结果表明，该复合膜不仅具有良好的表面相容性，而且具有良好的结构相容性。
All results indicated that the film has not only good surface compatibility but also good structural compatibility. It can be more suitable for GTR technology.
对于衬垫接头，垫圈的结构材料对于使用的气体的相容性和垫圈的机械性能都是很重要的。
With gasketed connections, the material of construction of the washer is important, both for compatibility with the gases in use and for its mechanical properties.
成功制备了硅壳结构的荧光磁性纳米载体，主要分布在细胞浆中，且细胞相容性好。
Silica-coated fluorescent nanocarriers are successfully prepared, which are mainly distributed in cytoplasm , and it has a great cellular compatibility.
最后指出了卫星结构材料高性能、多功能、复合化、智能化、低成本以及高环境相容性的发展趋势。
At last, the development trend of high performance, multi-function, composite, intelligent, low cost and high environment compatibility for satellite structure materials were put forward.
采用表面化学和材料力学方法，探讨了支架的组成、结构、表面特性、力学性质及细胞相容性。
The composition, structure, surface characteristic, mechanical property, and cell compatibility of the scaffold have been studied by using surface chemistry and material mechanics testing methods.
研究几种二元多相共混物的拉伸强度与组分的结构、界面区相容性、共混组成的关系。
The present investigation deals with the relationship of tensile strength with components structure, interfacial compatibility and blend composition.
采用动态力学谱（VES）、示差扫描量热（DSC）、透射电镜（TEM）和扫描电镜（SEM）等测定共混物的微观结构，采用微球柱法评价共混物的血液相容性。
Microphase separated structure of blends has been determined by means of VES. DSC, SEM and TEM. Blood compatibility of the blends was evaluated by column beads method.
本文通过对不同比例的PET和PE组分进行共混，并对所得样品采用DSC、WAXD和SEM 三种方法对试其相容性和相结构。
Through the blending of PET and PE components in different ratios, the resulting samples are studied for their compatibility and phase structure by DSC, WAXD and SEM.
本文揭示了传统网络构图模型系统结构的不相容性，从而实现了传统网络总时差的计算是错误的论证。
This paper shows the incompatability of system structure of the model of the network diagram, thus realizes the demonstration that algorithm for the total float of A on N and A on A is mistaken.
抗凝血生物材料血液相容性研究表明：(1)肝素对维持血细胞及蛋白正常结构的功效显著。
The results of blood compatibility show that: (1) heparin can maintain the structures of hemocyte and plasma proteins.
根据染料的相容性、染色条件以及染料的结构特性来选择拼混染料。
Two kinds of commercial dyes were chosen for combination based on their compatibility, dying conditions and structural features.
目的评估两种不同结构设计的国产铂-铱合金明胶蛋白涂层支架置入兔颈动脉后长期的生物相容性。
Objectives To assess the biocompatibility of the two kinds of different design and wire diameter gelatin coated Platinium Iridium(Pt Ir) stents in rabbit carotid arteries.
在NLC给药系统中，药物与载体以及脂质载体之间的相容性是决定NLC的微观和介观结构，载药能力，稳定性等药剂学性质的关键因素。
In NLC drug delivery systems, the compatibility of drug and lipid carriers is the key element to determine the structure of microscopic and mesoscopic, drug-loading capacity and stability.
前言：对软质聚氯乙烯（ PVC）/ 丙烯腈-丁二烯-苯乙烯共聚物（ABS）合金的力学性能、加工性能进行了测试，并利用差示扫描量热仪和扫描电镜对试样断面结构以及两相的相容性进行了表征。
The mechanical property and processing property of soft PVC/ABS alloy were tested, the fracture surface structure of the sample and compatibility of the two phases were characterized.
此外，还讨论了聚氨酯结构与血液相容性的关系。
Additionally, the relationship between the structure and blood compatibility is discussed.
