对于例外准确的诊断结果因其对控制措施的影响而十分重要的情况,实验室网络正在提供后援支持。
The laboratory network is providing backup support for situations in which exceptionally precise diagnostic results are important because of the implications for control measures.
简介了全分布式控制网络构成的水电厂微机监测系统的结构、功能和故障诊断系统。
A brief introduction is given about the structure. function and fault diagnosis system formed by overall distributed controlled network in hydroelectric plant.
介绍了BP网络用于船舶发电机转速控制系统传感器故障诊断的方法。
BP networks on fault diagnose of sensor used on generator speed control system of Marine is introduced.
监测并配置网络,调节通信系统并诊断参数,以此来控制数据通过何种方式传输到哪里,以及谁访问过。
Monitor and configure your network, adjust communications and diagnostic parameters to control how and where data travels and who has access.
将神经网络与专家系统相结合,提出了一种应用于无人机指挥控制系统的智能故障诊断方法。
An intelligent fault diagnosis approach for UAV command and control system is presented by combining neural network and expert system.
采用CAN总线网络通信与集成技术,完成分布式远程控制和故障诊断。
Uses the CAN-Bus network correspondence and the integrated technology, completes the distributional long-distance control and the breakdown diagnosis.
由于控制平面和数据平面相分离,因此故障管理和诊断是MPLS网络面临的一大挑战。
Fault management and diagnosis is a challenge in MPLS networks due to the separation of control plane and data plane.
研究结果表明,神经元网络技术可应用于核动力堆的故障诊断和控制。
The result of the study shows that it is possible to use the technology of neuron network in fault diagnosis and control of the nuclear power piles.
现场总线带来了过程控制系统的开放性,使系统成为具有测量、控制、执行和过程诊断等综合能力的控制网络。
Fieldbus has brought opening to process control system and made the system become control networks with abilities of measurement, control, actuation and process diagnosis etc.
设计了一个简单的人工智能故障诊断系统模型,它包括知识库、模糊推理、神经网络和控制模块等。
A simple artificial intelligence system for fault diagnosis established in this paper. The system consists of knowledge base, fuzzy reasoning module, neural network module and control module.
本文介绍了神经元网络在控制系统故障诊断中的应用,讨论了神经元网络用于控制系统故障的离线诊断与在线诊断。
In this paper, the application of neural network is presented in the control system fault diagnosis. The method of on-line and off-line fault diagnosis are given.
文章介绍了PLC网络故障诊断的方法,并给出了磁悬浮列车运行控制系统PLC网络故障诊断的实例。
This paper introduces the method of malfunction diagnosis on PLC network, and gives the example of running control system on maglev train.
可以在大型机械设备群的故障诊断系统中实现分散采集、集中控制、网络化通信结构。
It can be used in the large mechanical equipment's failure diagnosis system for decentralized collection, centralized control, and communications networking structure.
提出了带有周期通信序列(PCS)的多输入与多输出分布式网络化控制系统的故障诊断方法。
The fault diagnosis of multi-input and multi-output distributed networked control system with periodic communication sequence(PCS)was investigated.
针对控制系统中模拟电路故障诊断时的不确定性问题,提出了将模糊理论和神经网络相结合的方法。
In order to handle the uncertainties in fault diagnosis of analog circuits used in the control system, a method, which combines fuzzy theory and neural network, was proposed.
研究了基于静态信息调度框架的网络控制的故障诊断问题。
In this paper, networked control systems are modeled based on information scheduling scheme and the fault detection problems of them are studied.
从而实现对现场设备的远程监测、控制、诊断和配置,实现嵌入式系统网络化、智能化。
As a result they can remote monitor, control, diagnose and configure embedded system, which endow embedded system with network and intelligence functions.
程序采用网际控制报文协议(ICMP)方式对网络进行诊断执行效率低。
Making use of Internet Control message Protocol (ICMP) message for the diagnosis carries out low efficiency.
重点研究了这种仿真计算机系统的网络结构、协议与控制方式、系统时钟同步控制及在线故障诊断等问题。
The paper discusses the architecture of simulation computer based on microcomputer network, the communication protocol, the synchronization issues and the fault diagnoses of the simulation system.
基于这两种模型,我们提出了一种用于故障诊断的联想搜索网络,并把它应用于一个锅炉给水装置的控制系统故障诊断上,最后给出了计算机的仿真结果。
Based on these two models, we propose an associative search algorithm for fault diagnosis and apply it to a control system. At last, the simulation results are given out.
解决了基于无线网络的掌上电脑视频获取与显示、设备控制等关键技术,使掌上电脑成为设备监控与故障诊断系统中的一种便捷的工具。
The key technologies of video display, equipment control with PDA based on wireless network are implemented, which makes PDA to be a convenient tool in MFDS.
然后将人工神经网络引入PLC控制系统故障诊断,提出了一种新的故障诊断方法。
Then by applying artificial neural network to fault diagnosis of systems controlled by PLC, a new method is provided.
目前,在工业控制现场中大量的采用了PLC控制,因此PLC控制网络也成为远程故障诊断系统的一个重要环节。
Nowadays, PLC has largely been used at the industrial spot, consequently PLC controlling network has been an important diagnostic object of RFDS (Remote Fault Diagnosis System).
网络化控制系统实现了资源共享、减少了系统布线、提高了系统的可诊断性和可维护性。
Networked control system shares the resource, reduces system wiring and increases the convenience of system diagnosis and maintenance.
我们提供的智能型控制器线传感器,扩展其功能,包括供应在线监测,诊断和网络通信可编程逻辑与。
We offer a line of intelligent proximity sensors that extend their functionality to include supply line monitoring, diagnostics and network communication with a programmable logic controller.
远程数据采集与控制、调用仪器资源、诊断设备故障是网络化测试的典型应用。
There are many typical applications such as remote data acquisition and controll, transferring instruments resource, diagnosing fault and so on.
介绍HXD1型大功率交流电力机车用SIBAS32控制系统、TCN列车通讯网络及其CCU控制软件的结构,分析机车网侧部件控制、自动过分相控制、操作逻辑控制、牵引/制动控制等功能,给出了机车故障诊断和调试的方法。
Presented in this paper are the structure of SIBAS32 control system, TCN train communication network and its CCU control soft of type HXD1 high-power AC electric locomotive.
介绍HXD1型大功率交流电力机车用SIBAS32控制系统、TCN列车通讯网络及其CCU控制软件的结构,分析机车网侧部件控制、自动过分相控制、操作逻辑控制、牵引/制动控制等功能,给出了机车故障诊断和调试的方法。
Presented in this paper are the structure of SIBAS32 control system, TCN train communication network and its CCU control soft of type HXD1 high-power AC electric locomotive.
应用推荐