初始预应力分布的计算是双层索结构受力分析的基础。
The calculating of initial prestress distribution is basic and important for analyzing of double-layer cable structure.
摘 要 ：FRP-混凝土界面的粘结滑移关系是FRP加固混凝土结构受力分析的基础。
Abstract :The local FRP-to-concrete bond-slip model is the fundamental relation to analyse the behaviour of FRP-strengthened RC structures.
根据实际工程的实时监测结果和结构受力分析，结合现行国家规范，分别给出了上述参数的控制参考限值。
Based on the real-time monitoring, structure analysis and current code, the limit values of those construction parameters are discussed.
明确正弯矩区组合扁梁的受力性能是进行结构分析的基础。
Clearly understanding the capacity of composite slim beam in the sagging moment region is the basis of structural analysis.
在对比了各种分析结果的基础上判定结构的受力状况和安全性能，作出合理可行的加固方案。
Based on varied analysis result, force status and secure performance of structure can be determined, then reasonable and feasible reinforcing design can be made.
本文首先比较系统的分析了各种结构基本型式的受力特点、抗震性能、适用范围、经济性能以及发展前景。
In this paper, we first analyze the stressing feature, resistance to vibration, scope of application, economic performance and developing prospect of main structural form.
对钢缆索的受力状况进行检测，判断和分析钢缆索的结构健康状况，是工程界至今仍未能很好解决但又亟待解决的问题。
The stress inspection of steel cable, and the judgment and analysis of health status of steel cable is an unresolved but desiderated problem in engineering field.
介绍了该桥的总体布置、结构设计、受力分析及施工概况。
In this paper, the overall layout, structural design, stress analysis and construction of the Bridge are dealt with.
利用非线性有限元法分析了密封条的压缩受力变形特性，根据结构力学原理对密封条横截面形状进行了优化。
Using nonlinear finite element method, the compression load deflection of the seal was analyzed and cross sectional shape of the seal was optimized.
介绍对梁体进行的检测、荷载试验，以及对桥梁上部结构及开裂截面的实际受力状况的分析。
In this paper, the inspection, load tests for the beams and analysis of actual mechanical behavior of the superstructure and cracked sections thereof are presented.
从高层建筑抗侧力体系出发，通过丰富的实例，分析了巨型结构体系的各种形式和受力特点。
Based on the lateral force resisting system of high rise building, through abundant examples, this paper analyzes the types and internal force characteristics of megastructure systems.
本文介绍了轴销剪切式称重传感器的结构与特点，受力分析与理论计算。
This article introduces structure, characteristic, stress analysis and theoretical calculation of shaft pin cutting type load cell.
索穹顶结构是大变形柔性组合结构，其受力分析属于几何非线性问题，求解较复杂。
Cable dome is a large deformation composite structure consisted of flexible cables. Its analysis is a geometric nonlinear problem and is difficult in its solution.
本文详细介绍了槽钢锁口一次冲压成型模具结构的特殊性，定位方式及受力分析。
This paper introduces the construction speciality, positioning method and stress analysis on primary pressing model of the bar cut.
分析了制动装置的工作原理，并对其结构做了受力分析和优化。
Analyse the working principle of the brake device in the passage, and force analysis and optimization for the structure.
简要介绍内河新型单船标的材料性能、结构设计、平衡机理、受力分析。
The material characteristics, structural design, balance mechanism and stress analysis of inland river new-type buoy are briefly introduced.
本文扼要地介绍了拖拉机后桥部分提升机构的结构原理，并通过受力分析导出了计算方程。
This paper briefly introduces the structural principles of lifting mechanism of the tractor's rear axle and the equations of calculation have been derived from force analyses.
在该系统中把结构方案设计、荷载计算、受力分析、配筋计算、施工图绘制集成为一体。
In this system the structure plan design, the load computation, the stress analysis, matches the muscle calculation, the construction drawing plan integration as a body.
不同的桁架节点形式，分析了桁架腹杆两端与弦杆的连接和弦杆与柱连接形式对结构受力性能的影响。
Different node form, the connection of web to truss chords and connection of truss chords to frame column are discussed.
针对TBM施工隧道仰拱预制块的特殊结构，采用围岩-结构模式，进行了模拟施工动态的受力影响计算分析。
According to the special structure of precast block of inverted arch for TBM construction tunnel, the dynamic construction state is modeled by FEM with surrounding rock - structure calculating model.
通过对静电封接结构的受力分析，建立了静电封接后弹性膜片的热失配应力数学模型。
The stress of anodic bonding is analysed and the math model of no match thermal stress about anodic bonded elastic diaphragm is built.
用有限元数值模型，分析隧道断面上8个不同位置10种不同水压突水条件下衬砌结构的受力特征。
Mechanical behavior of lining structure is analyzed under 10 different conditions that high water pressure suddenly effluent water upon 8 different parts of tunnel section with FEM numerical model.
通过试验和解析方法对粘贴碳纤维布加固修复钢结构技术的粘结界面受力性能进行了分析，提出粘结界面剪切应力的计算公式，并在实际算例中取得了与试验较为吻合的结果；
Through tests and analysis of the adhesive interface performance of steel structure with CFRP, the paper sets up an expression of adhesive interface shear stress, which is validated by the tests.
最后从结构、受力、油路和密封等方面分析了设计过程中需要解决的问题。
Some problems that need to be solved in design procedure were analyzed from structure, validation, routing and sealing aspects.
对滚珠丝杠和工作台结构在高速运动下受力状态进行分析建立了力学模型。
State of force is analysed and kinematics model is established about table and ball-screw in high-speed motion.
针对我国既有铁路隧道铺底病害严重的现状，采用弹性支承法，对铁路隧道铺底结构的受力状态进行分析。
In view of the severe situation about the bed disease in the existed railway tunnel, the mechanics condition on the railway tunnel bed was analyzed by using the elastic bearing method.
对板桁结构的各结构体系受力分析的目的是为了在设计过程中能根据各体系的受力特点，对不同的构件进行有针对性的设计。
The purpose of analyzing the force bearing of various structure systems of the plate and truss structures is to design specifically for different structures according to the features of force bearing.
车架结构运用有限元分析技术，工作受力部位采用增强刚度和强度结构。
Finite element technology adopted in frame makes more strength in working stress position.
分析了目前单体液压支柱结构上存在的问题，介绍了新型单体液压支柱活柱体的结构及特点，并进行了受力分析。
Some problems of old hydraulic prop are analyzed. The structure and characteristic of new prop are introduced, and then the stress analysis is done.
因此要重视结构构件的受力机理，加强结构构件的构造设计，充分利用力学原理分析和解决实际工程问题。
So we should attach importance force mechanism and enhance constitution design of structure member, and apply mechanics principle to analysis and settle practical problems.
应用推荐