通过增容或利用不同的聚合物的相容性、反应性差异可使PET/PO之间“自组装”形成特定的形态结构。
Special morphologies of blends of PET/POs can be obtained by self-assemble of POs with various compatibility and reactivity.
并研究了溶剂与聚合物的相容性，以及溶剂的挥发性对蜂窝状孔结构形成的影响。
Moreover, the influence of the compatibility between PPO and Solvents, as well as the volatility of solvents on the pattern regularity was also investigated.
用挤出方法制备了新型聚芳醚酮（PEK-C）和聚醚醚酮（PEEK）共混物。对共混体系的相容性、转变、结晶结构及力学性能等进行了研究。
The compatibility, crystalline structure, transitions and some mechanical properties of PEK-C/PEEK blends were studied by DMS, DSC, X-ray diffraction and Instron.
概述了作为钠冷快堆结构材料和包壳材料的国产奥氏体不锈钢以及作为蒸汽发生器管材的铁素体低合金钢与高温钠相容性研究的主要结果和现状。
Main results and situation of the compatibility investigation for austenic stainless steels and ferritic low alloy steels with high temperature sodium are summarized in this paper.
最后指出了卫星结构材料高性能、多功能、复合化、智能化、低成本以及高环境相容性的发展趋势。
At last, the development trend of high performance, multi-function, composite, intelligent, low cost and high environment compatibility for satellite structure...
本文给出了建立在含幺半群基础上的范畴语法的代数结构 ，定义了范畴方程和它的解并对范畴方程的解作了分类 ：相容性的相关性。
In this article, we showed the algebraic structure of syntactic categories based on monoid and defined categorial equation whose solutions are described by consistency and correlation .
结论：该方法所制备的去细胞神经移植物神经膜管结构保存完好，有良好的组织相容性，可能成为自体神经移植的替代材料。
CONCLUSION: the acellular nerve grafts possess well-conserved structure of neurilemma tube and excellent histocompatibility, and is the possible replaced material for autologous nerve graft.
进一步研究了相容性及相结构与共混纤维微孔结构和亲水性能的关系，得到了一系列重要的结论。
The effects of compatibility and phase structure on porous structure and hydrophilic properties of blend fibers were further investigated. Many important results were obtained.
应用鱼类主要组织相容性复合体（MHC）基因来探讨鱼类种群间遗传结构，寻找分子遗传标记。
The major histocompatibility complex (MHC) of fish was used to study the genetic structure as a molecular genetic marker of four populations of red common carp.
通过DSC、WAXD和POM研究了PTT、PBT共混物在非等温条件下的相容性、结晶结构、结晶性能、结晶度及晶体形态。
DSC, WAXD, POM were performed to study the compatibility, crystallization structures, crystallization properties, crystallinity and crystal morphologies of the blends.
红外光谱、X-射线衍射、扫描电镜分析其结构与组成，对膜进行降解性、溶涨性和兔眼生物相容性实验研究。
Then their structures and composing are analyzed by Fourier transform infrared spectroscopy(FT-IR), X-ray diffraction(X-RD), scanning electron microscopy(SEM).
该镜片能够具有用于生物相容性的高水含量(例如大于70重量%)和耐处理的结构稳定性。
The lens can exhibit high water content such as for example more than 70 wt. % for biocompatibility and structural stability for handling.
超声衰减可表征聚合物共混物的相容性和相形态结构。
Ultrasonic attenuation can characterize the miscibility and phase morphologies of polymer blends.
凝胶浴的浓度和温度、纺丝工艺等都会影响共混体系的相容性并改变膜的结构和性能。
The concentration and temperature of the coagulation bath and spinning conditions all have a great effect on structures and properties of PVDF/PVC hollow fiber membranes.
这种装置的材料血液相容性优良，血室形态、结构设计合理，制作工艺和质量控制严格。
The device is distinguished by excellent polyurethane material, reasonable blood chamber shape, and advanced fabrication process.
应用推荐