可以满足挖掘机斗齿、齿座类等耐磨件性能的要求。
It can meet with the requirement of wear-resistant part such as bucket teeth and bucket teeth seat of excavator etc.
由于采用了特殊的耐磨件，延长了转子内易损件的使用寿命。
初步应用表明，它在切削工具、模具及耐磨件中的应用前景良好。
Rudimental applications have shown their bright prospects for moking cutting tools, dies and wear-resistant parts.
切削加工成形后可以进行渗碳处理，用来制造表面硬、中心韧性高的仪器仪表零件及轴类耐磨件。
Cutting processing after forming can be carburizing processing, used to make the surface hard, center of high toughness instrumentation parts and axis wear parts.
阀体和内件由高温合金钢制造，其特点是高温下耐磨和阀体寿命长。
The valve body and internals are made from high-temperature alloy which features high-temperature abrasion resistance and long service life.
高品质尼龙耐磨洗地刷盘，节省易损件成本。
High quality nylon abrasive cleaning brush set, save cost wearing parts.
高品质耐油、耐磨水刮，并可四面调用，节省易损件成本。
The high quality oil resistance, abrasion resistance, water and can call all around, save cost wearing parts.
松孔镀铬层应用于受重压的滑动摩擦件及耐热、抗蚀、耐磨零件，如内燃机汽缸内腔、活塞环等。
Loose hole plating chromic layer by weight used in the sliding friction parts and heat resistance, corrosion, wear parts, such as internal combustion engine cylinder lumen, piston rings.
WC型管状焊条是一种高硬度、高耐磨性的堆焊焊条，广泛用于强烈磨损的零件上。
WC-cored electrode is a repair welding electrode with high hardness and high wear resistance, which has been widely used in circumstance with violent wear.
奥贝球铁能够实现高硬度的同时具有较高的韧性，适用于一定冲击条件下耐磨零件的工作要求。
ADI can realize the performance of both high hardness and toughness, satisfying the requirements of wear-resistant parts under impact condition.
曲轴箱缸体是汽车中最大、·最复杂的金属件，一般由优质合金铸铁制成，以增强其耐磨性。
They are usually made of high-grade cast alloy iron to improve wear characteristics of the cylinder.
感应淬火的目的已从仅仅提高零件的局部耐磨性扩大到提高零件的整体静强度和疲劳强度。
The aim of induction quenching has been enlarged from only improving local wear resistance to improving whole static strength and fatigue strength of parts.
高锰钢是一种典型的难加工材料，因其优良的耐磨性和低廉的价格，被广泛用于制作受冲击较大的零部件。
As a kind of typical hard machining materials, owing to its abrasion resistance and low cost, high manganese steel is widely used for those components that bear great impacts.
高耐磨耐蚀合金涂层对于提高工业零部件的使用寿命具有重要作用。
Alloy coating with high wear-and corrosion-resistance plays an important role in elongating the life of industrial components.
零件表面质量对零件的耐磨性、抗疲劳强度、接触刚度等使用性能和寿命有很大的影响。
It is well known that surface quality of parts has great influence on the operational performance such as wearing quality, figure strength and contact stiffness.
零件表面质量对零件的耐磨性、抗疲劳强度、抗腐蚀性及接触刚度等使用性能以及寿命、可靠性都有很大的影响。
Surface quality of parts has great influence on the operational performance such as wearing quality, figure strength, corrosion resistance and contact stiffness.
结果表明经激光处理后，其表面强度满足了HT300用于一般零件对表面硬度、耐磨性等机械性能的要求。
The experimental results have shown that the hardness, wearability, strength of general components used HT300, and the results also provide a basis for improving the surface properties of components.
表面粗糙度与机械零件的配合性质、耐磨性、工作精度、抗腐蚀性有着密切的关系，它影响到机器或仪器的可靠性和使用寿命。
The surface roughness directly influences the conformity, wear resistance, corrosion resistance, working accuracy of the machine, and the reliability of the instrument and its service life.
零部件经过热处理，强度高，耐磨性好。
Components are under heat treatment. high impact and good abrasion resistance.
碳化硅作为铸铁件激冷材料，可以使铸件获得致密而耐磨的组织。
Carbofrax used as the chill material for casting may make casting obtain compact and wear-resistant structure.
论述了陶瓷内件控制阀的研制，该阀内件同时具有耐腐蚀、耐磨损(包括冲刷、气蚀)与耐高温的性能。已获得成功应用。
The control valves with ceramic trim are expounded. It has the corrosion-proof, abrasion-proof and high temperature proof performance, and it also has obtained successful application.
轧辊不仅需要具备高强度和高耐磨性，还必须具有高的抗热疲劳强度和耐腐蚀性以及抗氧化性，是轧钢行业的主要消耗件之一。
Roll collar, needing not only high strength and wear resistance but also thermal fatigue resistance and corrosion resistance, was one of the components which were damaged easily in rolling process.
阐述了造纸磨浆盘磨机易损零件—磨盘的磨损机理，性能要求，耐磨球铁材质的选用；介绍了生产过程和产品质量控制的方法。
Elaborates millstones wearing mechanism, performance requirement and material selection for vulnerable of pulp millstones and introduces production process and quality control.
本发明既保证了阴、阳接触件之间的耐磨性，又可以满足整个接触件的耐盐雾要求，同时降低成本。
The present invention ensures contact element wearability between cathode and anode, and satisfy whole contact element salt fog resistant requirement with low cost.
金属件试了两种新色，镀钛与镀钛金，很耐磨的。
We test two new colors on metal parts, plating titanium and titanium gold, they are very durable.
重要部件均采用进口优质钢材，磨件采用高性能耐磨材料，整机耐磨性能高。
The main parts adopt imported quality steel, and the easy-wearing parts adopt high quality resistant material and the whole machine is more durable.
工业上用其部分替代青铜、黄铜和巴氏合金等制造减摩、耐磨零件。
ZA alloys have been used to substitute for some traditional alloys such as brass, bronze and babbitt metals to prepare some wear-resistant and anti-friction components.
工业上用其部分替代青铜、黄铜和巴氏合金等制造减摩、耐磨零件。
ZA alloys have been used to substitute for some traditional alloys such as brass, bronze and babbitt metals to prepare some wear-resistant and anti-friction components.
应用推荐