该产品适用于贮罐容器和大口径管道的保温。
The product is suitable for storage containers and large diameter pipe heat preservation.
分析了液化石油气贮罐在设计过程中，不同的工作环境真空校核问题。
Vacuum checking problems under the different working environments were analyzed in the design process of liquefied petroleum accumulator pot.
试验证实，所选焊接材料及工艺完全能满足大型原油贮罐的设计要求。
It was proved that the selected consumables and technology fulfilled the requirements of large oil storage tank design.
192不饱和聚酯树脂是为缠绕工艺成型玻璃钢管道、贮罐制品专门开发的一种邻苯型树脂。
HCH-192 unsaturated polyster resin moding process is winding glass pipe and tank products specifically developes a type of benzene resin.
通过工程实践，介绍大型磷酸贮罐底部结构的设计方法。
Introduces the design method for bottom structure of large scale phosphoric acid storage tank based engineering practice.
本文对在用液化石油气贮罐产生裂纹的原因进行分析，并提出了一些减少此类裂纹产生的办法。
Analyse the reasons causing cracking of the LPG. tank in service, methods of lessen the occurrence of this sort of cracks are also given.
用于固体火箭发动机壳体和工业贮罐的纤维缠绕压力容器，爆破压强是重要的设计参数。
The burst pressure of filament wound pressure vessels which is applied to solid rocket motor case and gas tank in industry is an important design parameter.
这些是轻质贮罐和飞机的附属构件。
These are lightweight storage tanks and secondary structures in aircraft.
对六种常用贮罐的计量进行了计算式推导，并设计了计量计算程序。
Authors derive the calculation formula for metering of six types of ordinary storage tanks and develop the calculation program for metering.
通过对低温绝热贮罐罐体的吸附器结构的改进及其分子筛充装工艺措施的完善，较好地解决了在绝热空间其分子筛活化、 再生困难的问题。
Improve the structure of absorber in cryo- insulated storage tank, change the filling process of sieve sorbent, so as to decrease the difficulty of activation of sieve sorbent in an insulated space.
本文介绍了基础砂垫层不实造成现场缠绕大型贮罐变形破坏的原因和处理方法。
This article describes how the sand pad in the foundation fails to support the bottom of lange GRP tanks and how to do with it.
概括介绍了防静电涂料的功能、分类以及石油产品贮罐对防静电涂料的特有要求。
The functions and classification of the anti-static coatings and special requirements of product oil tanks on antistatic coatings were described.
为防止大型圆筒形钢制贮罐底板的焊接变形，可从底板的结构设计、焊接方法等方面加以解决。
Such factors as structure design and welding method are taken into consideration to prevent bottom plate of large circular storage tank made of steel from deformation during welding.
结果表明，该方法精度高、使用简单、适用于一切玻璃钢管道、贮罐、容器等壁厚的在线自动化检测。
Results show that it is of high precision and simple operation and applicable for automatic on-line wall thickness testing of various fiberglass pipelines and vessels.
该方法采用一个中间贮罐用来接收各单元操作的排水，增加各单元操作之间的水再利用机会。
An intermediate tank is used to receive the discharge water from each process and provide water to operations in batch processes, which increased reuse of process discharge streams.
真空多层绝热式生啤酒贮罐是一种无需任何制冷装置、结构简单的销售贮酒罐。
Vacuum multilayer adiabatic beer tank is simple in structure, it does not require any additional refrigerating device.
本文介绍了埋地式卧式液化石油气贮罐的特点及设计，认为有必要在我国推广应用。
The thesis introduces the design of the horizontal underground liquefied petroleum gas container and the characteristics of it.
提出了一种针对已建的地面钢质贮罐底板防腐蚀的阴极保护新技术。
A novel installation technique for cathodic protection of soil side bottom of existing above ground storage tank has been developed.
本文从工艺原理、设备、安全及经济分析方面，提出环氧乙烷贮罐变压运行的方案。
Based on the process principle, equipment, safety and economic analysis, options for ethylene oxide (EO) storage tank operating at variable pressures are put forward.
文章以安亭煤气厂的液化石油气气化站的例子，探讨了贮罐等的置换方法。
Taking Anting gas works LPG station as an example to discuss tank displacement ways.
本文介绍了具有内外侧板的大型贮罐盘梯放样的数学计算、地面平台放样与制造的方法。
In this paper, the lofting and manufacture methods of platform as well as the lofting calculation of winding ladder in large tanks with inner and outer side baffles were introduced.
讨论了LPG贮罐发生泄漏事故时采取的注水堵漏工艺。
The discussion of water injection process to seal leakage occurred in LPG tank was carried out in this article.
本文简述了PP/FRP贮罐的开发性研究，并取得了满意的结果。
The paper describes briefly the study of exploitability of PP/FRP tank, and the result is satisfied.
介绍了热固性增强塑料作钢贮罐防护衬里的设计及制作过程，并通过对防护方案的分析比较，探讨了运用技术经济分析择优选用最佳经济技术方案的方法。
By analyzing and comparing different schemes of corrosion protection, the way to choose with priority for the best economic and technical scheme using technical economy analysis was discussed.
本文介绍了一种适合于易燃易爆液体贮罐的光纤液位测试系统。
This paper describes a fibre optic liquid level measuring system. It is applicable to the storage tank that is easy to burn and explode.
本文介绍了大型内浮顶贮罐贮放多种不同介质时，密封结构在内浮顶上位置的设计方法。
In this paper, the method for determining the position of the sealing structure in large inside floating ceiling tank is introduced.
本文从选材及工艺的角度对耐强碱玻璃钢贮罐的设计进行了分析与研究，并进行了实验论证。
From material choice and process, the design of alkali-resistant large FRP storage tank is studied, and proved by experiment.
框架和贮罐(140)上的配合部分导引贮罐出口与泵入口管接合。
Mating portions on the frame and tank (140) guide engagement of a tank outlet with a pump inlet tube.
这种粘合剂对金属有很好的粘合力，因此，应用在化工贮罐防腐方面是行之有效的方法之一。
The binder has very good adhesion to metals. It is therefore very effective in anticorrosion of chemical storage tanks.
本文主要阐述了性能优良、应用广泛的复合型环氧树脂粘合剂，在化工贮罐、防腐涂层的工艺和方法。
The paper introduces good quality and multiple-use complex epoxy resin binder and its application in anti-corrosion coating of chemical storage tanks.
应用推荐