因此，要求两段炉用煤比单段炉用煤更应具有较高的抗碎、落下和耐磨强度。
Squeeze Therefore, request two paragraphs than single segment with coal stove with coal more should have furnace broken, high resistance and wear strength falling.
本发明对可显著提高金属零部件表面的耐磨强度，具有工艺简单、操作方便、生产成本低的明显优势。
The invention can obviously enhance the abrasive resistance of the surface of the metal part and has obvious advantages of simple process, convenient operation and low production cost.
齿轮齿形采用磨齿加工，齿面采用智能控制渗碳淬火技术，齿轮的强度高、韧性和耐磨性好。
Employing abrasive machining for the form of the gear and intellective-control carburizing and quenching technology for the surface, the gear is with high intensity, strong tenacity and wearability.
尤其是其齿轮壳的材质为高强度增强尼龙，并经高湿工艺处理而变得更耐磨、更耐用。
Especially the gear shell material for high strength reinforced polyamide, and the high humidity craft processing and become more wear-resisting, more durable.
尤其是其齿轮壳的材质为高强度增强尼龙，并经高湿工艺处理而变得更耐磨、更耐用。
Especially the gear shell material for high strength reinforced polyamide, and the high humidity craft processing and become more wear-resisting, more durable.
硬化混凝土地坪中，节约水泥用量，施工中不提浆，增加强度和耐磨耐久性作用。
For concrete ground, it can save the cement consumption, and no purifying is needed, which increases the strength and wear resistance.
采用转移法生产反光材料，其反光强度高、外观光滑细腻、手感柔软，且防水、耐磨、耐洗。
The reflective material produced by transfer method, featured high reflective strength, smooth and fine appearance, soft handle, and water proof and abrasion resistance and washing resistance.
同时具有接触强度高，耐磨损，传动效率高等优点。
Additionally, it has advantages of higher contact strength, wearproof and efficiency in transmission.
对挤条产品有侧压强度的测试，堆积强度测试和耐磨测试。
For extrudates there are side crushing strength tests, bulk crushing strength tests, abrasion tests.
作为合金元素加入钢中可使钢合金化，增加钢的强度、硬度、延展性、韧性和耐磨性等。
As an alloy element, silicon manganese can alloy the steel, strengthen the intensity, hardness, malleability toughness and wearability of the steel.
它具有优良的弹性、拉升强度和耐磨性。
It has excellent resiliency, tensile strength, and abrasion resistance.
文件的硬(60rc)高强度铝合金管提供了一个平稳无腐蚀密封面和良好的耐磨性。
The file hard (60rc) high strength aluminum alloy tube provides a smooth corrosion free sealing surface and excellent abrasion resistance.
选择性使用和布局调质结构钢获得了极优的耐磨性和强度。
Selective use and placement of quench and tempered construction steels provide excellent wear and strength properties.
因此，该机筒具有高强度、高耐磨、高耐蚀等特性。
Wherefore, this machine barrel possesses characters like high strength, wear resistant, and strong anticorrosion.
文件的硬（60RC）高强度铝合金叶管提供了一个平滑，无腐蚀耐磨密封面。
The file hard (60RC) high strength aluminum alloy lobe tube provides a smooth, corrosion-free abrasion-resistant sealing surface.
具有很好的耐磨性、弹性、扯断强度及伸长率。
Has good abrasion resistance, elasticity, tensile strength and elongation.
低碳钢适用于以下情况：工具机身，把手，模座及其它不要求强度和耐磨性的类似情况。
Low carbon steels are well suited for the following applications: tool bodies, handles, die shoes, and similar situations where strength and wear resistance are not required.
针对传统上高锰钢作为履带板材料在实际应用中的不足，研究了一种新型的铸造m - B低合金高强度耐磨钢。
A kind of new M-B low-alloy wear resistance steel with high strength has been studied to overcome the deficiency of traditional high-manganese steel used in making grippad.
l机械强度高、耐磨、适宜在线反冲洗，操作方便，运行成本低。
L High mechanical strength, anti-friction and suitable for on-line back flush, easy to operate and low cost.
聚氯乙烯纤维强度高、弹性好、耐磨性和耐气候性能好、保暖性能和保健性好、抗燃性强。
It was high intensity, good elasticity, efficient in heat insulation and health care, strong resistance to wearing, weathering and flame.
由此产生的复合材料具有优异的强度且耐磨性优于单橡胶。
The resulting composite has superior strength and abrasion resistance over rubber alone.
由于其结构致密，具有较高的抗拉强度且耐磨、抗裂、抗酸碱腐蚀性能优异，宜用于防腐蚀整体面层和块材面层的铺砌材料。
Due to dense structure, high tensile strength, excellent wear-ability, anti-crack and corrosion resistance against acid and alkali, it can be used as integral anti-corrosion coat and block coat.
它们具有高强度，透明并耐油和耐磨。
They are strong, transparent, and resistant to oils and abrasion.
耐磨、耐高温、高强度含油高分子塑体滑块；
Wearable, Anti-High temperature, high strength oiliness macromolecule nylon slide block.
铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊。
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
适用范围：应用于地上、地下高强度的混凝土工程及抗冻、抗渗、耐磨性要求的混凝土工程。
Applicable scope: overground and underground high stringent concrete project. And anti - freeze, impervious, abrasion resistant concrete project.
耐磨地面是具有高强度且耐磨的新型楼地面，它施工简便、适用面广。
As a new building floor of high strength and wear resistance, wearing floor is easy to construct and of wide applicability.
介绍了抗腐蚀高强度耐磨涂料的研制和开发，以及用作柳钢球团回转烘干机刮板保护涂层的应用效果。
The development and application of corrosion-resistant and high strength and abrasive-resistant coating as well as it effects on the scraper of pellet rotary dryer in Liugang were introduced.
结果表明，玻璃纤维的加入可提高橡胶的耐磨性，并且橡胶的耐磨性与强度和硬度具有线性关系。
The results showed that GF can provide wearproof of the rubber composite, and relation wearproof and tensile strength, hardness of the rubber composite was linear.
特有的高强度耐磨皮带，链接式结构无需加装皮带紧固器，可方便拆下调整其松紧度，最大限度地延长使用期限。
Unique high strength and endured abrade strap with link structure which not need add the tightened implement and can easy to remove to adjust the degree of tightness, prolong the using term farthest.
应用推荐