硫化钼、氧化铝为填料的一种常温固化耐磨防腐涂层。
The room temperature cured abrasion resistant anticorrosive coatings is prepared with E-20 epoxy as binder and molybdenum disulfide and aluminum oxide as fillers.
采用环块接触形式进行材料的耐磨试验。
The wear_resistant properties were examined by means of ring-block contact wear test.
眼镜板和切割环采用高硬耐磨合金材料，寿命更长。
Adopted with rigid and wearable alloy materials, the glass-like plate and cutting ring have longer longevity.
钢丝绳的两端通过圆形金属环固定且与弧形耐磨金属片交织成网状；
The two ends of each steel wire rope are fixed through the circular metal rings and are interwoven with the arc-shaped wear-resistant metal sheets to form a net.
通过快速模拟磨损试验发现铌铸铁油环耐磨性能比铬钼铜油环提高87.3%，并降低了油环的制造成本。
The results also find that wear resistance of niobium cast iron oil ring is 87.3% higher than that of CrMoCu alloy cast iron along with the cost reduction for niobium cast iron oil ring.
该公司获得专利技术，进口设备、采用具有钢性大，耐磨性及耐环境压力等特点的高密度聚乙烯树脂生产200升环型塑料桶。
The company has imported advanced equipment and can produce 200-litre annular barrel by using high density polyvinyl resin which is of high rigidity and abradability and can bear ambient pressure.
这种分散体系可作为一种紫外光固化水性涂料，其涂膜的耐磨性、柔韧性都比环氧丙烯酸酯涂膜增强，而硬度变化不大。
These dispersions can be used as waterborne ultraviolet-curable coatings, the abrasion and flexibility of their film are better than that of epoxy acrylate coatings, but the hardness decrease little.
激光淬火的环槽表面具有良好的耐磨性，比原高频淬火和镀铬工艺处理的耐磨性有较大提高。
Laser quenched groove surface has high wear resistance, and its wear resistance is higher than that of groove by using high frequency quenching and chromium plating method.
研究了大型柴油机活塞项环槽激光淬火层的组织、耐磨性和磨损机理。
The structure, wear resistance and wear mechanism of laser quenched layer on the groove surface of the piston head were studied in this paper.
研究了大型柴油机活塞项环槽激光淬火层的组织、耐磨性和磨损机理。
The structure, wear resistance and wear mechanism of laser quenched layer on the groove surface of the piston head were studied in this paper.
应用推荐