结论羟丙基甲基纤维素可改善片剂溶出度，效果明显。
Conclusion HPMC can improve the dissolution of tablets and the effect is obvious.
研究羟丙基甲基纤维素对磷酸钙骨水泥可注射性的影响。
To study the influence of hydroxypropyl methyl cellulose (HPMC) on injectability of calcium phosphate cements (CPC).
优良的羟丙基甲基纤维素能有效解决高温下的保水问题。
Excellent HPMC can effectively solve the problem of water under high temperature.
方法采用正交设计以体外溶出为指标，以羟丙基甲基纤维素为阻滞剂，进行处方筛选。
METHODS the orthogonal design method was used to optimize the formulation. Hydroxy propyl methyl cellulose was used as matrix.
此外，在滞后时间药物之释出速率受到羟丙基甲基纤维素凝胶化程度与溶离 液离子强度影响。
The release rate after the lag time was determined by the extent of retardation of gelation of HPMC in the core tablet based on the ionic strength of the medium.
通过掺入低粘度的羟丙基甲基纤维素后，砂浆的施工和易性能得到了极大的改善，但强度有所降低。
Through adding low viscidity Hydroxypropyl Methyl Cellulose, workable performance of the dry mix can be most improved, but compress strength reduce.
羟丙基甲基纤维素是以天然高分子材料纤维素为原料，经一系列化学加工而制成的非离子型纤维素醚。
Hydroxypropyl methyl cellulose is a natural polymer cellulose as raw material, through a series of chemical processing and made of nonionic cellulose ether.
羟丙基甲基纤维素在生活中的使用范围很广泛，但是在实际的使用过程中，一般的人很难将它们识别出来。
Hydroxypropyl methyl cellulose used in life is very wide, but in actual use process, the average person is difficult to be identified.
目的比较IOL植入术中1%透明质酸钠(SH)和2%羟丙基甲基纤维素(HPMC)在房水中的残留量。
ObjectiveTo compare the residue of sodium hyaluronate (SH) 1% with hydroxypropyl methylcellulose (HPMC) 2% in aqueous humor in IOL implantation.
在高温季节，尤其是炎热干燥地区及向阳面的薄层施工，需要高品质的HPMC羟丙基甲基纤维素提高浆料的保水性。
In the hot season, especially in hot dry areas and the thin layer Xiangyang construction, need water retention of high quality HPMC hydroxypropyl methyl cellulose slurry to improve.
羟丙基甲基纤维素（HPMC）作为构成亲水凝胶骨架片的主要控释、缓释材料广泛用于药物的控释和缓释制剂的研究。
Hydroxypropylmethylcellulose(HPMC), as hydrophilic gel matrix, is widely applied in the study of controlled release and sustained release preparations.
通过掺入低粘度的羟丙基甲基纤维素后，砂浆的施工和易性能得到了极大的改善，可以较好地克服新型墙材出现的墙体裂缝等问题。
Through adding low viscidity HPMC, workable performance of the dry-mixed mortar can be greatly improved, and this dry-mixed mortar can well solve the crack problem of wall.
先在容器中放入适当的热水，加热到70摄氏度之后，再慢慢地搅拌，加入羟丙基甲基纤维素，它就会浮到水面上，然后形成一种淤浆。
To add the appropriate water in a container, heated to 70 degrees Celsius, then slowly stirring, adding hydroxypropyl methyl cellulose, it will float to the surface, and then forming a slurry.
这就是羟丙基甲基纤维素的主要溶解办法，它的使用范围是很广泛的，受到了很多行业的欢迎，相信大家现在对它有了更进一层的了解了吧。
This is the main solution of hydroxypropyl methyl cellulose solution, its use scope is very broad, subject to a lot of industry welcome, I believe we now have more into a layer of understanding.
近年来新剂型不断涌现，充液胶囊就是其中之一，其采用明胶或羟丙基甲基纤维素(HPMC)外壳，以全新概念的固体剂型液体释放而备受关注。
Novel dosage forms emerges more and more in recent years. One of them is liquid-filled hard gelatin capsules, which adopt gelatin or the hydroxypropyl methyl cellulose (HPMC) as capsule shell.
羟丙基甲基纤维素(简称HPMC)是一种国内紧缺的高科技精细化工产品，广泛应用于许多工业领域和日常生活之中。在我国，这类产品的生产技术和应用开发还处于起步阶段。
Hydroxypropyl methyl cellulose (HPMC) is a kind of high-tech fine chemical product that is in short supply in domestic, and is applied extensively in a lot of industrial fields and daily life.
方法：考察糊精、羧甲基淀粉钠、微晶纤维素和低取代羟丙基纤维素对银黄酮片的质量影响。
METHODS: the effects of dextrin, CMS-Na, microcrystalline cellulose and L-HPC on the quality of Ginkgo flavone tablets were studied.
以木屑纤维素为原料，以3 -氯- 2 -羟丙基三甲基氯化铵(CTA)为醚化改性剂，制备了阳离子木屑纤维素。
The cationic sawdust cellulose was prepared with the sawdust cellulose as raw material and 3-chlorine-2-hydroxypropyl chloride (CTA) as an etherification modifying agent.
羧甲基羟丙基纤维素的溶液粘度稳定是其最大优点。
The solution viscosity of carboxymethyl hydroxypropyl cellulose is the biggest advantage of stability.
方法考察糊精、微晶纤维素、羧甲基淀粉钠和低取代羟丙基纤维素对扁蓄总黄酮片的质量影响。
Medthods The effects of dextrin, microcrystalline cellulose, CMS-Na and L-HPC on the quality of the total Flavone of Polygonum Aviculare Tablets were studied.
滞后时间，随包覆膜衣量之增加而延长却因添加亲水性羟丙基甲基 纤维素塑化剂与添加水量于膜衣溶液而缩短；
The lag time increased with a higher coating level, but decreased with the addition of the hydrophilic plasticizer, Pharmacoat 606, and of the water amount in the coating solution.
滞后时间，随包覆膜衣量之增加而延长却因添加亲水性羟丙基甲基 纤维素塑化剂与添加水量于膜衣溶液而缩短；
The lag time increased with a higher coating level, but decreased with the addition of the hydrophilic plasticizer, Pharmacoat 606, and of the water amount in the coating solution.
应用推荐