简单介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
Introduces intelligent lighting network system, and sets forth the design of intelligent lighting controller based on ARM microcontroller LPC2104 in detail.
简要介绍网络化灯光控制系统中的一些基本概念和原理，阐述实际工作中所面临的问题。
A brief introduction about some basic concepts and principles for lamplight controlling system through network was presented. Meanwhile, some question marks from real case were expounded as well.
这种包含系统噪声的离散状态空间模型的建立，为网络化控制系统的准确辨识和有效控制奠定了基础。
The building of discrete state-space models including system noise provides a basis for the exact identification and effective control.
本文讨论了一个基于分布式、网络化的微波暗室运动平台控制系统。
The distributed network control system for the movement platform in the microwave darkroom is discussed in this paper.
提出了带有周期通信序列（PCS）的多输入与多输出分布式网络化控制系统的故障诊断方法。
The fault diagnosis of multi-input and multi-output distributed networked control system with periodic communication sequence(PCS)was investigated.
为带时变时延的网络化控制系统提出了一种新的状态反馈控制器的设计方法。
This paper proposes a new method to design state feedback controller for networked control system (NCS) with time-varying delays.
因此很有必要对存在时延的网络化控制系统的稳定性进行分析。
Therefore, it is imperative to analyze the stability of NCS with network-induced delay.
利用全阶线性观测器稳定同时具有网络诱导时延和数据包丢失的网络化控制系统并提高系统的动态性能。
A full-order linear observer was utilized to stabilize the networked control systems with network-induced delays and data packet losses and improve their dynamic performance.
串级控制系统中，控制回路是通过实时网络闭合的，称为网络化串级控制系统。
Cascade control systems wherein the control loops are closed through a realtime network are called networked cascade control systems.
针对网络化控制系统(ncs)具有不确定性的传输迟延与数据丢包特性，设计了一个分布式的网络化控制系统模型。
With regards to the characteristics of uncertain transmission delay and packet dropout of networked control system (NCS), a distributed model is proposed in this paper.
将数据包丢失看成一种特殊的时延，研究了同时具有网络诱导时延和数据包丢失的网络化控制系统的稳定性问题。
Stability of the networked control systems with network-induced delays and packet losses is investigated by considering a packet loss as a special kind of delay.
网络化控制系统中，各种恒定、时变或者随机的网络时延会导致系统控制性能的下降甚至不稳定。
Various constant or time-varying, and even random network time delays can usually deteriorate the control performance and stability of networked control systems.
基于实际工业过程控制，引入了网络化串级控制系统的概念。
Based on practical industrial process control, the concept of networked cascade control system was introduced.
网络控制系统具有结构网络化、节点智能化、控制现场化、功能分散化、系统开放化和产品集成化等特点。
The network control has many characteristics, frame network of node, intelligence of node, locale of control, decentralization of function. dispark of system, integration of product, and so on.
本文主要研究了基于模型的网络化输入多率采样控制系统的建模、分析与控制问题。
The modeling, analysis and control of the model-based networked control systems (NCSs) with multi-rate input sampling are studied in this dissertation.
针对含执行器饱和网络化控制系统，研究其镇定问题与L_2增益分析。
This paper deals with the problem of stabilization and L_2-gain analysis of networked control systems subject to actuator saturation.
针对网络化控制系统中存在的网络诱导时延问题，提出了一种离散滑模控制方法。
A discrete sliding mode control is proposed for the problem of network-induced time delays in networked control systems.
为了改进网络化多轴同步控制系统的性能，研究了运动控制网络的时钟同步方法。
In order to improve the performance of networked multi-axis motion control systems, the clock synchronization method of motion control networks was studied.
本文是针对一类有网络延时的网络化控制系统，研究其故障容错控制问题。
This paper deals with fault tolerant control of a Networked control Systems (NCS) problem with network delay.
介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
Intelligent lighting network system was introduced, with emphasis on the design of intelligent lighting controller based on ARM microcontroller LPC2104.
首先，本文给出了网络化控制系统的概念及其模型，分析了其优缺点。
Firstly, the concept and model of networked control system is given. After that, the article makes an analysis of its advantages and disadvantages.
基于DSP与高速单片机m CU设计了一种嵌入式远程网络化电机控制系统。
Designed an embedded and remote network motor control system based on DSP and MCU.
神光III控制系统就是网络化控制技术在武器装备上的一个典型应用；
Shenguang III control system is a typical application of networked control technology in weaponry arming.
研究了一类具有网络诱导时延和参数不确定性网络化控制系统鲁棒容错控制问题。
The problem of robust fault-tolerant control for networked control systems (NCS) with uncertain time-delay and uncertain parameter is studied.
在用以太网作为传输媒体的计算机网络化控制系统的基础上，提出了一种基于智能代理技术有双控制器的计算机网络化控制系统。
Computer networked control system with Ethernet is taken as a transfer medium, a computer networked control system with dual controllers based on Intelligent Agent technology is proposed.
最后对本文的主要工作进行了总结，并指出了网络化控制系统中有待进一步研究的问题。
Finally, the research conclusions are presented and the remaining problems that need further research of NCS are pointed out in this thesis.
采用自适应预测控制的方法对带有随机时延的网络化控制系统进行分析和研究。
In this paper, a novel adaptive predicted control method was proposed to analyze NCS (networked control system) with random delays.
其次，研究了网络化控制系统周期性任务的调度算法。
Secondly, the scheduling algorithms of the periodic task of NCS are studied.
其次，研究了网络化控制系统周期性任务的调度算法。
Secondly, the scheduling algorithms of the periodic task of NCS are studied.
应用推荐