对应默认的非缓冲特性。
ZeroBuffer, which corresponds to the default non-buffering characteristic.
复合泡沫塑料是新型的发泡塑料，对其缓冲特性进行评定具有重要的意义。
Syntactic foam is a new kind of foamed polymer. It is very important to value its cushioning properties.
使用DASP数据采集与分析软件，对新型涡流磁阻尼月球着陆器原理模型的缓冲特性进行了试验测试。
Buffer characteristics of the principle models of the novel lunar lander with magnetic damping of eddy current were tested by means of the DASP software to collect and analyze data.
本文介绍了针阀式缓冲气缸和溢流式缓冲气缸的结构及工作原理。通过仿真计算比较了它们的缓冲特性和吸收冲击的能力。
The structure and principle of needle valve cushion and relief valve cushion were introduced. Cushion performance and capacity of absorbing impact were compared by simulation.
对研发的膨胀珍珠岩缓冲衬垫进行了静态压缩和蠕变性能试验研究，并与EPE和EPS衬垫的静态缓冲特性进行了对比分析。
The static buffering and creep properties of the expanded perlite cushion were tested and researched, and the static buffering property was contrasted with that of EPE, EPS and honeycomb cardboard.
尽管这里详细描述的步骤有助于性能测试门户时对RationalPerformance Tester的理解和使用，它们根本不考虑高速缓冲特性。
Although the steps here are described in detail to help you understand and use Rational performance Tester for performance testing portlets, they don't take the caching features into account.
Ada一般会检测和防止缓冲区溢出(即针对这样的尝试引发一个异常)，但是不同的程序可能会禁用这个特性。
Ada normally detects and prevents buffer overflows (raising an exception on the attempt), but various pragmas can disable this.
管道的另一个重要特性是：它是进行缓冲处理的。
Another important feature of the pipe is that it is buffered.
共集-共基组合放大电路具有良好的宽带放大特性，既可以作为缓冲级又能够提供一定的电压和电流增益。
The CC-CE combined amplifier has the nicer wide band magnifiable characteristic qua the buffer and gives some gains in voltage and electric current.
其它特性包括：集成缓冲用来驱动基准电压，以及集成完全差动放大器用来缓冲调制器输入并进行电平转换。
Other features include an integrated buffer to drive the reference as well as a fully differential amplifier to buffer and level shift the input to the modulator.
通过对模型参数特性的分析，提出了一种新颖的、应用于工程车辆的仿生阻尼缓冲悬挂机构。
Through analyzing the characteristics of the model parameters, a neoteric bionics damping and buffering suspension is developed and applied to construction vehicles.
缓冲材料的物理特性与厚度对苹果的碰撞损伤有显著的影响。
The physical properties and thickness of cushion materials have remarkable influence on impact bruise.
介绍一种使用微电子技术制造的二氧化钛电极，并且研究了该电极在磷酸缓冲液中的电化学特性。
In this paper a planar titanium oxide electrode was fabricated by standard microelectronic technology and its electrochemical properties in phosphate buffer solution was investigated.
生物膜吸附苯酚、对硝基苯酚的过程中表现出对酸、碱的缓冲能力，具有两性表面特性。
During the adsorption procedure, surface coatings showed amphoteric properties and can buffer the acids or alkalis in the solution.
泡沫铝芯体夹层板与泡沫铝相比，具有更高的屈服极限和更好的缓冲吸能特性。
Compared with aluminum foam, sandwich beams with aluminum core is characterized in higher limited yield stress and better cushion energy absorbing property.
麻秆芯缓冲包装材料具有优良的抗蠕变特性。
The Kenaf core buffer packing material has a fine anti-creep property.
利用瓦楞纸本身的特性以及结构的支撑力来保护内容物，不再需要多馀的缓冲材包覆产品。
Utilize the characteristic of the corrugated paper and the supporting strength of the structure to protect the product, surplus buffer materials are no longer needed.
在分析中小屏幕TFT - LCD驱动芯片的负荷特性的基础上，提出了一种新型的驱动电压输出缓冲电路结构。
Based on the detailed analysis of the loading properties of a medium or small size TFT-LCD driver IC, a novel output buffer circuit of driving voltages is proposed.
研究了玻璃纤维增强环氧圆柱管作为缓冲装置的撞击吸能特性，并与铝合金圆柱管的吸能特性进行比较。
The crashworthiness of grass fiber reinforced epoxy tubes as collision bumper is studied and a comparison of absorption property with aluminum alloy tubes is made.
试验对深水岩塞爆破后缓冲坑泄渣的水力特性进行了研究。
The model test aimed to study hydraulic characteristics of buffer pit ballast discharge after rock clog in deep water was blasted.
该阻尼特性虽然依赖于缓冲包装材料但并不唯一取决于缓冲包装材料。
The damping property depends on but not limit to the cushioning materials of the packing system.
缓冲长度对系统动态特性的影响与缓冲间隙有关。
The cushion length's influence on system's dynamic characteristic is affected by the cushion clearance.
我们公司生产的缓冲垫采用天然橡胶或低压缩变形，高密度的聚氨酯泡沫体，该产品具有独特的设计特性，可处理不同的机械能量控制问题。
Natural rubber or fine-celled low compression-set, high density polyurethane foams, offer unique combinations of design features for difficult mechanical energy control problems.
本论文从工程应用出发，对越野车辆液压缓冲器的特性与检测方法进行了研究。
Aiming at technical application, the paper has studied the characteristic and test method of cross country vehicle-hydraulic bumper.
测量了它的光谱特性以及它与钠原子密度，入射激光参量，缓冲气体密度的关系。
The relation between this emission and the density of Na, the parameters of laser and the pressure of the buff re gas have been studied.
EP -EPS缓冲包装材料的静态性能呈现非线性曲线的特性，基本形状与正切曲线相类似。
The static performance of EP-EPS cushioning packaging materials renders non-linear curve, the basic shape is similar to the tangent curve.
在分析泡沫材料动力学特性的基础上，利用试验方法对缓冲垫的缓冲性能进行了分析和评价。
Based on the analysis of the dynamic characteristic of the EPS, the performance is analysised and evaluated by the experimental methods.
通过试验方法研究了泡沫铝填充薄壁金属管塑性变形缓冲器在准静态作用下的吸能特性。
Energy absorption characteristic of a plastic deformation energy absorber filled with aluminum foam in a thin-wall metal tube under quasi-static state was studied by test method.
换流阀内可控硅端电压分布特性取决于可控硅器件性能和相应的缓冲电路参数。
Both performance of thyristor and parameters of snubber circuit significantly affect voltage distribution in HVDC thyristor valve.
换流阀内可控硅端电压分布特性取决于可控硅器件性能和相应的缓冲电路参数。
Both performance of thyristor and parameters of snubber circuit significantly affect voltage distribution in HVDC thyristor valve.
应用推荐