新安全限制装置的建筑结构是碳钢，通过给内外层镀上不锈钢来保护它。
The structure of the New Safe Confinement is carbon steel, protected by inner and outer layers of stainless steel cladding.
作为标准配置，上部结构材质是碳钢。
为防止混凝土结构的安全壳泄露，其内部有碳钢的衬垫。
A carbon steel liner is utilized to provide a leak proof vapor barrier for containment of concrete construction.
六角网是由优质低碳钢丝制成，此网结构坚固，表面平坦。
Hexagonal wire mesh is made of low carbon steel wire, solid structure, and smooth surface.
焊接较重要的低碳钢结构。
利用该模型，采用复合形优化法，用QBASIC语言编程，在安装热管的面积一定状况下对碳钢-水热管换热器的结构进行优化。
QBASIC was used to make procedure, structure of heat pipe was optimized with complex method on condition that the area of fixing heat pipe was invariable.
同时，采用电化学阻抗等测试技术，研究了碳钢在SRB腐蚀过程中生物膜结构与腐蚀行为关系。
The relation of the structure of biofilms and corrosion behavior of SRB on carbon steel was also investigated using electrochemical impedance spectroscopy (EIS).
随着由低碳钢构成的机械承载结构裂纹问题的日益严重，研究机械承载结构裂纹诊断、控制与维修已成为故障诊断学领域的新热点。
With the severity of crack problems increasingly of structures, which are made up of soft steel, to study diagnosis, control, and maintain of the crack, is a new hotspot in fault diagnosis areas.
这种情况在低碳钢丸中没有发生因为他们有不同的结构。
This kind of situation is not happened in the low carbon steel shot. Because they have different structure.
用于焊接较重要的低碳钢结构和强度等级较低的低合金钢。
Suitable for welding of critical structures of low carbon steel and low-grade strength of low alloy.
特别适合于家具、钢结构、车辆、五金等行业中焊接低碳钢、低合金钢、不锈钢等金属材料。
Especially suitable for furniture, steel, vehicles, hardware. other industry to welding the low carbon steel, low alloy steel, stainless steel and other metal material.
本文主要阐述了碳钢、低合金结构钢、不锈钢、铸铁等金属材料的焊接技术。
This article focuses on the welding technology of the carbon steel, low alloy steel, stainless steel, cast iron and other metal materials.
在碳钢表面制备了具有梯度结构的PPS/FEP复合防腐蚀涂层，采用拉开法测定了各涂层体系的结合强度。
The gradient PPS/FEP composite anti-corrosive coatings were prepared on carbon steel. The bonding strength of all coating systems was determined by the pull-off test.
研究了超低碳钢保护渣的显微组织结构特征，并根据相图分析了熔渣的结晶性能。
The characteristics of the microstructure on super low carbon steel powder has been studied, and the crystallization performance of slag analysed by phase diagram.
结构钢，碳钢，低合金钢，鉄素体和马氏体不锈钢。
Structural steels, Carbon content. Low-alloy steels. Ferritic and martensitic stainless steels.
该焊丝用于焊接低碳钢和低合金钢结构，如船舶、车辆、桥梁、工程机械、锅炉和压力容器等。
The welding wire is used for welding low carbon structural steel and low alloy steel. Such as ships, Bridges heavy-duty machines, boilers and pressure vessel etc.
焊接较重要的低碳钢结构。
鄂式闸门采用优质碳钢焊接成形，结构独特，运行灵活可靠，无卡阻现象。
The valve is welded in fine steel, having the features of peculiar structure, non-obstruction, reliable and flexible operation.
标准配置的上部结构材料是碳钢。如果要订购304不锈钢上部结构，请将订购型号上的“CS”更换为“S1”。
Standard superstructure is carbon steel. To order 304 stainless steel superstructure, replace "CS" code from sizing chart with "S1".
熔敷金属力学性能优良，用于中碳钢和低合金钢重要结构的焊接，如压力容器、桥梁及船舶结构。
The deposited metal has excellent mechanical properties. It is used for welding middle-carbon and low-alloy steel structure, such as pressure containers, bridges, and ship structure.
利用等离子弧对低碳钢表面预涂的铁基自熔性合金粉末进行了熔覆处理，并对熔覆层的组织结构和性能进行了分析研究。
The self molten Fe base alloy powder on low carbon steel precoated sheet was melted by thermal plasma arc. The microstructure and hardness of the clad coating were analyzed.
特性：Q235钢属于低碳钢，是最通用的工程结构用钢之一。具有一定的强度、塑性、焊接性良好。
Characteristic: Q235 steel is lowcarbon steel and usually used in engineering structure with a certain extent of strength , plasticity and good weldability.
设计理念主要采用非常有限的材料，连接二楼夹层的扶手和楼梯采用碳钢结构设计，并在收银台后方打造一处搁架。
Thee design language is based on a limited range of materials: black steel forms the handrail of the second floor mezzanine as well as the staircase, and creates a shelf behind the cashier.
介绍了新型低碳钢铸件表面防渗碳涂料的组成结构、生产工艺、性能特点和应用实例。
The compose, producing technology, properties and application example of new carbon-impervious coatings for low-carbon steel castings are introduced in this paper.
公司生产和安装的设备以及结构件材料主要有碳钢、不锈钢、钛、镍基合金以及各种复合材料等各种有色金属。
The main materials of equipment , piping and construction parts are carbon steel, stainless steel, aluminum, titanium, nickel and nickel alloy, and special clad material.
该系列焊丝主要适用于焊接低碳钢和低合金钢结构。
The series of welding wires are mainly suitable for welding low alloyed steel structure.
系列枪式点焊机广泛应用于大型网板和大型钢板结构件的成形点焊，可焊接低碳钢、不锈钢、铜、铝等金属圆材及板材。
QDN series gun-spot welder is widely used in the complete welding of the structures of large halftone and large steel plate.
该焊丝用于焊接低碳钢和低合金钢结构，如船舶、工程机械、压力容器等。
The welding wire is used for welding low carbon structural steel and low alloy steel. Such as ships, heavy-duty machines, pressure vessel etc.
该焊丝用于焊接低碳钢和低合金钢结构，如船舶、工程机械、压力容器等。
The welding wire is used for welding low carbon structural steel and low alloy steel. Such as ships, heavy-duty machines, pressure vessel etc.
应用推荐